TI LM119WRQMLV Lm119qml high speed dual comparator Datasheet

LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
LM119QML High Speed Dual Comparator
Check for Samples: LM119QML
FEATURES
DESCRIPTION
•
The LM119 is a precision high speed dual
comparator fabricated on a single monolithic chip. It
is designed to operate over a wide range of supply
voltages down to a single 5V logic supply and
ground. Further, it has higher gain and lower input
currents than devices like the LM710. The
uncommitted collector of the output stage makes the
LM119 compatible with RTL, DTL and TTL as well as
capable of driving lamps and relays at currents up to
25 mA.
1
2
•
•
•
•
•
•
•
Available with radiation ensured
– High Dose Rate 100 krad(Si)
– ELDRS Free 100 krad(Si)
Two independent comparators
Operates from a single 5V supply
Typically 80 ns response time at ±15V
Minimum fan-out of 2 each side
Maximum input current of 1 μA over
temperature
Inputs and outputs can be isolated from
system ground
High common mode slew rate
Although designed primarily for applications requiring
operation from digital logic supplies, the LM119 is
fully specified for power supplies up to ±15V. It
features faster response than the LM111 at the
expense of higher power dissipation. However, the
high speed, wide operating voltage range and low
package count make the LM119 much more versatile
than older devices like the LM711.
Connection Diagrams
CDIP Package
LCCC Package
N/C
N/C
N/C
N/C
N/C
3
2
1
20
19
GND 1
4
18
OUTPUT 1
N/C
5
17
N/C
IN+ 1
6
16
V+
N/C
7
15
N/C
IN- 1
8
14
IN- 2
9
V-
Figure 1. Top View
Package Number J0014A
10
11
OUTPUT 2 N/C
12
13
GND 2
IN+ 2
Figure 2. Top View
Package Number NAJ0020A
TO-100 Package
Case is connected to pin 5 (V−).
Figure 3. Top View
Package Number LME0010C
Figure 4. Top View
Package Number NAD0010A, NAC0010A
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
Schematic Diagram
*Do not operate the LM119 with more than 16V between GND and V+
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
2
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
Absolute Maximum Ratings
(1)
Total Supply Voltage
36V
Output to Negative Supply Voltage
36V
Ground to Negative Supply Voltage
25V
Ground to Positive Supply Voltage
18V
Differential Input Voltage
Input Voltage
±5V
(2)
Power Dissipation
±15V
(3)
500 mW
Output Short Circuit Duration
10 sec
Storage Temperature Range
−65°C ≤ TA ≤ 150°C
Operating Ambient Temperature Range
−55°C ≤ TA ≤ 125°C
Maximum Junction Temperature (TJ)
150°C
Lead Temperature (Soldering, 10 sec.)
260°C
Thermal Resistance
θJA
LCCC Package
(Still Air)
LCCC Package
(500LF/Min Air flow)
89°C/W
63°C/W
TO-100 Package
(Still Air)
162°C/W
TO-100 Package
(500LF/Min Air flow)
88°C/W
CDIP Package
(Still Air)
94°C/W
CDIP Package
(500LF/Min Air flow)
52°C/W
CLGA Package
(Still Air)
215°C/W
CLGA Package
(500LF/Min Air flow)
132°C/W
CLGA Package
(Still Air)
215°C/W
CLGA Package
(500LF/Min Air flow)
132°C/W
θJC
LCCC Package
5°C/W
TO-100 Package
31°C/W
CDIP Package
11°C/W
CLGA Package
13°C/W
CLGA Package
13°C/W
Package Weight
LCCC Package
TBD
TO-100 Package
TBD
CDIP Package
TBD
CLGA Package
TBD
CLGA Package
225mg
ESD rating
(1)
(2)
(3)
(4)
(4)
800V
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
For supply voltages less than ±15V the absolute maximum input voltage is equal to the supply voltage.
The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature),
θJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any
temperature is PDmax = (TJmax - TA)/θJA or the number given in the Absolute Maximum Ratings, whichever is lower.
Human Body model, 1.5KΩ in series with 100pF.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
3
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
Table 1. Quality Conformance Inspection (1)
(1)
4
Subgroup
Description
Temp °C
1
Static tests at
25
2
Static tests at
125
3
Static tests at
-55
4
Dynamic tests at
25
5
Dynamic tests at
125
6
Dynamic tests at
-55
7
Functional tests at
25
8A
Functional tests at
125
8B
Functional tests at
-55
9
Switching tests at
25
10
Switching tests at
125
11
Switching tests at
-55
12
Settling time at
25
13
Settling time at
125
14
Settling time at
-55
Mil-Std-883, Method 5005 - Group 5
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
LM119/883 Electrical Characteristics DC Parameters
The following conditions apply, unless otherwise specified.
Symbol
+ICC
Parameter
Positive Supply Current
VCM = 0V
Conditions
Negative Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
ILeak
Output Leakage Current
+
Input Bias Current
Min
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-ICC
IIB
Notes
+
−
VCC = 5V, VCC = 0V,
VCM = 1.5V
VIO
Input Offset Voltage
Input Offset Current
mA
2
1.8
µA
1
9.5
µA
2
10.0
µA
3
0.47
5
µA
1
0.95
µA
2, 3
0.47
5
µA
1
.95
µA
2, 3
mV
1
mV
2, 3
VCC = 5V, −VCC = 0V,
VCM = 3V, RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = 12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
-75
75
nA
1
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
1.5
V
1
(1)
0.4
V
1, 2
(1)
0.6
V
3
VCC = 5V, −VCC = 0V, VCM = 1V
+
±VCC = ±15V, IO = 25mA,
VI = -5mV
VCC = 5V, −VCC = 0V,
IO= 4.0mA
+
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
(2) (3)
,
10.5
K
4
(2) (3)
,
10
K
5, 6
VCC = 5V, −VCC = 0V,
Delta VO = 4.5V, RL = 1.4KΩ
(2) (4)
,
8.0
K
4
(2) (4)
,
5.0
K
5
(2) (4)
5.8
K
6
+
,
(1)
(2)
(3)
(4)
1
6.8
±VCC = ±15V, VCM = -12V
Voltage Gain
2
mA
3.8
±VCC = ±15V, VCM = 12V
AV
1
mA
-6.8
VCC = 5V, −VCC = 0V, VCM = 3V
Output Saturation Voltage
mA
-3.8
+
VSat
11
11.5
VCC = 5V, VCC = 0V,
VCM = 1V, RS ≤ 5KΩ
+
IIO
Subgroups
-4.5
±VCC = ±15V
−
Units
-4.2
VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V,
VI = 5mV
+
Max
Output is monitored by measuring VI with limits from 0 to 6mV at all temperatures
K = V/mV.
Gain is computed with an output swing from +13.5V to +1.5V.
Gain is computed with an output swing from +5.0V to +0.5V.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
5
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
LM119-SMD Electrical Characteristics SMD 8601401 DC Parameters
The following conditions apply, unless otherwise specified.
Symbol
+ICC
-ICC
Parameter
Positive Supply Current
Negative Supply Current
ILeak
IIB
Output Leakage Current
Input Bias Current
VCM = 0V
Conditions
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
+
VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V
+
-4.2
mA
1
-4.5
mA
2
-6.0
mA
3
1.8
µA
1
(1)
2, 3
0.47
5
µA
1
(2)
.95
µA
2, 3
mV
1
6.8
mV
2, 3
(2)
-3.8
3.8
mV
1
(2)
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = 12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
2, 3
+
VCC = 5V, VCM = 1V
-6.8
6.8
mV
(2)
-75
75
nA
1
(2)
-100
100
nA
2, 3
(2)
-75
75
nA
1
(2)
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
,
1.0
3.0
V
1, 2, 3
±VCC = ±15V
(3)
-12
±VCC = ±15V, IO = 25mA,
VI ≤ -5mV
(1)
+
VCC = 5V
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
VCC = 5V, -VCC = 0V,
Delta VO = 4.5V, RL = 1.4KΩ
(2) (3)
(1)
(2)
(3)
(4)
6
±VCC = ±15V, VCM = ±12V
12
V
1, 2, 3
1.5
V
1, 2, 3
0.4
V
1, 2
0.6
V
3
(4)
10.5
K
4
(4)
10
K
5, 6
(2) (4)
,
8.0
K
4
(2) (4)
,
5.0
K
5
(2) (4)
5.8
K
6
80
dB
4
,
Common Mode Rejection Ratio
1
3.8
+
CMRR
2, 3
µA
µA
VCC = 3.5V, -VCC = -1V,
VI ≤ -6mV, IO ≤ 3.2mA
Voltage Gain
µA
0.95
+
AV
10
0.47
5
(2)
±VCC = ±15V, VCM = -12V
Output Saturation Voltage
2, 3
(1)
±VCC = ±15V, VCM = 12V
VSat
1
mA
-6.8
VCC = 5V, VCM = 3V
Input Voltage Range
mA
-3.8
+
VI
11
11.5
(2)
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VCC = 5V, VCM = 3V,
RS ≤ 5KΩ
Input Offset Current
Units
(2)
+
IIO
Subgroups
Max
±VCC = ±15V
VCC = 5V
Input Offset Voltage
Min
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
+
VIO
Notes
VI ≥ 8mV at extremes for ILeak and VI ≤ −8mV at extremes for VSat (VI to exceed VOS.
5V differential across +VCC and −VCC.
Parameter ensured by VIO and IIO tests.
K = V/mV.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
LM119 Electrical Characteristics SMD 5962-9679801, HIGH DOSE RATE DC Parameters
The following conditions apply, unless otherwise specified.
Symbol
+ICC
-ICC
Parameter
Positive Supply Current
Negative Supply Current
ILeak
IIB
Output Leakage Current
Input Bias Current
VCM = 0V
Conditions
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
+
VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V
+
-4.2
mA
1
-4.5
mA
2
-6.0
mA
3
1.8
µA
1
(1)
2, 3
0.47
5
µA
1
(2)
.95
µA
2, 3
mV
1
6.8
mV
2, 3
(2)
-3.8
3.8
mV
1
(2)
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = 12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
2, 3
+
VCC = 5V, VCM = 1V
-6.8
6.8
mV
(2)
-75
75
nA
1
(2)
-100
100
nA
2, 3
(2)
-75
75
nA
1
(2)
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
,
1.0
3.0
V
1, 2, 3
±VCC = ±15V
(3)
-12
±VCC = ±15V, IO = 25mA,
VI ≤ -5mV
(1)
+
VCC = 5V
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
VCC = 5V, -VCC = 0V,
Delta VO = 4.5V, RL = 1.4KΩ
(2) (3)
(1)
(2)
(3)
(4)
±VCC = ±15V, VCM = ±12V
12
V
1, 2, 3
1.5
V
1, 2, 3
0.4
V
1, 2
0.6
V
3
(4)
10.5
K
4
(4)
10
K
5, 6
(2) (4)
,
8.0
K
4
(2) (4)
,
5.0
K
5
(2) (4)
5.8
K
6
80
dB
4
,
Common Mode Rejection Ratio
1
3.8
+
CMRR
2, 3
µA
µA
VCC = 3.5V, -VCC = -1V,
VI ≤ -6mV, IO ≤ 3.2mA
Voltage Gain
µA
0.95
+
AV
10
0.47
5
(2)
±VCC = ±15V, VCM = -12V
Output Saturation Voltage
2, 3
(1)
±VCC = ±15V, VCM = 12V
VSat
1
mA
-6.8
VCC = 5V, VCM = 3V
Input Voltage Range
mA
-3.8
+
VI
11
11.5
(2)
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VCC = 5V, VCM = 3V,
RS ≤ 5KΩ
Input Offset Current
Units
(2)
+
IIO
Subgroups
Max
±VCC = ±15V
VCC = 5V
Input Offset Voltage
Min
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
+
VIO
Notes
VI ≥ 8mV at extremes for ILeak and VI ≤ −8mV at extremes for VSat (VI to exceed VOS.
5V differential across +VCC and −VCC.
Parameter ensured by VIO and IIO tests.
K = V/mV.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
7
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
SMD 5962-9679801, HIGH DOSE RATE DC DELTA Parameters
The following conditions apply, unless otherwise specified.
VCM = 0V, Delta calculations performed on QMLV devices at group B, subgroup 5 only.
Symbol
Parameter
Conditions
Notes
Min
Max
Units
Subgroups
+ICC
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-1.0
1.0
mA
1
-ICC
Negative Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-0.5
0.5
mA
1
VIO
Input Offset Voltage
+
-0.4
0.4
mV
1
Max
Units
Subgroups
±VCC = ±15V
1.0
µA
1
VCC = 5V
1.0
µA
1
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
SMD 5962-9679801, High Dose Rate 100K Post Radiation Parameters @ 25°C
The following conditions apply, unless otherwise specified.
Symbol
IIB
Parameter
Input Bias Current
VIO
Input Offset Voltage
VCM = 0V
Conditions
Notes
Min
+
-4.0
4.0
mV
1
+
-4.0
4.0
mV
1
±VCC = ±15V, VCM = 12V, RS ≤
5KΩ
-4.0
4.0
mV
1
±VCC = ±15V, VCM = −12V, RS ≤
5KΩ
-4.0
4.0
mV
1
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VCC = 5V, VCM = 3V, RS ≤ 5KΩ
(1)
(1)
Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post
Radiation Limits Table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate
sensitivity. Radiation end point limits for the noted parameters are ensured only for the conditions as specified in MIL-STD-883, per Test
Method 1019, Condition A.
LM119 Electrical Characteristics SMD 5962-9679802, ELDRS FREE DC Parameters
The following conditions apply, unless otherwise specified.
Symbol
Parameter
VCM = 0V
Conditions
+ICC
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-ICC
Negative Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
Notes
Min
Max
Units
Subgroups
11
mA
1
11.5
mA
2, 3
-4.2
mA
1
-4.5
mA
2
mA
3
-6.0
ILeak
IIB
Output Leakage Current
Input Bias Current
+
VCC = 15V, -VCC = -1V,
VGnd = 0V, VO = 35V
VCC = 5V
8
1.8
µA
1
(1)
10
µA
2, 3
0.47
5
µA
1
±VCC = ±15V
+
(1)
(2)
(1)
0.95
µA
2, 3
(2)
0.47
5
µA
1
(2)
.95
µA
2, 3
VI ≥ 8mV at extremes for ILeak and VI ≤ −8mV at extremes for VSat (VI to exceed VOS.
5V differential across +VCC and −VCC.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
LM119 Electrical Characteristics SMD 5962-9679802, ELDRS FREE DC Parameters (continued)
The following conditions apply, unless otherwise specified.
Symbol
VIO
Parameter
Input Offset Voltage
VCM = 0V
Conditions
+
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
+
VCC = 5V, VCM = 3V,
RS ≤ 5KΩ
IIO
Input Offset Current
Notes
Max
Units
(2)
-3.8
3.8
mV
1
(2)
-6.8
6.8
mV
2, 3
(2)
-3.8
3.8
mV
1
(2)
2, 3
-6.8
6.8
mV
±VCC = ±15V, VCM = 12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
±VCC = ±15V, VCM = -12V,
RS ≤ 5KΩ
-3.8
3.8
mV
1
-6.8
6.8
mV
2, 3
+
VCC = 5V, VCM = 1V
+
VCC = 5V, VCM = 3V
(2)
-75
75
nA
1
(2)
-100
100
nA
2, 3
(2)
-75
75
nA
1
(2)
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
-75
75
nA
1
-100
100
nA
2, 3
±VCC = ±15V, VCM = 12V
±VCC = ±15V, VCM = -12V
VI
Input Voltage Range
VSat
Output Saturation Voltage
+
(3) (3)
VCC = 5V
,
1.0
3.0
V
1, 2, 3
±VCC = ±15V
(3)
-12
12
V
1, 2, 3
±VCC = ±15V, IO = 25mA,
VI ≤ -5mV
(1)
1.5
V
1, 2, 3
0.4
V
1, 2
0.6
V
3
10.5
K
4
+
VCC = 3.5V, -VCC = -1V,
VI ≤ -6mV, IO ≤ 3.2mA
AV
Voltage Gain
±VCC = ±15V, Delta VO = 12V,
RL = 1.4KΩ
+
VCC = 5V, -VCC = 0V,
Delta VO = 4.5V, RL = 1.4KΩ
(4)
(4)
10
K
5, 6
(5) (4)
,
8.0
K
4
(5) (4)
,
5.0
K
5
(5) (4)
5.8
K
6
80
dB
4
,
CMRR
(3)
(4)
(5)
Common Mode Rejection Ratio
Subgroups
Min
±VCC = ±15V, VCM = ±12V
Parameter ensured by VIO and IIO tests.
K = V/mV.
5V differential across +VCC and −VCC.
SMD 5962-9679802, ELDRS FREE DC DELTA Parameters
The following conditions apply, unless otherwise specified.
VCM = 0V, Delta calculations performed on QMLV devices at group B, subgroup 5 only.
Symbol
Parameter
Conditions
Notes
Min
Max
Units
Subgroups
+ICC
Positive Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-1.0
1.0
mA
1
-ICC
Negative Supply Current
±VCC = ±15V, VO = Low
V+ = 5.6V thru 1.4KΩ
-0.5
0.5
mA
1
VIO
Input Offset Voltage
+
-0.4
0.4
mV
1
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
9
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
SMD 5962-9679802, ELDRS FREE 100K Post Radiation Parameters @ 25°C
The following conditions apply, unless otherwise specified.
Symbol
IIB
VIO
Input Offset Voltage
VCM = 0V
Max
Units
Subgroups
±VCC = ±15V
1.0
µA
1
VCC = 5V
1.0
µA
1
Parameter
Input Bias Current
Conditions
10
Notes
Min
+
-4.0
4.0
mV
1
+
-4.0
4.0
mV
1
±VCC = ±15V, VCM = 12V, RS ≤
5KΩ
-4.0
4.0
mV
1
±VCC = ±15V, VCM = −12V, RS ≤
5KΩ
-4.0
4.0
mV
1
VCC = 5V, VCM = 1V, RS ≤ 5KΩ
VCC = 5V, VCM = 3V, RS ≤ 5KΩ
(1)
(1)
Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post
Radiation Limits Table. Low dose rate testing has been performed on a wafer-by-wafer basis, per Test Method 1019, Condition D of
MIL-STD-883, with no enhanced low dose rate sensitivity (ELDRS).
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
Typical Performance Characteristics
Input Currents
Common Mode Limits
Figure 5.
Figure 6.
Transfer Function
Response Time for Various
Input Overdrives
Figure 7.
Figure 8.
Response Time for Various
Input Overdrives
Input Characteristics
Figure 9.
Figure 10.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
11
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
Typical Performance Characteristics (continued)
12
Response Time for Various
Input Overdrives
Response Time for Various
Input Overdrives
Figure 11.
Figure 12.
Output Saturation Voltage
Supply Current
Figure 13.
Figure 14.
Supply Current
Output Limiting
Characteristics
Figure 15.
Figure 16.
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
LM119QML
www.ti.com
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
TYPICAL APPLICATIONS
Relay Driver
Window Detector
Pin numbers are for LME0010C package.
VOUT = 5V for VLT ≤ VIN ≤ VUT
VOUT = 0 for VIN ≤ VLTor VIN ≥ VUT
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
13
LM119QML
SNOSAN3B – JULY 2008 – REVISED MARCH 2013
www.ti.com
REVISION HISTORY
Date Released
07/24/08
Revision
Section
Originator
A
New release to corporate
format
01/13/09
B
Features, Ordering Info.,
Electrical Section, Notes 13
and 14
03/26/2013
B
All Sections
14
L. Lytle
Larry McGee
Submit Documentation Feedback
Changes
2 MDS datasheets converted into one
corporate data sheet format. Added Radiation
information. MDS data sheets MNLM119-X
Rev. 0F1 & MDLM119-X Rev 2A2 will be
archived.
Added reference to ELDRS and Die NSID's to
data sheet. Correction from: 100k rd(Si) to 100
krad(Si) in ordering info. Changed wording in
Notes 13 and 14 Revision A will be Archived.
Changed layout of National Data Sheet to TI
format
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: LM119QML
PACKAGE OPTION ADDENDUM
www.ti.com
21-Jun-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
(3)
Device Marking
(4/5)
5962-9679801VCA
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119J-QMLV
5962-9679801VCA Q
5962-9679801VIA
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119H-QMLV
5962-9679801VIA Q
ACO
5962-9679801VIA Q
>T
5962R9679801V9A
ACTIVE
DIESALE
Y
0
32
Green (RoHS
& no Sb/Br)
Call TI
Level-1-NA-UNLIM
5962R9679801VCA
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119JRQMLV
5962R9679801VCA Q
5962R9679801VHA
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
RQMLV Q
5962R96798
01VHA ACO
01VHA >T
5962R9679801VIA
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119HRQMLV
5962R9679801VIA Q
ACO
5962R9679801VIA Q
>T
5962R9679801VXA
ACTIVE
CFP
NAC
10
54
TBD
Call TI
Call TI
-55 to 125
LM119WG
RQMLV Q
5962R96798
01VXA ACO
01VXA >T
5962R9679802V9A
ACTIVE
DIESALE
Y
0
32
Green (RoHS
& no Sb/Br)
Call TI
Level-1-NA-UNLIM
5962R9679802VCA
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119JRLQMLV
5962R9679802VCA Q
5962R9679802VHA
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
RLQMLV Q
5962R96798
02VHA ACO
(LM111W ~ LM119W)
02VHA >T
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
21-Jun-2013
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
5962R9679802VIA
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119HRLQMLV
5962R9679802VIA Q
ACO
5962R9679802VIA Q
>T
5962R9679802VXA
ACTIVE
CFP
NAC
10
54
TBD
Call TI
Call TI
-55 to 125
LM119WG
RLQMLV Q
5962R96798
02VXA ACO
02VXA >T
86014012A
ACTIVE
LCCC
NAJ
20
50
TBD
Call TI
Call TI
-55 to 125
LM119E
-SMD Q
5962-86014
012A ACO
012A >T
8601401CA
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119J-SMD
5962-8601401CA Q
8601401HA
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
-SMD Q
5962-86014
01HA ACO
01HA >T
8601401IA
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119H-SMD
5962-8601401IA Q A
CO
5962-8601401IA Q >
T
LM119 MDE
ACTIVE
DIESALE
Y
0
32
Green (RoHS
& no Sb/Br)
Call TI
Level-1-NA-UNLIM
LM119 MDR
ACTIVE
DIESALE
Y
0
32
Green (RoHS
& no Sb/Br)
Call TI
Level-1-NA-UNLIM
LM119E-SMD
ACTIVE
LCCC
NAJ
20
50
TBD
Call TI
Call TI
-55 to 125
LM119E
-SMD Q
5962-86014
012A ACO
012A >T
LM119E/883
ACTIVE
LCCC
NAJ
20
50
TBD
Call TI
Call TI
-55 to 125
LM119E
/883 Q ACO
/883 Q >T
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
21-Jun-2013
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
LM119H-QMLV
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119H-QMLV
5962-9679801VIA Q
ACO
5962-9679801VIA Q
>T
LM119H-SMD
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119H-SMD
5962-8601401IA Q A
CO
5962-8601401IA Q >
T
LM119H/883
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119H/883 Q ACO
LM119H/883 Q >T
LM119HRLQMLV
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119HRLQMLV
5962R9679802VIA Q
ACO
5962R9679802VIA Q
>T
LM119HRQMLV
ACTIVE
TO-100
LME
10
20
TBD
Call TI
Call TI
-55 to 125
LM119HRQMLV
5962R9679801VIA Q
ACO
5962R9679801VIA Q
>T
LM119J-QMLV
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119J-QMLV
5962-9679801VCA Q
LM119J-SMD
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119J-SMD
5962-8601401CA Q
LM119J/883
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119J/883 Q
LM119JRLQMLV
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119JRLQMLV
5962R9679802VCA Q
LM119JRQMLV
ACTIVE
CDIP
J
14
25
TBD
Call TI
Call TI
-55 to 125
LM119JRQMLV
5962R9679801VCA Q
LM119W-SMD
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
-SMD Q
5962-86014
01HA ACO
01HA >T
LM119W/883
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
/883 Q ACO
Addendum-Page 3
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
21-Jun-2013
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Device Marking
(3)
(4/5)
/883 Q >T
LM119WGRLQMLV
ACTIVE
CFP
NAC
10
54
TBD
Call TI
Call TI
-55 to 125
LM119WG
RLQMLV Q
5962R96798
02VXA ACO
02VXA >T
LM119WGRQMLV
ACTIVE
CFP
NAC
10
54
TBD
Call TI
Call TI
-55 to 125
LM119WG
RQMLV Q
5962R96798
01VXA ACO
01VXA >T
LM119WRLQMLV
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
RLQMLV Q
5962R96798
02VHA ACO
(LM111W ~ LM119W)
02VHA >T
LM119WRQMLV
ACTIVE
CFP
NAD
10
19
TBD
Call TI
Call TI
-55 to 125
LM119W
RQMLV Q
5962R96798
01VHA ACO
01VHA >T
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 4
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
21-Jun-2013
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LM119QML, LM119QML-SP :
• Military: LM119QML
• Space: LM119QML-SP
NOTE: Qualified Version Definitions:
• Military - QML certified for Military and Defense Applications
• Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
Addendum-Page 5
MECHANICAL DATA
NAJ0020A
E20A (Rev F)
www.ti.com
MECHANICAL DATA
NAC0010A
WG10A (Rev H)
www.ti.com
MECHANICAL DATA
NAD0010A
W10A (Rev H)
www.ti.com
MECHANICAL DATA
MMBC006 – MARCH 2001
LME (O–MBCY–W10)
METAL CYLINDRICAL PACKAGE
ø
0.370 (9,40)
0.335 (8,51)
ø
0.335 (8,51)
0.305 (7,75)
0.040 (1,02)
0.010 (0,25)
0.185 (4,70)
0.165 (4,19)
0.040 (1,02)
0.010 (0,25)
0.500 (12,70) MIN
Seating
Plane
ø
ø
0.021 (0,53)
0.016 (0,41)
0.160 (4,06)
0.120 (3,05)
0.120 (3,05)
0.110 (2,79)
4
3
0.034 (0,86)
0.028 (0,71)
36°
5
2
6
1
10
7
9
8
0.230 (5,84)
0.045 (1,14)
0.029 (0,74)
4202488/A 03/01
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Leads in true position within 0.010 (0,25) R @ MMC at seating plane.
Pin numbers shown for reference only. Numbers may not be marked on package.
Falls within JEDEC MO–006/TO-100.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated