AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Features General Description - Compatible to a Hall element - Operating voltage (VCC) : 4V to 20V - Lock shutdown and automatic restart - Speed indication output (FG) named as AP1301/4 - Rotation detection output (RD) named as AP1302/5 - Output current(AP1301/2) IO=500mA(max) - Output current(AP1304/5) IO=350mA(max) - Operating temperature (Topr) : -30ºC to +85ºC - SOP-8L/ SOP-8L EP package - Include Thermal Shutdown circuit The AP1304/5 is single phase full wave drive design, which is suited for small fans (such as CPU cooling fans). The low switching noise and effective motor drive are another advantage. All functions, including lock shutdown, automatic restart, rotation detection (RD), and speed indication output (FG) have been incorporated into one chip. When the motor is under lock condition, lock shutdown function turns off the output current. When the lock condition is removed, the IC automatically restarts and allows DC fan to run. In addition, the RD function is to detect the motor status and the FG is to provide the rotation speed. Application The AP1301/2 are heat sink version of AP1304/5. From function wise, AP1301 is the same as AP1304, and AP1302 is the same as AP1305. - CPU cooling fans Pin Descriptions Pin Assignment Name ( Top view ) IN- 1 IN+ 2 8 RD/FG 7 VCC VCC IN+ RD/FG INGND CT OUT2 OUT1 AP1301/2/4/5 CT 3 6 OUT2 OUT1 4 5 GND Description Power input Hall input Rotation detection / Speed indication Hall input Ground Timing capacitor Driver output Driver output SOP-8L Ordering Information AP130X X - X X X Function - RD output (1305) without heat sink - FG output (1304) - RD output (1302) with heat sink - FG output (1301) Wafer Body Blank or A~Z : if necessary to specify Package Lead Blank: Normal S: SOP-8L SP: SOP-8L EP L: Lead Free Packing Blank : Tube A : Taping This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 0.2 Apr. 16, 2004 1/5 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Block Diagram VCC 7 Driver1 Reg. IN+ 2 + - RD/ FG IN- Driver 2 4 OUT1 6 OUT2 3 CT 5 GND Control Logic Hall amp 8 Automatic Restart Lock Detection 1 Application Circuit D1 input C1 VCC R1 OUT1 Hall element L1 IN+ OUT2 V1 R2 AP1301/2/4/5 R6 INCT C2 Anachip Corp. www.anachip.com.tw RD(FG) RD(FG) output GND Rev 0.2 Apr.16, 2004 2/5 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Absolute Maximum Ratings (TA=25ºC) Parameter Symbol Rating Unit 20 350 500 20 V mA Maximum output withstand voltage VCC AP1304/5 AP1301/2 Vout RD/FG maximum output withstand voltage Vr/Vf 20 V RD/FG maximum output current 5 550*(note1) 1000 -30 to +85 mA mW Operating temperature Ir/If AP1304/5 AP1301/2 TOPR Storage temperature TSTG -55 to +150 ºC Input voltage Output current IOUT Allowable power dissipation PD V ºC *note1 : Reduced by 5.5mW for each increase in Ta of 1ºC over 25 ºC Electrical Characteristics ( T =25ºC, V A Parameter =5V, unless otherwise noted) CC Symbol Conditions Min. Power supply voltage Vcc Hall input voltage (DC+AC) VBH Includes the amplitude of signal Supply current ICC The output is off Charge current ICHG Discharge current Rating Typ. Max. Unit 4 -- 20 V 0.2 -- VCC-1.5 V -- 6.5 10 mA VCT = 1.5V 1.9 2.8 3.7 uA IDHG VCT = 1.5V 0.32 0.46 0.60 uA Charge/discharge ratio RCD IGHG/IDCHG 5.0 6.0 7.0 -- Output Low Level Voltage Vol Io=200mA 0.2 0.3 V Output High Level Voltage Voh Io=200mA Hall input sensitivity VHN Zero peak value (including offset and hysteresis) RD/FG pin output low VRDL, Vfgl IRD , Ifg = 5mA RD/FG output pin leakage current Truth Table INH L - IN+ L H - 3.9 CT L L H Irdl,Ifgl OUT1 H L off -- Vrd,Vfg=15V OUT2 L H off RD L L off FG L H - 4.1 V 7 15 mV 0.1 0.3 V 30 uA Mode Rotating Rotating Lockup protection activated Latch-type RD output is low during rotation and high during stop Anachip Corp. www.anachip.com.tw Rev 0.2 Apr.16, 2004 3/5 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Performance Characteristics (without heat sink AP1304/5) Ta (°C) 25 50 60 70 80 85 90 95 100 105 110 115 120 Pd (mW) 550 413 358 303 248 220 193 165 138 110 83 55 28 Power D issipation Curve Pd (m W ) 600 500 400 300 200 100 0 0 25 50 75 85 100 125 150 T a (。 C ) Note:SOP-8L package. Performance Characteristics (with heat sink AP1301/2) Ta (°C) 25 50 60 70 80 85 90 95 100 105 110 115 120 Pd (mW) 1000 800 720 640 560 520 480 440 400 360 320 280 240 P ower Dissipation Curve Pd (m W ) 1000 900 800 700 600 500 400 300 200 100 0 25 50 75 85 100 125 150 Ta (。 C) Note:SOP-8L EP package. Anachip Corp. www.anachip.com.tw Rev 0.2 Apr.16, 2004 4/5 AP1301/2/4/5 Single Coil Fan Motor Full Wave Driver Marking Information (Top View) 8 Logo 7 6 5 Blank : normal L : Lead Free Package AC AP1301/2/4/5 YY WW X X Date code X: internal code WW: Xth week,01-52 Y: Year, "01"=2001 "02"=2002 ~ Part Number 1 2 3 4 SOP-8L Package Information Package Type: SOP-8L ( Normal / Expose Pad ) H E Expose Pad Y X L VIEW "A" D 0.015x45 C B A1 e 7 (4X) A A2 7 (4X) VIEW "A" y Dimensions In Millimeters Min. Nom. Max. A 1.40 1.60 1.75 A1 0.10 0.25 A2 1.30 1.45 1.50 B 0.33 0.41 0.51 C 0.19 0.20 0.25 D 4.80 5.05 5.30 E 3.70 3.90 4.10 e 1.27 H 5.79 5.99 6.20 L 0.38 0.71 1.27 y 0.10 0O 8O θ (Expose pad) X 2.92 Y 2.34 Symbol Anachip Corp. www.anachip.com.tw Dimensions In Inches Min. Nom. Max. 0.055 0.063 0.069 0.040 0.100 0.051 0.057 0.059 0.013 0.016 0.020 0.0075 0.008 0.010 0.189 0.199 0.209 0.146 0.154 0.161 0.050 0.228 0.236 0.244 0.015 0.028 0.050 0.004 0O 8O - 0.115 0.092 - Rev 0.2 Apr.16, 2004 5/5