YIXIN MB8F Miniature glass passivated single-phase surface mount bridge rectifier Datasheet

A ll data sheet.com
MB05F THRU MB10F
MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
REVERSE VOLTAGE: 50 to 1000 VOLTS
FORWARD CURRENT: 0.5 AMPERE
MBF
.071(1.8)
.055(1.4)
FEATURES
C0.5
.043(1.1)
.027(0.7)
.276(7.0)
.260(6.6)
.157(4.0)
.142(3.6)
- +
~ ~
· Surge overload rating: 30 amperes peak
· Ideal for printed circuit board
· Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
· Low leakage
· Reliable low cost construction utilizing molded
.030(0.75)
.018(0.45)
.014(.35)
.006(.15)
.106(2.7)
.09(2.3)
MECHANICAL DATA
Case: Molded plastic, MBF
Epoxy: UL 94V-O rate flame retardant
.197(5.0)
.181(4.6)
Terminals: Leads solderable per MIL-STD-202,
method 208 guaranteed
Mounting position: Any
.063(1.6)
.047(1.2)
.008(0.2)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25 ℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60H Z, resistive or inductive load.
MB05F
MB1F
MB2F
MB4F
MB6F
MB8F
MB10F
Units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward Rectified Current
(see Fig. 1)
on glass-epoxy P.C.B (Note 2)
I(AV)
0.5
0.8
Amp
IFSM
30
Amp
VF
1.0
Volts
on aluminum substrate (Note 3)
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage
at 0.4A DC and 25℃
Maximum Reverse Current
at TA=25℃
at Rated DC Blocking Voltage
T A=125℃
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 3)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
IR
5.0
500
uAmp
CJ
13
pF
RθJA
60
℃/W
RθJL
16
℃/W
TJ,Tstg
-55 to +150
℃
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
3- On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
A ll data sheet.com
MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER
Characteristic Curves (TA=25 ℃ unless otherwise noted)
Similar pages