Agilent T-13/4 (5 mm), T-1 (3 mm), Low Current, Double Heterojunction AlGaAs Red LED Lamps Data Sheet HLMP-D150/D155, HLMP-K150/K155 Description These solid state LED lamps utilize newly developed double heterojunction (DH) AlGaAs/GaAs material technology. This LED material has outstanding light output efficiency at very low drive currents. The color is deep red at the dominant wavelength of 637 nanometres. These lamps are ideally suited for use in applications where high light output is required with minimum power output. Features • Minimum luminous intensity specified at 1 mA • High light output at low currents • Wide viewing angle • Outstanding material efficiency • Low power/low forward voltage • CMOS/MOS compatible • TTL compatible • Deep red color Applications • Low power circuits • Battery powered equipment • Telecommunication indicators Package Dimensions 3.43 (0.135) 2.92 (0.115) 3.17 (0.125) ∅ 2.67 (0.105) 4.70 (0.185) 4.19 (0.165) 6.35 (0.250) 5.58 (0.220) 1.14 (0.045) 0.51 (0.020) SHOULDER 0.65 (0.026) MAX. 0.55 (0.022) SQ. TYP. 0.40 (0.016) 24.1 MIN. (0.95) CATHODE A B 1.52 (0.060) 1.02 (0.040) 2.79 (0.110) 2.29 (0.090) C Selection Guide Package Description T-1 3/4 Red Tinted Diffused T-1 3/4 Red Untinted Non-diffused T-1 Red Tinted Diffused T-1 Red Untinted Non-diffused Device HLMPD150 D150-C00xx D150-CD0xx D155 D155-F00xx K150 K150-C00xx K150-CD0xx K155 K155-CD0xx K155-D00xx K155-DE0xx Luminous Intensity Iv (mcd) at 1 mA Min. Typ. 1.3 3.0 1.3 3.0 1.3 3.0 5.4 10.0 5.4 10.0 1.3 2.0 1.3 2.0 1.3 3.0 2.1 3.0 1.3 3.0 2.1 3.0 2.1 3.0 Max. – – 4.2 – – – – 4.2 – 4.2 – 6.8 Note: 1. θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 the on-axis value. Part Numbering System HLMP - x 1 xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads A1, B1: Right Angle Housing, Uneven Leads A2, B2: Right Angle Housing, Even Leads DD, DH: Ammo Pack Color Bin Optioms 0: Full color bin distribution Maximum Iv Bin Options 0: Open (No max. limit) Others: Please refer to the Iv bin table Minimum Iv Bin Options Please refer to the Iv bin table Lens Option 50: Tinted, Diffused 55: Untinted, Nondiffused Package Options D: T-13/4 (5 mm) K: T-1 (3 mm) 2 2θ1/2[1] Degree 65 65 65 24 24 60 60 60 45 45 45 45 Package Outline A A A B B C C C C C C C Absolute Maximum Ratings at TA = 25°C Parameter Peak Forward Current[1] Average Forward Current DC Current[2] Power Dissipation Reverse Voltage (IR = 100 µA) Transient Forward Current (10 µs Pulse)[3] LED Junction Temperature Operating Temperature Range Storage Temperature Range Wave Soldering Temperature [1.59 mm (0.063 in.) from body] Lead Solder Dipping Temperature [1.59 mm (0.063 in.) from body] Value 300 mA 20 mA 30 mA 87 mW 5V 500 mA 110°C -20 to +100°C -55 to +100°C 250°C for 3 seconds 260°C for 5 seconds Notes: 1. Maximum IPEAK at f = 1 kHz, DF = 6.7%. 2. Derate linearly as shown in Figure 4. 3. The transient peak current is the maximum non-recurring peak current the device can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current. Electrical/Optical Characteristics at TA = 25°C Symbol Description VF VR λp λd ∆λ1/2 τS Forward Voltage Reverse Breakdown Voltage Peak Wavelength Dominant Wavelength Spectral Line Halfwidth Speed of Response C RθJ-PIN Capacitance Thermal Resistance ηV Luminous Efficacy Min. 5.0 Typ. Max. Unit Test Condition 1.6 15.0 645 637 20 30 1.8 V V nm nm nm ns IF = 1 mA IR = 100 µA Measurement at Peak Note 1 30 260[3] 210[4] 290[5] 80 pF °C/W Exponential Time Constant, e-t/TS VF = 0, f = 1 MHz Junction to Cathode Lead Im/W Note 2 Notes: 1. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the color of the device. 2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = lV/ηV, where IV is the luminous intensity in candelas and ηV is luminous efficacy in lumens/watt. 3. HLMP-D150. 4. HLMP-D155. 5. HLMP-K150/-K155. 3 Figure 1. Relative intensity vs. wavelength. Figure 2. Forward current vs. forward voltage. Figure 3. Relative luminous intensity vs. dc forward current. Figure 4. Maximum forward dc current vs. ambient temperature. Derating based on TJ Max. = 110 °C. Figure 5. Relative luminous intensity vs. angular displacement. HLMP-D150. Figure 6. Relative luminous intensity vs. angular displacement. HLMP-K150. 4 Figure 7. Relative luminous intensity vs. angular displacement. HLMP-D155. Intensity Bin Limits Color Red 5 Bin C D E F G H I J K L M N O P Q R S T U V W X Y Z Intensity Range (mcd) Min. Max. 1.5 2.4 2.4 3.8 3.8 6.1 6.1 9.7 9.7 15.5 15.5 24.8 24.8 39.6 39.6 63.4 63.4 101.5 101.5 162.4 162.4 234.6 234.6 340.0 340.0 540.0 540.0 850.0 850.0 1200.0 1200.0 1700.0 1700.0 2400.0 2400.0 3400.0 3400.0 4900.0 4900.0 7100.0 7100.0 10200.0 10200.0 14800.0 14800.0 21400.0 21400.0 30900.0 Figure 8. Relative luminous intensity vs. angular displacement. HLMP-K155. Mechanical Option Matrix Mechanical Option Code 00 01 02 A1 A2 B1 B2 DD DH Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, crimped leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1 Tape & Reel, straight leads, minimum increment 1300 pcs for T-13/4, 1800 pcs for T-1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-1, Right Angle Housing, even leads, minimum increment 500 pcs/bag T-13/4, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag T-13/4, Right Angle Housing, even leads, minimum increment 500 pcs/bag Ammo Pack, straight leads with minimum 2K increment Ammo Pack, straight leads with minimum 2K increment Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5968-1438EN November 12, 2004 5988-2229EN