HDSP-F15x Series 10 mm (0.40 inch) Seven Segment Displays Data Sheet HDSP-F15x/F16x Series HDSP-F20x/F30x/F40x/F50x Series HDSP-G00x/G15x Series HDSP-G20x/G30x/G40x/G50x Series Description The 10 mm (0.40 inch) LED seven segment displays are Avago’s most space-efficient character size. They are designed for viewing distances up to 4.5 metres (15 feet). These devices use an industry standard size package and pinout. The dual numeric, single numeric, and ± 1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. Typical applications include instruments, point of sale terminals, and appliances. • Categorized for luminous intensity Yellow and Green categorized for color Use of like categories yields a uniform display • High light output • High peak current • Excellent for long digit string multiplexing • Intensity and color selection option • Sunlight viewable AlGaAs Features • Industry standard size • Industry standard pinout 7.6 mm (0.3 inch) DIP single 15.24 mm (0.6 inch) DIP dual Leads on 2.54 mm (0.1 inch) centers • Choice of colors AlGaAs Red, High Efficiency Red, Orange, Yellow, Green • Excellent appearance Evenly lighted segments Mitered corners on segments Gray package gives optimum contrast Black surface and color tinted epoxy (HDSP-F161 only) ±50° viewing angle • Design flexibility Common anode or common cathode Single and dual digits Right hand decimal point ±1. overflow character Devices AlGaAs Red[1] HDSP- HER HDSP- Orange HDSP- Yellow HDSP- Green HDSP- F151 F201 F401 F301 F501 F161 Description Package Drawing Common Anode Right Hand Decimal A Common Anode Right Hand Decimal A F153 F203 F403 F303 F503 Common Cathode Right Hand Decimal B F157 F207 F407 F307 F507 Common Anode ± 1. Overflow C F158 F208 F408 F308 F508 Common Cathode ± 1. Overflow D G151 G201 G401 G301 G501 Two Digit Common Anode Right Hand Decimal E Two Digit Common Cathode Right Hand Decimal F G153 G203 G403 G303 G503 Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-F10X data sheet for low current operation. Part Numbering System 5 0 8 2 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options[1] 00: No mechanical option 16: Special dimensional tolerances Color Bin Options[1,2] 0: No color bin limitation Maximum Intensity Bin[1,2] 0: No maximum intensity bin limitation Minimum Intensity Bin[1,2] 0: No minimum intensity bin limitation Device Configuration/Color[1] 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to respective data sheet Package[1] F: 10 mm (0.4 inch) Single Digit Seven Segment Display G: 10 mm (0.4 inch) Dual Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. 2 Package Dimensions 3 Internal Circuit Diagram FUNCTION FUNCTION PIN B C D 1 ANODE[1] A CATHODE[2] ANODE[1] CATHODE[2] 2 CATHODE f ANODE f CATHODE PLUS ANODE PLUS 3 CATHODE g ANODE g CATHODE MINUS ANODE MINUS 4 CATHODE e ANODE e NC NC 5 CATHODE d ANODE d NC [1] [2] NC [1] [2] 6 ANODE CATHODE ANODE CATHODE 7 CATHODE DP ANODE DP CATHODE DP ANODE DP 8 CATHODE c ANODE c CATHODE c ANODE c 9 CATHODE b ANODE b CATHODE b ANODE b 10 CATHODE a ANODE a NC NC PIN E 1 E CATHODE NO. 1 E ANODE NO. 1 F 2 D CATHODE NO. 1 D ANODE NO. 1 3 C CATHODE NO. 1 C ANODE NO. 1 4 DP CATHODE NO. 1 DP ANODE NO. 1 5 E CATHODE NO. 2 E ANODE NO. 2 6 D CATHODE NO. 2 D ANODE NO. 2 7 G CATHODE NO. 2 G ANODE NO. 2 8 C CATHODE NO. 2 C ANODE NO. 2 9 CP CATHODE NO. 2 DP ANODE NO. 2 10 B CATHODE NO. 2 B ANODE NO. 2 11 A CATHODE NO. 2 A ANODE NO. 2 12 F CATHODE NO. 2 F ANODE NO. 2 13 DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE 14 DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE 15 B CATHODE NO. 1 B ANODE NO. 1 16 A CATHODE NO. 1 A ANODE NO. 1 17 G CATHODE NO. 1 G ANODE NO. 1 18 F CATHODE NO. 1 F ANODE NO. 1 NOTES: 1. REDUNDANT ANODES 2. REDUNDANT CATHODES HOLE PATTERN FOR PCB LAYOUT TO ACHIEVE UNIFORM 0.450 IN. DIGIT TO DIGIT PITCH. FOR HDSP-FXXX TO HDSP-GXXX. 4 Absolute Maximum Ratings Description AlGaAs Red HDSPF15x/F16x G15x Series HER/Orange HDSPF20x/G20x/ G40x Series Yellow HDSPF30x/G30x Series Green HDSPF50x/G50x Series Units Average Power per Segment or DP 96 105 80 105 mW Peak Forward Current per Segment or DP 160[1] 90[3] 60[5] 90[7] mA DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 30[8] mA Operating Temperature Range –20 to +100[9] °C –40 to +100 –55 to +100 °C Reverse Voltage per Segment or DP 3.0 V Wavesoldering Temperature for 3 Seconds (1.59 mm [0.063 in.] below body) 250 °C Storage Temperature Range Notes: 1. See Figure 1 to establish pulsed conditions. 2. Derate above 46°C at 0.54 mA/°C. 3. See Figure 6 to establish pulsed conditions. 4. Derate above 53°C at 0.45 mA/°C. 5. See Figure 7 to establish pulsed conditions. 6. 7. 8. 9. Derate above 81°C at 0.52 mA/°C. See Figure 8 to establish pulsed conditions. Derate above 39°C at 0.37 mA/°C. For operation below -20°C, contact your local Avago components sales office or an authorized distributor. Electrical/Optical Characteristics at TA = 25°C AlGaAs Red Device Series HDSPF15x/ F16x/ G15x 5 Parameter Symbol Min. Typ. Luminous Intensity/Segment[1, 2, 5] (Digit Average) IV 7.5 15.0 Forward Voltage/Segment or DP VF 1.8 λPEAK 645 nm Dominant Wavelength[3] λd 637 nm Reverse Voltage/Segment or DP[4] VR 15 V Peak Wavelength 3.0 Max. 2.2 Units Test Conditions mcd IF = 20 mA V IF = 20 mA Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 320 °C/W/Seg IR = 100 µA Electrical/Optical Characteristics at TA = 25°C, continued High Efficiency Red Device Series HDSPF20x/ G20x Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2] (Digit Average) IV 420 1200 Forward Voltage/Segment or DP VF 2.0 λPEAK 635 nm Dominant Wavelength[3] λd 626 nm Reverse Voltage/Segment or DP[4] VR 30 V Peak Wavelength 3.0 Max. 2.5 Units Test Conditions µcd IF = 5 mA V IF = 20 mA Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 320 °C/W/Seg IR = 100 µA Orange Device Series HDSPF40x/ G40x 6 Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2] (Digit Average) IV 420 1200 Forward Voltage/Segment or DP VF 2.0 lPEAK 600 nm Dominant Wavelength[3] ld 603 nm Reverse Voltage/Segment or DP[4] VR 30 V Peak Wavelength 3.0 Max. 2.5 Units Test Conditions µcd IF = 5 mA V IF = 20 mA Temperature Coefficient of VF/Segment or DP ∆VF/°C -2 mV/°C Thermal Resistance LED Junction-to-Pin Rl\qJ-PIN 320 °C/W/Seg IR = 100 µA Electrical/Optical Characteristics at TA = 25°C, continued Yellow Device Series HDSPF30x/ G30x Parameter Symbol Min. Typ. 290 800 Luminous Intensity/Segment[1,2] (Digit Average) IV Forward Voltage/Segment or DP VF 2.2 λPEAK 583 Peak Wavelength Max. 2.5 Units Test Conditions µcd IF = 5 mA V IF = 20 mA nm Dominant Wavelength[3,6] λd 581.5 586 Reverse Voltage/Segment or DP[4] VR 3.0 40 V 592.5 nm Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 320 °C/W/Seg IR = 100 µA High Performance Green Device Series HDSPF50x/ G50x Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2] (Digit Average) IV 1030 3500 Forward Voltage/Segment or DP VF 2.1 λPEAK 566 Dominant Wavelength[3,6] λd 571 Reverse Voltage/Segment or DP[4] VR Peak Wavelength 3.0 Max. 2.5 Units Test Conditions µcd IF = 10 mA V IF = 10 mA nm 577 nm 50 V Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 320 °C/W/Seg IR = 100 µA Notes: 1. Case temperature of device immediately prior to the intensity measurement is 25°C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series. 6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 7 AlGaAs Red IDC MAX. – MAXIMUM DC CURRENT PER SEGMENT – mA 50 RθJ-A = 770°C/W 45 AlGaAs RED 40 35 30 25 20 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 IF – FORWARD CURRENT PER SEGMENT – mA Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – AlGaAs Red. 160 140 120 AlGaAs RED 100 80 60 40 20 0 0 0.5 Figure 2. Maximum Allowable DC Current vs. Ambient Temperature. 1.75 1.50 1.25 1.00 AlGaAs RED 0.75 0.50 0.25 0 5 10 15 20 25 30 35 40 2.0 2.5 3.0 3.5 4.0 1.4 1.2 1.0 0.8 AlGaAs RED 0.6 0.5 1.0 IF – FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative Luminous Intensity vs. DC Forward Current. 8 1.5 Figure 3. Forward Current vs. Forward Voltage. ηPEAK – NORMALIZED RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 20 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 2.00 0 1.0 VF – FORWARD VOLTAGE – V TA – AMBIENT TEMPERATURE – °C 2.0 5.0 10.0 20.0 50.0 150.0 3.0 30.0 100.0 500.0 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. HER, Orange, Yellow, Green Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration – HER, Orange. Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow. Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Green. Figure 9. Maximum Allowable DC Current vs. Ambient Temperature. Figure 10. Forward Current vs. Forward Voltage Characteristics. 9 Figure 11. Relative Luminous Intensity vs. DC Forward Current. Figure 12. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. Intensity Bin Limits (mcd) AlGaAs Red HDSP-F15x/F16x/G15x IV Bin Category Min. L 8.67 M 13.00 N 19.50 O 29.30 P 43.90 Color Categories Max. 15.90 23.80 35.80 53.60 80.50 HER/Orange HDSP-F20x/G20x/F40x/G40x IV Bin Category Min. Max. C 0.485 0.890 D 0.728 1.333 E 1.091 2.000 F 1.636 3.000 G 2.454 4.500 H 3.682 6.751 Yellow HDSP-F30x/G30x Min. 0.297 0.445 0.669 1.003 1.504 2.256 Max. 0.543 0.817 1.225 1.838 2.758 4.137 HDSP-F50x/G50x IV Bin Category Min. H 1.54 I 2.31 J 3.46 K 5.18 L 7.78 Max. 2.82 4.23 6.34 9.50 14.26 IV Bin Category C D E F G H Green 10 Color Yellow Green Bin 1 3 2 4 2 3 4 5 Dominant Wavelength (nm) Min. Max. 581.50 585.00 584.00 587.50 586.50 590.00 589.00 592.50 573.00 577.00 570.00 574.00 567.00 571.00 564.00 568.00 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago representatives for further clarification/information. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For further information on soldering LEDs, please refer to Application Note 1027. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-2222EN 5989-2346EN June 23, 2006