Part Number: LMY12D T-1 3/4 (5mm) SOLID STATE LAMP www.SunLED.com Features z LOW POWER CONSUMPTION. z POPULAR T-1 3/4 DIAMETER PACKAGE. z GENERAL PURPOSE LEADS. z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MY (InGaAlP) Unit 2.0 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 150 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 75 mW λP 590 nm TA -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Tstg -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 588 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 25 pF 5 V Forward Current IF 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds LMY12D Unit VF VR Part Number MY (InGaAlP) Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Emitting Color Yellow Published Date : MAR 26, 2008 °C Emitting Material InGaAlP Lens-color Yellow Diffused Drawing No : SDSA3593 V5 Luminous Intensity (IF=20mA) mcd min. typ. 180 597 Checked : B.L.LIU Wavelength nm λP Viewing Angle 2θ 1/2 590 30 ° P.1/4 Part Number: LMY12D T-1 3/4 (5mm) SOLID STATE LAMP www.SunLED.com MY Published Date : MAR 26, 2008 Drawing No : SDSA3593 V5 Checked : B.L.LIU P.2/4 Part Number: LMY12D T-1 3/4 (5mm) SOLID STATE LAMP www.SunLED.com Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 26, 2008 Drawing No : SDSA3593 V5 Checked : B.L.LIU P.3/4 Part Number: T-1 3/4 (5mm) SOLID STATE LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : MAR 26, 2008 LMY12D Drawing No : SDSA3593 LMY12D V5 Checked : B.L.LIU P.4/4