BZT03-Series www.vishay.com Vishay Semiconductors Zener Diodes with Surge Current Specification FEATURES • Glass passivated junction • Hermetically sealed package • Clamping time in picoseconds • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS 949539 • Medium power voltage regulators and medium power transient suppression circuits PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 6.2 to 300 V Test current IZT 2 to 100 mA VZ specification Pulse current Int. construction Single ORDERING INFORMATION (Example) DEVICE NAME ORDERING CODE TAPED UNITS BZT03C6V2 BZT03C6V2-TR 5000 per 10" tape and reel MINIMUM ORDER QUANTITY 25 000 BZT03C6V2 BZT03C6V2-TAP 5000 per ammopack 25 000 PACKAGE PACKAGE NAME SOD-57 WEIGHT MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL 369 mg UL 94 V-0 SOLDERING CONDITIONS MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE I = 10 mm, TL = 25 °C Ptot 3250 Tamb = 25 °C Ptot 1300 PZRM 10 W tp = 100 μs, Tj = 25 °C PZSM 600 W I = 10 mm, TL = constant RthJA 46 On PC board with spacing 25 mm RthJA 100 Junction temperature Tj 175 °C Storage temperature range TS - 65 to + 175 °C VF 1.2 V Power dissipation Repetitive peak reverse power dissipation Non repetitive peak surge power dissipation Junction to ambient air Forward voltage (max.) Rev. 1.7, 11-Sep-12 IF = 0.5 A UNIT mW K/W Document Number: 85599 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZT03-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE TEST CURRENT VZ at IZT1 IZT1 V mA PART NUMBER MIN. NOM. MAX. REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT CLAMPING (1) IR at VR ZZ at IZT1 TCVZ at IZT1 V(CL)R at IRMS %/K μA V MAX. V TYP. MAX. MIN. MAX. A MAX. STAND OFF (2) IR at VR μA V MAX. BZT03C6V2 5.8 6.2 6.6 100 1500 4.7 1 2 0 0.07 9.3 34 3000 5.1 BZT03C6V8 6.4 6.8 7.2 100 1000 5.1 1 2 0 0.07 10.2 31 2000 5.6 BZT03C7V5 7 7.5 7.9 100 750 5.6 1 2 0 0.07 11.3 26.5 1500 6.2 BZT03C8V2 7.7 8.2 8.7 100 600 6.2 1 2 0.03 0.08 12.3 24.4 1200 6.8 BZT03C9V1 8.5 9.1 9.6 50 20 6.8 2 4 0.03 0.08 13.3 22.7 50 7.5 BZT03C10 9.4 10 10.6 50 10 7.5 2 4 0.05 0.09 14.8 20.3 20 8.2 BZT03C11 10.4 11 11.6 50 4 8.2 4 7 0.05 0.1 15.7 19.1 5 9.1 BZT03C12 11.4 12 12.7 50 3 9.1 4 7 0.05 0.1 17 17.7 5 10 BZT03C13 12.4 13 14.1 50 2 10 5 10 0.05 0.1 18.9 15.9 5 11 BZT03C15 13.8 15 15.6 50 1 11 5 10 0.05 0.1 20.9 14.4 5 12 BZT03C16 15.3 16 17.1 25 1 12 6 15 0.06 0.11 22.9 13.1 5 13 BZT03C18 16.8 18 19.1 25 1 13 6 15 0.06 0.11 25.6 11.7 5 15 BZT03C20 18.8 20 21.2 25 1 15 6 15 0.06 0.11 28.4 10.6 5 16 BZT03C22 20.8 22 23.3 25 1 16 6 15 0.06 0.11 31 9.7 5 18 BZT03C24 22.8 24 25.6 25 1 18 7 15 0.06 0.11 33.8 8.9 5 20 BZT03C27 25.1 27 28.9 25 1 20 7 15 0.06 0.11 38.1 7.9 5 22 BZT03C30 28 30 32 25 1 22 8 15 0.06 0.11 42.2 7.1 5 24 BZT03C33 31 33 35 25 1 24 8 15 0.06 0.11 46.2 6.5 5 27 BZT03C36 34 36 38 10 1 27 21 40 0.06 0.11 50.1 6 5 30 BZT03C39 37 39 41 10 1 30 21 40 0.06 0.11 54.1 5.5 5 33 BZT03C43 40 43 46 10 1 33 24 45 0.07 0.12 60.7 4.9 5 36 BZT03C47 44 47 50 10 1 36 24 45 0.07 0.12 65.5 4.6 5 39 BZT03C51 48 51 54 10 1 39 25 60 0.07 0.12 70.8 4.2 5 43 BZT03C56 52 56 60 10 1 43 25 60 0.07 0.12 78.6 3.8 5 47 BZT03C62 58 62 66 10 1 47 25 80 0.08 0.13 86.5 3.5 5 51 BZT03C68 64 68 72 10 1 51 25 80 0.08 0.13 94.4 3.2 5 56 BZT03C75 70 75 79 10 1 56 30 100 0.08 0.13 103.5 2.9 5 62 BZT03C82 77 82 87 10 1 62 30 100 0.08 0.13 114 2.6 5 68 BZT03C91 85 91 96 5 1 68 60 200 0.09 0.13 126 2.4 5 75 BZT03C100 94 100 106 5 1 75 60 200 0.09 0.13 139 2.2 5 82 BZT03C110 104 110 116 5 1 82 80 250 0.09 0.13 152 2 5 91 BZT03C120 114 120 127 5 1 91 80 250 0.09 0.13 167 1.8 5 100 BZT03C130 124 130 141 5 1 100 110 300 0.09 0.13 185 1.6 5 110 BZT03C150 138 150 156 5 1 110 130 300 0.09 0.13 204 1.5 5 120 BZT03C160 153 160 171 5 1 120 150 350 0.09 0.13 224 1.3 5 130 BZT03C180 168 180 191 5 1 130 180 400 0.09 0.13 249 1.2 5 150 BZT03C200 188 200 212 5 1 150 200 500 0.09 0.13 276 1.1 5 160 BZT03C220 208 220 233 2 1 160 350 750 0.09 0.13 305 1 5 180 BZT03C240 228 240 256 2 1 180 400 850 0.09 0.13 336 0.9 5 200 BZT03C270 251 270 289 2 1 200 450 1000 0.09 0.13 380 0.8 5 220 BZT03C300 280 300 320 2 1 220 450 1000 0.09 0.13 419 0.72 5 240 Notes (1) 10/1000 exp. falling pulse t = 1000 μs down to 50 % p (2) Stand-off voltage = recommended suplly voltage Rev. 1.7, 11-Sep-12 Document Number: 85599 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZT03-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE TEST CURRENT VZ at IZT1 IZT1 V mA PART NUMBER MIN. NOM. MAX. REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT CLAMPING (1) IR at VR ZZ at IZT1 TCVZ at IZT1 V(CL)R at IRMS %/K μA V MAX. V TYP. MAX. MIN. MAX. A MAX. STAND OFF (2) IR at VR μA V MAX. BZT03D6V2 5.6 6.2 6.8 100 1500 4.4 1 2 0 0.07 9.5 34 3000 4.8 BZT03D6V8 6.1 6.8 7.5 100 1000 4.8 1 2 0 0.07 10.5 31 2000 5.3 BZT03D7V5 6.75 7.5 8.25 100 750 5.3 1 2 0 0.07 11.6 26.5 1500 5.9 BZT03D8V2 7.4 8.2 9 100 600 5.9 1 2 0.03 0.08 12.6 24.4 1200 6.5 BZT03D9V1 8.2 9.1 10 50 20 6.5 2 4 0.03 0.08 13.7 22.7 50 7.1 9 10 11 50 10 7.1 2 4 0.05 0.09 15.2 20.3 20 7.9 BZT03D11 9.9 11 12.1 50 4 7.9 4 7 0.05 0.1 16.2 19.1 5 8.6 BZT03D12 10.8 12 13.2 50 3 8.6 4 7 0.05 0.1 17.5 17.7 5 9.3 BZT03D13 11.7 13 14.3 50 2 9.3 5 10 0.05 0.1 19.1 15.9 5 10.6 BZT03D15 13.5 15 16.5 50 1 10.6 5 10 0.05 0.1 21.8 14.4 5 11.6 BZT03D16 14.4 16 17.6 25 1 11.6 6 15 0.06 0.11 23.4 13.1 5 12.6 BZT03D18 16.2 18 19.8 25 1 12.6 6 15 0.06 0.11 26.3 11.7 5 14.4 BZT03D20 18 20 22 25 1 14.4 6 15 0.06 0.11 29.2 10.6 5 15.8 BZT03D22 29.8 22 24.2 25 1 15.8 6 15 0.06 0.11 31.9 9.7 5 17.2 BZT03D24 21.6 24 26.4 25 1 17.2 7 15 0.06 0.11 34.6 8.9 5 19.4 BZT03D27 24.3 27 29.7 25 1 19.4 7 15 0.06 0.11 39 7.9 5 21.5 BZT03D30 27 30 33 25 1 21.5 8 15 0.06 0.11 43.5 7.1 5 23.5 BZT03D33 29.7 33 36.3 25 1 23.5 8 15 0.06 0.11 47.5 6.5 5 25.8 BZT03D36 32.4 36 39.6 10 1 25.8 21 40 0.06 0.11 51.5 6 5 28 BZT03D39 35.1 39 42.9 10 1 28 21 40 0.06 0.11 56 5.5 5 31 BZT03D43 38.7 43 47.3 10 1 31 24 45 0.07 0.12 62 4.9 5 33.5 BZT03D47 42.3 47 51.7 10 1 33.5 24 45 0.07 0.12 67.5 4.6 5 36.5 BZT03D51 45.9 51 56.1 10 1 36.5 25 60 0.07 0.12 73 4.2 5 40 BZT03D56 50.4 56 61.6 10 1 40 25 60 0.07 0.12 81 3.8 5 44.5 BZT03D62 55.8 62 68.2 10 1 44.5 25 80 0.08 0.13 89 3.5 5 49 BZT03D68 61.2 68 74.8 10 1 49 25 80 0.08 0.13 97 3.2 5 54 BZT03D75 67.5 75 82.5 10 1 54 30 100 0.08 0.13 107 2.9 5 59 BZT03D82 73.8 82 90.2 10 1 59 30 100 0.08 0.13 117 2.6 5 65 BZT03D91 81.9 91 100 5 1 65 60 200 0.09 0.13 130 2.4 5 71 BZT03D100 90 100 110 5 1 71 60 200 0.09 0.13 143 2.2 5 79 BZT03D110 99 110 121 5 1 79 80 250 0.09 0.13 157 2 5 86 BZT03D120 108 120 132 5 1 86 80 250 0.09 0.13 172 1.8 5 93 BZT03D130 117 130 143 5 1 93 110 300 0.09 0.13 187 1.6 5 106 BZT03D150 135 150 165 5 1 106 130 300 0.09 0.13 213 1.5 5 116 BZT03D160 144 160 176 5 1 116 150 350 0.09 0.13 229 1.3 5 126 BZT03D180 162 180 198 5 1 126 180 400 0.09 0.13 256 1.2 5 144 BZT03D200 180 200 220 5 1 144 200 500 0.09 0.13 284 1.1 5 158 BZT03D220 198 220 242 2 1 158 350 750 0.09 0.13 314 1 5 172 BZT03D240 216 240 264 2 1 172 400 850 0.09 0.13 364 0.9 5 194 BZT03D270 243 270 297 2 1 194 450 1000 0.09 0.13 388 0.8 5 215 BZT03D10 Notes (1) 10/1000 exp. falling pulse t = 1000 μs down to 50 % p (2) Stand-off voltage = recommended suplly voltage Rev. 1.7, 11-Sep-12 Document Number: 85599 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BZT03-Series www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 3.0 3 25 I F– Forward Current (A ) 50 50 2.5 2.0 Tj =25°C 1.5 1.0 0.5 0 2 7 0 94 9086a PZSM – Non-Repetitive Surge Power Dissipation (W ) Ptot –Total Power Dissipation ( W ) l l=10mm 3 15mm TL=constant 2 20mm 1 see Fig.1 40 80 120 160 Tj =25°C 1000 100 10 0.01 200 Tamb – Ambient Temperature ( °C ) 94 9584 2.0 10000 0 0 1.5 Fig. 3 - Forward Current vs. Forward Voltage Fig. 1 - Epoxy Glass Hard Tissue, Board Thickness 1.5 mm, RthJA 100 K/W l 1.0 V F – Forward Voltage ( V ) 94 9585 4 0.5 94 9586 Fig. 2 - Total Power Dissipation vs. Ambient Temperature 0.1 1 10 100 tp – Pulse Length ( ms ) Fig. 4 - Non Repetitive Surge Power Dissipation vs. Pulse Length 3.6 (0.142) max. 0.82 (0.032) max. PACKAGE DIMENSIONS in millimeters (inches): SOD-57 26 (1.024) min. 4 (0.157) max. 26 (1.024) min. 20543 Rev. 1.7, 11-Sep-12 Document Number: 85599 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000