BOARDCOM BCM5434 4-port gigabit copper transceiver Datasheet

BCM5434
PRODUCT
Brief
®
4-PORT GIGABIT COPPER TRANSCEIVER WITH SGMII & SERDES MAC INTERFACE
B C M 5 4 3 4
S U M M A R Y
F E AT U R E S
O F
B E N E F I T S
Four fully integrated 10BASE-T/100BASE-TX/
• 1000BASE-T
Gigabit Ethernet transceivers
SGMII
and
SerDes
MAC Interface options
•
Fully compliant with IEEE 802.3, 802.3u, and 802.3ab
• standards
• 0.13 um CMOS — low power and cost
• Low power
Low power quad-port integration enables single-row,
• high
port density switches.
• Low EMI emissions
logic automatically selects the
• Ethernet@WireSpeed
maximum speed based on channel conditions
• Cable plant diagnostic
• Requires no airflow or heatsink.
Reduces design constraints in high-density
• applications
that have higher EMI emissions.
Automatically
the link to support the
• highest possibleconfigures
speed based on link partner capability
• 1W per port
• Advanced power management
TM
• Cable plant analyzer function detects cable plant impairments
• Link quality indication LED
• Automatic detection and correction of wiring pair swaps, pair
skew, and pair polarity
Automatic
MDI/MDIX crossover at all speeds
•
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• Lowers system costs by eliminating PCB layers required for
routing high density solutions
• SGMII interface reduces I/O pin requirement over RGMII by
more than 50%.
• Lowers MAC/switch costs by reducing the number of pins
required to interface to the PHY.
Provides compatibility with IEEE standard devices
• operating
at 10, 100, and 1000 Mbps at half- and fullduplex.
and characteristics of the channel.
Cable diagnostic function characterizes cable plant
• condition
and immediately indicates cabling issues.
• Prevents erroneous equipment return due to bad cable plants.
• Prevents manufacturing fall-out due to bad cable plants.
High CESD tolerance prevents equipment damage and
• return.
Operates with larger packets for wider range of packet
• protocol
support and improved efficiency.
Ease of manufacturing with JTAG support, simplified
• power
supply, and multiple MAC interfaces.
BCM5434
BCM5434
10/100/1000BASE-T
Gigabit Ethernet Transceiver
2x8 RJ-45s
BCM5434
Ethernet Switch
10/100/1000 Mbps
BCM5434
with integrated magnetics
BCM5434 System Diagram
Similar pages