^ϰϬt THRU ^ϰϬtͲϬϲ ϭϱϬŵtWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ PRIMARY CHARACTERISTICS PD 150mW IF 1mA VRRM 40V VF SOT- PACKAGE 380mV 150℃ TJ Max FEATURES Low Forward Voltage Drop Fast Switching Moisture Sensitivity Level 1 MECHANICAL DATA Case：Molded plastic,SOT-323 Polarity：Shown above Terminals :Plated terminals, solderable per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant Maximum Ratings @Ta=25℃ Parameter Symbol Peak repetitive peak reverse voltage VRRM Working peak reverse voltage VRWM Limit Unit 40 V DC blocking voltage VR Forward continuous current IFM 200 mA Power dissipation PD 150 mW Thermal resistance junction to ambient RθJA 667 ℃/W Operating temperature TJ -55~+125 ℃ TSTG -55~+150 ℃ Storage temperature range ELECTRICAL CHARACTERISTICS (Ta=25℃ unless otherwise specified) Parameter Reverse breakdown voltage Reverse voltage leakage current Forward voltage Diode capacitance Reverse recovery time 2014.11 Symbol Test V(BR) IR= 10μA conditions Min Max 40 V = VR 30V IR 200 IF=1mA 380 IF=40mA 1000 VF = = VR 0,f 1MHz CD t rr Irr=1mA, IR=IF=10mA RL=100Ω www.willas.com.tw Unit nA mV 5 pF 5 ns Rev. J04 ^ϰϬt THRU ^ϰϬtͲϬϲ ϭϱϬŵtWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Typical Characteristics Forward 200 Characteristics Reverse 100 Characteristics (uA) (mA) 100 REVERSE CURRENT IR 1 T= a 2 5℃ T= a 1 00 ℃ 0.1 0.01 0.0 0.2 0.4 0.6 FORWARD VOLTAGE 0.1 Ta=25℃ 0.01 0 (V) 10 20 30 REVERSE VOLTAGE Ta=25℃ f=1MHz 40 (V) 150 PD 3 VR Power Derating Curve 200 POWER DISSIPATION CAPACITANCE BETWEEN TERMINALS CT (pF) VF Ta=100 ℃ 1 1E-3 1.0 Capacitance Characteristics 4 2 1 0 0 5 10 REVERSE VOLTAGE 2014.11 0.8 (mW) FORWARD CURRENT IF 10 10 15 VR 20 100 50 0 0 25 50 75 AMBIENT TEMPERATURE (V) www.willas.com.tw 100 Ta 125 (℃) Rev. J04 ^ϰϬt THRU ^ϰϬtͲϬϲ ϭϱϬŵtWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Outline Drawing .004(0.10)MIN. SOT-323 .096(2.45) .078(2.00) .054(1.35) .045(1.15) .087(2.20) .070(1.80) .010(0.25) .003(0.08) .056(1.40) .047(1.20) .016(0.40) .008(0.20) .043(1.10) .032(0.80) .004(0.10)MAX. Dimensions in inches and (millimeters) Rev.D 2014.11 www.willas.com.tw Rev. J04 ^ϰϬt THRU ^ϰϬtͲϬϲ ϭϱϬŵtWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ SOT-323 Suggested Soldering Pad Layout .028(0.70) .35(0.90) .039(1.00) .023(0.60) Dimensions in inches and (millimeters) 2014.11 www.willas.com.tw RevA Rev. J04 ϭϱϬŵtWůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ ^ϰϬt THRU ^ϰϬtͲϬϲ Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (1) Packing code, Tape & Reel Packing (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2014.11 www.willas.com.tw Rev. J04