Skyworks AS165-59LF Gaas ic high-isolation spst switch positive control 0.7-2.5 ghz Datasheet

DATA SHEET
AS165-59, AS165-59LF: GaAs IC High-Isolation
SPST Switch Positive Control 0.7–2.5 GHz
Features
Pin Out
Single positive control voltage (0, 5 V)
● Base station synthesizer switch
● High isolation (45 dB @ 0.9, 1.9 GHz)
● J port nonreflective
1
● Miniature low-cost MSOP-8 plastic package
● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
●
VS
2
8
1
CBL
V1
5
4
GND
GND
6
50
CBL
7
3
J1
GND
GND
J2
DC blocking capacitors must be supplied externally.
CBL = 47 pF for operation >500 MHz.
Description
The AS165-59 SPST IC FET switch is absorptive on the input. The
switch features high isolation and low insertion loss. Ideal
building block for base station applications where synthesizer
isolation is critical. Use in conjunction with the AS164-80 SPDT
switch to meet GSM synthesizer switch isolation requirements.
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Electrical Specifications at 25 °C (0, 5 V)
Parameter(1)
Insertion
loss(2)
Frequency
Min.
0.7–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
Isolation
0.7–2.0 GHz
2.0–2.5 GHz
VSWR(3)
0.7–1.8 GHz
1.8–2.5 GHz
39
30
Typ.
Max.
Unit
0.7
0.8
1.2
0.9
1.1
1.4
dB
dB
dB
45
38
1.7:1
1.5:1
dB
dB
1.9:1
1.8:1
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Insertion loss changes by 0.003 dB/°C.
3. Insertion loss state and J1 port.
BUY
NOW
Innovation to GoTM
Now available for purchase online.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200172 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 16, 2005
1
DATA SHEET • AS165-59, AS165-59LF
Operating Characteristics at 25 °C (0, 5 V)
Parameter
Condition
Switching characteristics
Rise, fall
On, off
Video feedthru
Frequency
Min.
Typ.
10/90% or 90/10% RF
50% CTL to 90/10% RF
TRISE = 1 ns, BW = 500 MHz
Input power for 1 dB compression
0.7–2.5 GHz
Intermodulation intercept point (IP3)
For two-tone input power 5 dBm
0.7–2.5 GHz
Thermal resistance
Control voltages
Max.
Unit
25
150
50
ns
ns
mV
28
dBm
45
dBm
25
°C/W
VLOW = 0 to 0.2 V @ 20 µA max.
VHIGH = 5 V @ 50 µA max. to 7 V @ 200 µA max.
VS = VHIGH ± 0.2 V
Typical Performance Data (0, 5 V)
0
-20
-25
J1–J2
Isolation (dB)
Insertion Loss (dB)
-0.5
-1.0
-1.5
-30
-35
J1–J2
-40
-45
-50
-55
-2.0
-60
-65
-2.5
-70
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Isolation vs. Frequency
2.50
2.25
VSWR
2.00
1.75
Isolation
1.50
Ins. Loss
1.25
1.00
0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
VSWR vs. Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
December 16, 2005 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200172 Rev. C
3.0
DATA SHEET • AS165-59, AS165-59LF
Truth Table
Absolute Maximum Ratings
V1
J1–J2
0
Insertion loss
VHIGH
Isolation
Characteristic
RF input power
VHIGH = 5 to 7 V (VS = VHIGH ± 0.2 V).
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
MSOP-8
0.0256 (0.65 mm) Typ.
0.118 (3.00 mm)
± 0.004 (0.1 mm)
SQ.
Pin 1
0.038 (0.95 mm)
0.030 (0.75 mm)
0.012 (0.30 mm)
7.0˚
Typ.
0.017
(0.43 mm)
Supply voltage
8V
Control voltage
-0.2 V, +8 V
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
0.193 (4.90 mm)
Ref.
+ 0.006 (0.15 mm)
- 0.002 (0.05 mm)
0.007 (0.18 mm)
± 0.005 (0.12 mm)
0.006 (0.15 mm)
0.002 (0.05 mm)
2 W max. > 500 MHz,
0/8 V control
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
Tape and Reel Information
Pin 1
Indicator
Value
8.0˚
Max.
0.028 (0.70 mm)
0.016 (0.40 mm)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200172 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 16, 2005
3
DATA SHEET • AS165-59, AS165-59LF
Copyright © 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, “Breakthrough Simplicity” and “Innovation to Go” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Thirdparty brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at
www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
December 16, 2005 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200172 Rev. C
Similar pages