TDK MHQ0603P3N5CT000 Inductors for high frequency circuits multilayer ceramic Datasheet

I
N
D
U
C
T
O
R
S
January 2015
Inductors for High Frequency Circuits
Multilayer Ceramic
MHQ-P Series
MHQ0603P Type
MHQ0603P
0603 [0201 inch]*
* Dimensions Code JIS[EIA]
(2/16)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(3/16)
I
N
D
U
C
T
O
R
S
Inductors for High Frequency Circuits
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Multilayer Ceramic
Overview of MHQ0603P Type
FEATURES
Unique ceramic material and configuration allows for the realization of high Q characteristics that are equivalent to that of air core wound
inductors.
Multilayer method allows for a lineup with fine increments of inductance.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MHQ
Series name
0603
P
L×W×H Dimensions
(mm)
0603 0.65×0.35×0.35
Characteristics
P
0N6
B
Inductance
(nH)
0N6
0.6
1N1
1.1
11N
11
Inductance
tolerance
B
±0.1nH
C
±0.2nH
S
±0.3nH
H
±3%
J
±5%
T
000
Packaging style
Internal code
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Type
MHQ0603P
Operating
temperature
（°C）
–55 to +125
Package quantity
Individual weight
(pieces/reel)
15000
（mg）
0.2
Storage
temperature
（°C）
–55 to +125
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(4/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(5/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
0.35±0.05
SHAPE & DIMENSIONS
0.09±0.04
0.09±0.04
0.35±0.05
0.65±0.05
0.15±0.05
0.15±0.05
Dimensions in mm
0.30
RECOMMENDED LAND PATTERN
0.25
0.30
0.25
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(6/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
・
Tolerance
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
L measuring
frequency
Q
Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
min.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
(: )max.
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.15
0.15
0.15
(mA)max.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
700
700
700
700
700
700
700
700
700
700
700
700
MHQ0603P0N6BT000
MHQ0603P0N6CT000
MHQ0603P0N7BT000
MHQ0603P0N7CT000
MHQ0603P0N8BT000
MHQ0603P0N8CT000
MHQ0603P0N9BT000
MHQ0603P0N9CT000
MHQ0603P1N0BT000
MHQ0603P1N0CT000
MHQ0603P1N0ST000
MHQ0603P1N1BT000
MHQ0603P1N1CT000
MHQ0603P1N1ST000
MHQ0603P1N2BT000
MHQ0603P1N2CT000
MHQ0603P1N2ST000
MHQ0603P1N3BT000
MHQ0603P1N3CT000
MHQ0603P1N3ST000
MHQ0603P1N4BT000
MHQ0603P1N4CT000
MHQ0603P1N4ST000
MHQ0603P1N5BT000
MHQ0603P1N5CT000
MHQ0603P1N5ST000
MHQ0603P1N6BT000
MHQ0603P1N6CT000
MHQ0603P1N6ST000
MHQ0603P1N7BT000
MHQ0603P1N7CT000
MHQ0603P1N7ST000
MHQ0603P1N8BT000
MHQ0603P1N8CT000
MHQ0603P1N8ST000
MHQ0603P1N9BT000
MHQ0603P1N9CT000
MHQ0603P1N9ST000
MHQ0603P2N0BT000
MHQ0603P2N0CT000
MHQ0603P2N0ST000
MHQ0603P2N1BT000
MHQ0603P2N1CT000
MHQ0603P2N1ST000
(GHz)typ.
20.0
20.0
20.0
20.0
20.0
20.0
18.8
18.8
19.3
19.3
19.3
19.3
19.3
19.3
20.0
20.0
20.0
20.0
20.0
20.0
18.6
18.6
18.6
19.5
19.5
19.5
17.5
17.5
17.5
16.7
16.7
16.7
15.8
15.8
15.8
16.1
16.1
16.1
13.8
13.8
13.8
12.7
12.7
12.7
(: )typ.
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.02
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.06
0.06
0.06
0.06
0.06
0.06
0.05
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
0.08
Short bar residual inductance =0.48nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4991A+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(7/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
・
Tolerance
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
L measuring
frequency
Q
Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
min.
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
10.0
10.0
10.0
10.0
10.0
10.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
7.0
7.0
7.0
7.0
7.0
7.0
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
(: )max.
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.20
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
(mA)max.
700
700
700
700
700
700
700
700
700
500
500
500
500
500
500
500
500
500
500
500
500
450
450
450
450
450
450
450
450
450
550
550
550
500
500
500
500
500
500
500
500
500
500
500
500
MHQ0603P2N2BT000
MHQ0603P2N2CT000
MHQ0603P2N2ST000
MHQ0603P2N3BT000
MHQ0603P2N3CT000
MHQ0603P2N3ST000
MHQ0603P2N4BT000
MHQ0603P2N4CT000
MHQ0603P2N4ST000
MHQ0603P2N5BT000
MHQ0603P2N5CT000
MHQ0603P2N5ST000
MHQ0603P2N6BT000
MHQ0603P2N6CT000
MHQ0603P2N6ST000
MHQ0603P2N7BT000
MHQ0603P2N7CT000
MHQ0603P2N7ST000
MHQ0603P2N8BT000
MHQ0603P2N8CT000
MHQ0603P2N8ST000
MHQ0603P2N9BT000
MHQ0603P2N9CT000
MHQ0603P2N9ST000
MHQ0603P3N0BT000
MHQ0603P3N0CT000
MHQ0603P3N0ST000
MHQ0603P3N1BT000
MHQ0603P3N1CT000
MHQ0603P3N1ST000
MHQ0603P3N2BT000
MHQ0603P3N2CT000
MHQ0603P3N2ST000
MHQ0603P3N3BT000
MHQ0603P3N3CT000
MHQ0603P3N3ST000
MHQ0603P3N4BT000
MHQ0603P3N4CT000
MHQ0603P3N4ST000
MHQ0603P3N5BT000
MHQ0603P3N5CT000
MHQ0603P3N5ST000
MHQ0603P3N6BT000
MHQ0603P3N6CT000
MHQ0603P3N6ST000
(GHz)typ.
13.2
13.2
13.2
12.5
12.5
12.5
11.7
11.7
11.7
11.1
11.1
11.1
11.1
11.1
11.1
10.5
10.5
10.5
10.6
10.6
10.6
10.8
10.8
10.8
10.3
10.3
10.3
10.5
10.5
10.5
9.5
9.5
9.5
9.6
9.6
9.6
9.3
9.3
9.3
9.5
9.5
9.5
9.1
9.1
9.1
(: )typ.
0.09
0.09
0.09
0.08
0.08
0.08
0.08
0.08
0.08
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.18
0.18
0.18
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.19
0.13
0.13
0.13
0.15
0.15
0.15
0.14
0.14
0.14
0.17
0.17
0.17
0.16
0.16
0.16
Short bar residual inductance =0.48nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4991A+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(8/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10
10
11
11
・
Tolerance
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.2nH
±0.3nH
±3%
±0.2nH
±0.3nH
±3%
±0.2nH
±0.3nH
±3%
±0.2nH
±0.3nH
±3%
±0.3nH
±3%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
L measuring
frequency
Q
Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
min.
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
5.5
5.5
5.5
5.5
5.5
5.5
5.0
5.0
5.0
4.0
4.0
4.0
4.0
3.8
3.8
3.8
3.8
3.8
3.8
3.5
3.5
3.2
3.2
(: )max.
0.25
0.25
0.25
0.30
0.30
0.30
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.70
0.70
0.70
0.70
0.50
0.50
0.90
0.90
0.90
0.90
1.20
1.20
1.30
1.30
(mA)max.
450
450
450
450
450
450
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
350
350
350
350
350
350
350
350
350
300
300
300
300
300
300
250
250
250
250
240
240
240
240
MHQ0603P3N7BT000
MHQ0603P3N7CT000
MHQ0603P3N7ST000
MHQ0603P3N8BT000
MHQ0603P3N8CT000
MHQ0603P3N8ST000
MHQ0603P3N9BT000
MHQ0603P3N9CT000
MHQ0603P3N9ST000
MHQ0603P4N0BT000
MHQ0603P4N0CT000
MHQ0603P4N0ST000
MHQ0603P4N1BT000
MHQ0603P4N1CT000
MHQ0603P4N1ST000
MHQ0603P4N2BT000
MHQ0603P4N2CT000
MHQ0603P4N2ST000
MHQ0603P4N3CT000
MHQ0603P4N3ST000
MHQ0603P4N3HT000
MHQ0603P4N7CT000
MHQ0603P4N7ST000
MHQ0603P4N7HT000
MHQ0603P5N1CT000
MHQ0603P5N1ST000
MHQ0603P5N1HT000
MHQ0603P5N6CT000
MHQ0603P5N6ST000
MHQ0603P5N6HT000
MHQ0603P6N2ST000
MHQ0603P6N2HT000
MHQ0603P6N8HT000
MHQ0603P6N8JT000
MHQ0603P7N5HT000
MHQ0603P7N5JT000
MHQ0603P8N2HT000
MHQ0603P8N2JT000
MHQ0603P9N1HT000
MHQ0603P9N1JT000
MHQ0603P10NHT000
MHQ0603P10NJT000
MHQ0603P11NHT000
MHQ0603P11NJT000
(GHz)typ.
9.1
9.1
9.1
9.1
9.1
9.1
9.2
9.2
9.2
8.5
8.5
8.5
8.3
8.3
8.3
8.2
8.2
8.2
8.2
8.2
8.2
7.9
7.9
7.9
7.8
7.8
7.8
7.1
7.1
7.1
6.7
6.7
6.8
6.8
5.7
5.7
5.4
5.4
5.5
5.5
5.2
5.2
4.6
4.6
(: )typ.
0.17
0.17
0.17
0.19
0.19
0.19
0.23
0.23
0.23
0.26
0.26
0.26
0.22
0.22
0.22
0.23
0.23
0.23
0.23
0.23
0.23
0.25
0.25
0.25
0.24
0.24
0.24
0.29
0.29
0.29
0.52
0.52
0.53
0.53
0.37
0.37
0.64
0.64
0.62
0.62
0.86
0.86
0.89
0.89
Short bar residual inductance =0.48nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4991A+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(9/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
12
12
13
13
15
15
16
16
18
18
20
20
22
22
24
24
27
27
30
30
33
33
36
36
39
39
・
Tolerance
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
L measuring
frequency
Q
Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
min.
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
14
14
14
14
14
14
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
(GHz)min.
3.2
3.2
3.2
3.2
2.8
2.8
2.5
2.5
2.4
2.4
2.4
2.4
2.2
2.2
2.1
2.1
2.0
2.0
1.9
1.9
1.8
1.8
1.7
1.7
1.6
1.6
(: )max.
1.40
1.40
1.50
1.50
1.50
1.50
1.70
1.70
1.70
1.70
2.00
2.00
2.00
2.00
2.20
2.20
2.20
2.20
2.70
2.70
2.80
2.80
2.80
2.80
3.00
3.00
(mA)max.
240
240
180
180
180
180
180
180
180
180
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
160
MHQ0603P12NHT000
MHQ0603P12NJT000
MHQ0603P13NHT000
MHQ0603P13NJT000
MHQ0603P15NHT000
MHQ0603P15NJT000
MHQ0603P16NHT000
MHQ0603P16NJT000
MHQ0603P18NHT000
MHQ0603P18NJT000
MHQ0603P20NHT000
MHQ0603P20NJT000
MHQ0603P22NHT000
MHQ0603P22NJT000
MHQ0603P24NHT000
MHQ0603P24NJT000
MHQ0603P27NHT000
MHQ0603P27NJT000
MHQ0603P30NHT000
MHQ0603P30NJT000
MHQ0603P33NHT000
MHQ0603P33NJT000
MHQ0603P36NHT000
MHQ0603P36NJT000
MHQ0603P39NHT000
MHQ0603P39NJT000
(GHz)typ.
4.6
4.6
4.5
4.5
4.2
4.2
4.0
4.0
3.7
3.7
3.5
3.5
3.3
3.3
3.1
3.1
2.9
2.9
2.7
2.7
2.5
2.5
2.4
2.4
2.3
2.3
(: )typ.
0.77
0.77
1.01
1.01
1.05
1.05
1.21
1.21
1.21
1.21
1.38
1.38
1.40
1.40
1.55
1.55
1.55
1.55
1.98
1.98
2.06
2.06
2.08
2.08
2.24
2.24
Short bar residual inductance =0.48nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4991A+16197A
Self-resonant frequency
8720C
DC resistance
Type-7561
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Yokogawa
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(10/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
Q typ.
800MHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
1.8GHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.0GHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.4GHz
0.6
0.6
0.7
0.7
0.8
0.8
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.2
2.2
2.2
500MHz
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29min.
29
29
29
28
28
28
30
30
30
29
29
29
28
28
28
27
27
27
29
29
29
Part No.
800MHz
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38min.
38
38
38
37
37
37
39
39
39
38
38
38
38
38
38
35
35
35
37
37
37
1.8GHz
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58min.
58
58
58
56
56
56
62
62
62
59
59
59
57
57
57
55
55
55
58
58
58
2.0GHz
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60min.
60
60
60
60
60
60
65
65
65
62
62
62
60
60
60
58
58
58
62
62
62
2.4GHz
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66min.
66
66
66
66
66
66
71
71
71
69
69
69
66
66
66
64
64
64
68
68
68
MHQ0603P0N6BT000
MHQ0603P0N6CT000
MHQ0603P0N7BT000
MHQ0603P0N7CT000
MHQ0603P0N8BT000
MHQ0603P0N8CT000
MHQ0603P0N9BT000
MHQ0603P0N9CT000
MHQ0603P1N0BT000
MHQ0603P1N0CT000
MHQ0603P1N0ST000
MHQ0603P1N1BT000
MHQ0603P1N1CT000
MHQ0603P1N1ST000
MHQ0603P1N2BT000
MHQ0603P1N2CT000
MHQ0603P1N2ST000
MHQ0603P1N3BT000
MHQ0603P1N3CT000
MHQ0603P1N3ST000
MHQ0603P1N4BT000
MHQ0603P1N4CT000
MHQ0603P1N4ST000
MHQ0603P1N5BT000
MHQ0603P1N5CT000
MHQ0603P1N5ST000
MHQ0603P1N6BT000
MHQ0603P1N6CT000
MHQ0603P1N6ST000
MHQ0603P1N7BT000
MHQ0603P1N7CT000
MHQ0603P1N7ST000
MHQ0603P1N8BT000
MHQ0603P1N8CT000
MHQ0603P1N8ST000
MHQ0603P1N9BT000
MHQ0603P1N9CT000
MHQ0603P1N9ST000
MHQ0603P2N0BT000
MHQ0603P2N0CT000
MHQ0603P2N0ST000
MHQ0603P2N1BT000
MHQ0603P2N1CT000
MHQ0603P2N1ST000
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(11/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
Q typ.
800MHz
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
1.8GHz
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
2.0GHz
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
2.4GHz
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
500MHz
28
28
28
31
31
31
31
31
31
25
25
25
26
26
26
26
26
26
26
26
26
24
24
24
23
23
23
24
24
24
27
27
27
25
25
25
27
27
27
25
25
25
26
26
26
Part No.
800MHz
37
37
37
40
40
40
41
41
41
32
32
32
34
34
34
34
34
34
35
35
35
31
31
31
30
30
30
32
32
32
35
35
35
32
32
32
35
35
35
33
33
33
33
33
33
1.8GHz
57
57
57
61
61
61
62
62
62
51
51
51
54
54
54
54
54
54
54
54
54
48
48
48
46
46
46
49
49
49
53
53
53
48
48
48
53
53
53
50
50
50
50
50
50
2.0GHz
61
61
61
64
64
64
64
64
64
53
53
53
56
56
56
57
57
57
55
55
55
51
51
51
48
48
48
51
51
51
55
55
55
50
50
50
55
55
55
52
52
52
52
52
52
2.4GHz
68
68
68
71
71
71
71
71
71
59
59
59
62
62
62
63
63
63
62
62
62
56
56
56
52
52
52
57
57
57
61
61
61
54
54
54
61
61
61
57
57
57
57
57
57
MHQ0603P2N2BT000
MHQ0603P2N2CT000
MHQ0603P2N2ST000
MHQ0603P2N3BT000
MHQ0603P2N3CT000
MHQ0603P2N3ST000
MHQ0603P2N4BT000
MHQ0603P2N4CT000
MHQ0603P2N4ST000
MHQ0603P2N5BT000
MHQ0603P2N5CT000
MHQ0603P2N5ST000
MHQ0603P2N6BT000
MHQ0603P2N6CT000
MHQ0603P2N6ST000
MHQ0603P2N7BT000
MHQ0603P2N7CT000
MHQ0603P2N7ST000
MHQ0603P2N8BT000
MHQ0603P2N8CT000
MHQ0603P2N8ST000
MHQ0603P2N9BT000
MHQ0603P2N9CT000
MHQ0603P2N9ST000
MHQ0603P3N0BT000
MHQ0603P3N0CT000
MHQ0603P3N0ST000
MHQ0603P3N1BT000
MHQ0603P3N1CT000
MHQ0603P3N1ST000
MHQ0603P3N2BT000
MHQ0603P3N2CT000
MHQ0603P3N2ST000
MHQ0603P3N3BT000
MHQ0603P3N3CT000
MHQ0603P3N3ST000
MHQ0603P3N4BT000
MHQ0603P3N4CT000
MHQ0603P3N4ST000
MHQ0603P3N5BT000
MHQ0603P3N5CT000
MHQ0603P3N5ST000
MHQ0603P3N6BT000
MHQ0603P3N6CT000
MHQ0603P3N6ST000
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(12/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10.0
10.0
11.0
11.0
Q typ.
800MHz
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
6.8
6.8
7.5
7.5
8.2
8.2
9.2
9.2
10.0
10.0
11.0
11.0
1.8GHz
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.4
4.4
4.4
4.9
4.9
4.9
5.3
5.3
5.3
5.9
5.9
5.9
6.6
6.6
7.2
7.2
8.1
8.1
8.9
8.9
9.9
9.9
11.0
11.0
12.0
12.0
2.0GHz
3.8
3.8
3.8
3.9
3.9
3.9
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.4
4.4
4.4
4.5
4.5
4.5
4.9
4.9
4.9
5.4
5.4
5.4
6.0
6.0
6.0
6.7
6.7
7.4
7.4
8.3
8.3
9.2
9.2
10.2
10.2
11.0
11.0
13.0
13.0
2.4GHz
3.9
3.9
3.9
4.0
4.0
4.0
4.2
4.2
4.2
4.3
4.3
4.3
4.4
4.4
4.4
4.5
4.5
4.5
4.6
4.6
4.6
5.1
5.1
5.1
5.5
5.5
5.5
6.2
6.2
6.2
7.0
7.0
7.7
7.7
8.8
8.8
9.7
9.7
10.9
10.9
12.0
12.0
14.0
14.0
500MHz
26
26
26
24
24
24
23
23
23
26
26
26
23
23
23
24
24
24
25
25
25
24
24
24
25
25
25
24
24
24
21
21
22
22
24
24
21
21
23
23
22
22
21
21
Part No.
800MHz
34
34
34
32
32
32
30
30
30
34
34
34
30
30
30
31
31
31
33
33
33
31
31
31
32
32
32
31
31
31
28
28
28
28
30
30
27
27
29
29
28
28
27
27
1.8GHz
51
51
51
49
49
49
47
47
47
52
52
52
46
46
46
46
46
46
49
49
49
47
47
47
49
49
49
46
46
46
42
42
43
43
44
44
39
39
42
42
41
41
37
37
2.0GHz
52
52
52
51
51
51
49
49
49
53
53
53
48
48
48
48
48
48
51
51
51
49
49
49
51
51
51
48
48
48
43
43
44
44
45
45
40
40
44
44
42
42
38
38
2.4GHz
58
58
58
56
56
56
54
54
54
59
59
59
52
52
52
52
52
52
56
56
56
54
54
54
56
56
56
52
52
52
47
47
48
48
48
48
42
42
46
46
43
43
39
39
MHQ0603P3N7BT000
MHQ0603P3N7CT000
MHQ0603P3N7ST000
MHQ0603P3N8BT000
MHQ0603P3N8CT000
MHQ0603P3N8ST000
MHQ0603P3N9BT000
MHQ0603P3N9CT000
MHQ0603P3N9ST000
MHQ0603P4N0BT000
MHQ0603P4N0CT000
MHQ0603P4N0ST000
MHQ0603P4N1BT000
MHQ0603P4N1CT000
MHQ0603P4N1ST000
MHQ0603P4N2BT000
MHQ0603P4N2CT000
MHQ0603P4N2ST000
MHQ0603P4N3CT000
MHQ0603P4N3ST000
MHQ0603P4N3HT000
MHQ0603P4N7CT000
MHQ0603P4N7ST000
MHQ0603P4N7HT000
MHQ0603P5N1CT000
MHQ0603P5N1ST000
MHQ0603P5N1HT000
MHQ0603P5N6CT000
MHQ0603P5N6ST000
MHQ0603P5N6HT000
MHQ0603P6N2ST000
MHQ0603P6N2HT000
MHQ0603P6N8HT000
MHQ0603P6N8JT000
MHQ0603P7N5HT000
MHQ0603P7N5JT000
MHQ0603P8N2HT000
MHQ0603P8N2JT000
MHQ0603P9N1HT000
MHQ0603P9N1JT000
MHQ0603P10NHT000
MHQ0603P10NJT000
MHQ0603P11NHT000
MHQ0603P11NJT000
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(13/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
12.0
12.0
13.0
13.0
15.0
15.0
16.0
16.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
24.0
27.0
27.0
30.0
30.0
33.0
33.0
36.0
36.0
39.0
39.0
Q typ.
800MHz
12.0
12.0
13.0
13.0
15.0
15.0
16.0
16.0
18.0
18.0
21.0
21.0
23.0
23.0
25.0
25.0
28.0
28.0
32.0
32.0
35.0
35.0
38.0
38.0
42.0
42.0
1.8GHz
14.0
14.0
15.0
15.0
18.0
18.0
19.0
19.0
22.0
22.0
26.0
26.0
29.0
29.0
34.0
34.0
38.0
38.0
47.0
47.0
55.0
55.0
67.0
67.0
79.0
79.0
2.0GHz
14.0
14.0
16.0
16.0
19.0
19.0
20.0
20.0
24.0
24.0
28.0
28.0
32.0
32.0
38.0
38.0
44.0
44.0
—
—
—
—
—
—
—
—
2.4GHz
16.0
16.0
18.0
18.0
21.0
21.0
23.0
23.0
28.0
28.0
34.0
34.0
40.0
40.0
—
—
—
—
—
—
—
—
—
—
—
—
500MHz
23
23
21
21
23
23
22
22
23
23
22
22
23
23
22
22
23
23
22
22
22
22
22
22
23
23
Part No.
800MHz
29
29
27
27
29
29
28
28
28
28
27
27
29
29
26
26
28
28
27
27
27
27
26
26
26
26
1.8GHz
41
41
36
36
37
37
37
37
36
36
33
33
34
34
29
29
30
30
—
—
—
—
—
—
—
—
2.0GHz
41
41
36
36
37
37
37
37
35
35
32
32
33
33
27
27
28
28
—
—
—
—
—
—
—
—
2.4GHz
41
41
36
36
36
36
35
35
33
33
27
27
28
28
—
—
—
—
—
—
—
—
—
—
—
—
MHQ0603P12NHT000
MHQ0603P12NJT000
MHQ0603P13NHT000
MHQ0603P13NJT000
MHQ0603P15NHT000
MHQ0603P15NJT000
MHQ0603P16NHT000
MHQ0603P16NJT000
MHQ0603P18NHT000
MHQ0603P18NJT000
MHQ0603P20NHT000
MHQ0603P20NJT000
MHQ0603P22NHT000
MHQ0603P22NJT000
MHQ0603P24NHT000
MHQ0603P24NJT000
MHQ0603P27NHT000
MHQ0603P27NJT000
MHQ0603P30NHT000
MHQ0603P30NJT000
MHQ0603P33NHT000
MHQ0603P33NJT000
MHQ0603P36NHT000
MHQ0603P36NJT000
MHQ0603P39NHT000
MHQ0603P39NJT000
○ Measurement equipment
Product No.
Manufacturer
4291B+16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(14/16)
I
N
D
U
C
T
O
R
S
MHQ0603PType
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
100
39N
27N
22N
33N
18N
15N
12N
10N
8N2
10
6N8
5N6
Inductance (nH)
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1
0
1N0
1
10
100
Frequency (MHz)
1000
10000
○ Measurement equipment
Product No.
Manufacturer
E4991+16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(15/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
100
1N0
1N2
90
80
1N8
1N5
2N2
2N7
70
4N7
3N9
3N3
60
5N6
Q
6N8
50
8N2
10N
40
12N
30
15N
18N
20
22N
10
27N
39N
0
1
10
100
Frequency (MHz)
1000
33N
10000
○ Measurement equipment
Product No.
Manufacturer
E4991+16193A
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm
(16/16)
I
N
D
U
C
T
O
R
S
MHQ0603P Type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
1.0
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
ø21±0.8
ø180±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
Type
MHQ0603P
A
0.74±0.05
B
0.44±0.05
K
0.60 max.
A
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
K
B
4.0±0.1
2.0±0.05
160min.
Drawing direction
Taping
2.0±0.05
200min.
300min.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150105 / inductor_commercial_high-frequency_mhq0603p_en.fm