GS1A THRU GS1M 1.0AMP.GLASS PASSIVATED SURFACE MOUNT RECTIFIERS SMA（DO-214AC） FEATURE .High current capability .Low forward voltage drop .Low power loss, high efficiency .High surge capability .High temperature soldering guaranteed: 260℃/10 seconds at terminals. .For surface mounted application. .Easy pick and place. Fig1: SMA/DO-214AC* FOR OPEN JUNCTION DICE PACKAGING OUTLINE MECHANICAL DATA Fig2: SMA/DO-214AC FOR GLASS PASSIVATED DICE PACKAGING OUTLINE .Case: Molded plastic .Epoxy: UL94V-0 rate flame retardant .Lead: MIL-STD- 202E, Method 208 guaranteed .Polarity:Color band denotes cathode end .Packaging:12mm tape per EIA STD RS-481 .Mounting position: Any NO A B C D E F G Fig1（mm） 1.9～2.4 1.2～1.8 0.23MAX 2.4～2.9 3.8～4.6 0.8～1.8 4.8～5.8 Fig2（mm） 1.98～2.3 1.35～1.6 0.2MAX 2.4～2.9 3.8～4.6 0.8～1.8 4.8～5.8 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20% Type Number SYMBOL GS1A GS1B GS1D GS1G GS1J GS1K GS1M units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current IF(AV) 1.0 A IFSM 30.0 A Maximum Forward Voltage at 1.0A DC VF 1.0 V Maximum Forward Voltage at 3.0A DC VF 1.3 V at TA=55°C Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load (JEDEC method) Maximum DC Reverse Current at rated DC blocking voltage @TA =25°C @TA =125°C 5.0 IR 100.0 µA Typical Junction Capacitance (Note1) CJ 15 pF Typical Thermal Resistance (Note 2) R(JA) 75 °C /W Storage Temperature TSTG -55 to +150 °C TJ -55 to +150 °C Operation Junction Temperature Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 2. Measured on P.C. Board with 0.2×0.2”(5.0×5.0mm)Copper Pad Areas. - 369 -