MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com ICTE5.0 to ICTE15C MPTE-5 to MPTE-45 1N6373 to 1N6381 and 1N6382 to 1N6389 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V 1500 Watt Peak Power FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in Molded Plastic package • 1500W surge capability at 1ms • Excellent clamping capability • Low zener inpedance • Fast response time: typically less than 1.0 ps from 0 volts to BV min. • Typical IR less than 1µA above 10V • High temperature soldering guaranteed: 250°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension • Includes 1N6373 thru 1N6385 MECHANICAL DATA Case: JEDEC DO-201 Molded plastic Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.045 ounces, 1.2 grams MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms (NOTE 1) Peak Pulse Current of on 10/1000 µs waveform (Note 1) Steady State Power Dissipation at T L = 75°C Lead lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note 3) Maximum instantaneous forward voltage at 100A for unidirectional only Operatings and Storage Temperature Range SYMBOL VALUE UNITS PPPM Minimum 1500 Watts IPPM SEE TABLE 1 Amps PM (AV) 5.0 Watts IFSM 200 Amps VF 3.5 Volt TJ, TSTG -55 +175 °C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com ICTE5.0 to ICTE15C MPTE-5 to MPTE-45 1N6373 to 1N6381 and 1N6382 to 1N6389 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR STANDOFF VOLTAGE- 5.0 to 45.0V 1500 Watt Peak Power Part Numbers MINIMUM REVERSE MINIMUM MAXIMUM CLAMPING STANDOFF BREAKDOWN REVERSE VOLTAGE VOLTAGE VOLTAGE LEAKAGE (Vc) @ (VRWM) VBR @ 1mA IR @ Vr Ipp=1A (V) (Volts) (µA) (Volts) MAXIMUM CLAMPING VOLTAGE (Vc) @ Ipp=1A (Volts) MAXIMUM PEAK PULSE CURRENT Ipp (A) ICTE-5* ICTE-8 ICTE-10 ICTE-12 ICTE-15 ICTE-18 ICTE-22 ICTE-36 ICTE-45 1N6373 1N6374 1N6375 1N6376 1N6377 1N6378 1N6379 1N6380 1N6381 MPTE-5* MPTE-8 MPTE-10 MPTE-12 MPTE-15 MPTE-18 MPTE-22 MPTE-36 MPTE-45 5* 8.0 10.0 12.0 15.0 18.0 22.0 36.0 45.0 6.0 9.4 11.7 14.1 17.6 21.2 25.9 42.4 52.9 300.0 25.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 7.1 11.3 13.7 16.1 20.1 24.2 29.8 50.6 63.3 7.5 11.5 14.1 16.5 20.6 25.2 32.0 54.3 70.0 160.0 100.0 90.0 70.0 60.0 50.0 40.0 23.0 19.0 ICTE-8C ICTE-10C ICTE-12C ICTE-15C ICTE-18C ICTE-22C ICTE-36C ICTE-45C 1N6382 1N6383 1N6384 1N6385 1N6386 1N6387 1N6388 1N6389 MPTE-8C MPTE-10C MPTE-12C MPTE-15C MPTE-18C MPTE-22C MPTE-36C MPTE-45C 8.0 10.0 12.0 15.0 18.0 22.0 36.0 45.0 9.4 11.7 14.1 17.6 21.2 25.9 42.4 52.9 50 2.0 2.0 2.0 2.0 2.0 2.0 2.0 11.4 14.1 16.7 20.8 24.8 30.8 50.6 63.3 11.6 14.5 17.1 21.4 25.5 32.0 54.3 70.0 100.0 90.0 70.0 60.0 50.0 40.0 23.0 19.0 *ICTE-5 is not available in Bi-directional. Certified RoHS Compliant UL File # E223026 Suffix 'C' denotes Bi-directional device.