E2G0009-17-41 ¡ Semiconductor MSM511000C/CL ¡ Semiconductor This version: Jan. 1998 MSM511000C/CL Previous version: May 1997 1,048,576-Word ¥ 1-Bit DYNAMIC RAM : FAST PAGE MODE TYPE DESCRIPTION The MSM511000C/CL is a 1,048,576-word ¥ 1-bit dynamic RAM fabricated in Oki's silicon-gate CMOS technology. The MSM511000C/CL achieves high integration, high-speed operation, and low-power consumption because Oki manufactures the device in a quadruple-layer polysilicon/ single-layer metal CMOS process. The MSM511000C/CL is available in a 26/20-pin plastic SOJ or 20-pin plastic ZIP. The MSM511000CL (the low-power version) is specially designed for lowerpower applications. FEATURES • 1,048,576-word ¥ 1-bit configuration • Single 5 V power supply, ±10% tolerance • Input : TTL compatible, low input capacitance • Output : TTL compatible, 3-state • Refresh : 512 cycles/8 ms, 512 cycles/64 ms (L-version) • Fast page mode, read modify write capability • CAS before RAS refresh, hidden refresh, RAS-only refresh capability • Package options: 26/20-pin 300 mil plastic SOJ (SOJ26/20-P-300-1.27) (Product : MSM511000C/CL-xxJS) 20-pin 400 mil plastic ZIP (ZIP20-P-400-1.27) (Product : MSM511000C/CL-xxZS) xx indicates speed rank. PRODUCT FAMILY Family MSM511000C/CL-45 Access Time (Max.) Cycle Time Power Dissipation (Min.) Operating (Max.) Standby (Max.) tRAC tAA tCAC 45 ns 24 ns 14 ns 90 ns 468 mW MSM511000C/CL-50 50 ns 26 ns 14 ns 100 ns 440 mW 5.5 mW/ MSM511000C/CL-60 60 ns 30 ns 15 ns 120 ns 385 mW 1.1 mW (L-version) MSM511000C/CL-70 70 ns 35 ns 20 ns 130 ns 330 mW 1/15 ¡ Semiconductor , MSM511000C/CL PIN CONFIGURATION (TOP VIEW) DIN 1 26 VSS WE 2 RAS 3 NC 4 NC 5 A0 9 A1 10 A2 11 A3 12 VCC 13 A9 1 25 DOUT DOUT 3 24 CAS DIN 5 23 NC RAS 7 22 A9 NC 9 A0 11 18 A8 A2 13 17 A7 VCC 15 16 A6 A5 17 15 A5 A7 19 14 A4 26/20-Pin Plastic SOJ Pin Name A0 - A9 RAS 2 CAS 4 VSS 6 WE 8 NC NO LEAD 12 A1 14 A3 16 A4 18 A6 20 A8 20-Pin Plastic ZIP Function Address Input Row Address Strobe CAS Column Address Strobe DIN Data Input DOUT Data Output WE Write Enable VCC Power Supply (5 V) VSS Ground (0 V) NC No Connection 2/15 ¡ Semiconductor MSM511000C/CL BLOCK DIAGRAM Timing Generator RAS Timing Generator CAS 10 Column Address Buffers 10 Internal Address Counter A0 - A9 10 Row Address Buffers Refresh Control Clock 10 Row Decoders Word Drivers Column Decoders Write Clock Generator Sense Amplifiers I/O Selector Memory Cells Input Buffer WE Output Buffer DOUT DIN VCC On Chip VBB Generator VSS 3/15 ¡ Semiconductor MSM511000C/CL ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Parameter Symbol Rating Unit VT –1.0 to 7.0 V Short Circuit Output Current IOS 50 mA Power Dissipation PD* 1 W Operating Temperature Topr 0 to 70 °C Storage Temperature Tstg –55 to 150 °C Voltage on Any Pin Relative to VSS *: Ta = 25°C Recommended Operating Conditions Parameter Power Supply Voltage (Ta = 0°C to 70°C) Symbol Min. Typ. Max. Unit VCC 4.5 5.0 5.5 V VSS 0 0 0 V Input High Voltage VIH 2.4 — 6.5 V Input Low Voltage VIL –1.0 — 0.8 V Capacitance (VCC = 5 V ±10%, Ta = 25°C, f = 1 MHz) Symbol Typ. Max. Unit CIN1 — 5 pF Input Capacitance (RAS, CAS, WE) CIN2 — 5 pF Output Capacitance (DOUT) COUT — 6 pF Parameter Input Capacitance (A0 - A9, DIN) 4/15 ¡ Semiconductor MSM511000C/CL DC Characteristics Parameter (VCC = 5 V ±10%, Ta = 0°C to 70°C) Symbol Condition MSM511000 MSM511000 MSM511000 MSM511000 C/CL-45 C/CL-50 C/CL-60 C/CL-70 Unit Note Min. Max. Min. Max. Min. Max. Min. Max. Output High Voltage VOH IOH = –5.0 mA 2.4 VCC 2.4 VCC 2.4 VCC 2.4 VCC V Output Low Voltage VOL IOL = 4.2 mA 0 0.4 0 0.4 0 0.4 0 0.4 V Input Leakage Current ILI All other pins not –10 10 –10 10 –10 10 –10 10 mA –10 10 –10 10 –10 10 –10 10 mA — 85 — 80 — 70 — 60 mA 1, 2 RAS, CAS = VIH — 2 — 2 — 2 — 2 RAS, CAS — 1 — 1 — 1 — 1 mA 1 ≥ VCC –0.2 V — 200 — 200 — 200 — 200 mA 1, 5 — 85 — 80 — 70 — 60 mA 1, 2 — 5 — 5 — 5 — 5 mA 1 — 85 — 80 — 70 — 60 mA 1, 2 — 80 — 75 — 65 — 55 mA 1, 3 — 300 — 300 — 300 — 300 mA 1, 4, 5 0 V £ VI £ 6.5 V; under test = 0 V Output Leakage Current ILO Average Power Supply Current ICC1 (Operating) Power Supply Current (Standby) ICC2 0 V £ VO £ 5.5 V RAS, CAS cycling, tRC = Min. RAS cycling, Average Power Supply Current DOUT disable ICC3 (RAS-only Refresh) CAS = VIH, tRC = Min. RAS = VIH, Power Supply Current (Standby) ICC5 Average Power Supply Current ICC6 (CAS before RAS Refresh) RAS cycling, CAS before RAS RAS = VIL, Average Power Supply Current CAS = VIL, DOUT = enable ICC7 CAS cycling, (Fast Page Mode) tPC = Min. Average Power tRC = 125 ms, Supply Current (Battery Backup) Notes : 1. 2. 3. 4. 5. ICC10 CAS before RAS, tRAS £ 1 ms ICC Max. is specified as ICC for output open condition. The address can be changed once or less while RAS = VIL. The address can be changed once or less while CAS = VIH. VCC – 0.2 V £ VIH £ 6.5 V, –1.0 V £ VIL £ 0.2 V. L-version. 5/15 ¡ Semiconductor MSM511000C/CL AC Characteristics (1/2) (VCC = 5 V ±10%, Ta = 0°C to 70°C) Note 1, 2, 3 Parameter Symbol MSM511000 MSM511000 MSM511000 MSM511000 C/CL-45 C/CL-50 C/CL-60 C/CL-70 Unit Note Min. Max. Min. Max. Min. Max. Min. Max. tRC 90 — 100 — 120 — 130 — ns tRWC 110 — 120 — 140 — 155 — ns tPC 34 — 36 — 40 — 45 — ns tPRWC 54 — 56 — 60 — 70 — ns Access Time from RAS tRAC — 45 — 50 — 60 — 70 ns 4, 5, 6 Access Time from CAS tCAC — 14 — 14 — 15 — 20 ns 4, 5 Access Time from Column Address tAA — 24 — 26 — 30 — 35 ns 4, 6 Access Time from CAS Precharge tCPA — 28 — 30 — 35 — 40 ns 4 Output Low Impedance Time from CAS tCLZ 0 — 0 — 0 — 0 — ns 4 CAS to Data Output Buffer Turn-off Delay Time tOFF Random Read or Write Cycle Time Read Modify Write Cycle Time Fast Page Mode Cycle Time Fast Page Mode Read Modify Write Cycle Time 0 14 0 14 0 15 0 20 ns 7 Transition Time tT 3 50 3 50 3 50 3 50 ns 3 Refresh Period tREF — 8 — 8 — 8 — 8 ms Refresh Period (L-version) tREF — 64 — 64 — 64 — 64 ms RAS Precharge Time tRP 35 — 40 — 50 — 50 — ns RAS Pulse Width tRAS 45 10,000 50 10,000 60 10,000 70 10,000 ns RAS Pulse Width (Fast Page Mode) tRASP 45 100,000 50 100,000 60 100,000 70 100,000 ns RAS Hold Time tRSH 14 — 14 — 15 — 20 — ns CAS Precharge Time (Fast Page Mode) tCP 10 — 10 — 10 — 10 — ns CAS Pulse Width tCAS 14 10,000 14 10,000 15 10,000 20 10,000 ns CAS Hold Time tCSH 45 — 50 — 60 — 70 — ns CAS to RAS Precharge Time tCRP 5 — 5 — 5 — 5 — ns RAS Hold Time from CAS Precharge tRHCP 28 — 30 — 35 — 40 — ns RAS to CAS Delay Time tRCD 17 31 18 36 20 45 20 50 ns 5 RAS to Column Address Delay Time tRAD 12 21 13 24 15 30 15 35 ns 6 Row Address Set-up Time tASR 0 — 0 — 0 — 0 — ns Row Address Hold Time tRAH 7 — 8 — 10 — 10 — ns Column Address Set-up Time tASC 0 — 0 — 0 — 0 — ns Column Address Hold Time tCAH 12 — 13 — 15 — 15 — ns Column Address Hold Time from RAS tAR 35 — 40 — 50 — 55 — ns Column Address to RAS Lead Time tRAL 24 — 26 — 30 — 35 — ns 6/15 ¡ Semiconductor MSM511000C/CL AC Characteristics (2/2) (VCC = 5 V ±10%, Ta = 0°C to 70°C) Note 1, 2, 3 Parameter Symbol MSM511000 MSM511000 MSM511000 MSM511000 C/CL-45 C/CL-50 C/CL-60 C/CL-70 Unit Note Min. Max. Min. Max. Min. Max. Min. Max. Read Command Set-up Time tRCS 0 — 0 — 0 — 0 — ns Read Command Hold Time tRCH 0 — 0 — 0 — 0 — ns 8 Read Command Hold Time referenced to RAS tRRH 0 — 0 — 0 — 0 — ns 8 9 Write Command Set-up Time tWCS 0 — 0 — 0 — 0 — ns Write Command Hold Time tWCH 10 — 10 — 10 — 15 — ns Write Command Hold Time from RAS tWCR 35 — 40 — 50 — 55 — ns Write Command Pulse Width tWP 10 — 10 — 10 — 15 — ns Write Command to RAS Lead Time tRWL 14 — 14 — 15 — 20 — ns Write Command to CAS Lead Time tCWL 14 — 14 — 15 — 20 — ns Data-in Set-up Time tDS 0 — 0 — 0 — 0 — ns 10 Data-in Hold Time tDH 12 — 13 — 15 — 15 — ns 10 Data-in Hold Time from RAS tDHR 35 — 40 — 50 — 55 — ns CAS to WE Delay Time tCWD 14 — 14 — 15 — 20 — ns 9 Column Address to WE Delay Time tAWD 24 — 26 — 30 — 35 — ns 9 RAS to WE Delay Time tRWD 45 — 50 — 60 — 70 — ns 9 CAS Precharge WE Delay Time tCPWD 33 — 35 — 40 — 45 — ns 9 CAS Active Delay Time from RAS Precharge tRPC 0 — 0 — 0 — 0 — ns RAS to CAS Set-up Time (CAS before RAS) tCSR 10 — 10 — 10 — 10 — ns RAS to CAS Hold Time (CAS before RAS) 25 — 25 — 30 — 30 — ns tCHR 7/15 ¡ Semiconductor Notes: MSM511000C/CL 1. A start-up delay of 100 µs is required after power-up, followed by a minimum of eight initialization cycles (RAS-only refresh or CAS before RAS refresh) before proper device operation is achieved. 2. The AC characteristics assume tT = 5 ns. 3. VIH (Min.) and VIL (Max.) are reference levels for measuring input timing signals. Transition times (tT) are measured between VIH and VIL. 4. This parameter is measured with a load circuit equivalent to 2 TTL loads and 100 pF. 5. Operation within the tRCD (Max.) limit ensures that tRAC (Max.) can be met. tRCD (Max.) is specified as a reference point only. If tRCD is greater than the specified tRCD (Max.) limit, then the access time is controlled by tCAC. 6. Operation within the tRAD (Max.) limit ensures that tRAC (Max.) can be met. tRAD (Max.) is specified as a reference point only. If tRAD is greater than the specified tRAD (Max.) limit, then the access time is controlled by tAA. 7. tOFF (Max.) defines the time at which the output achieves the open circuit condition and is not referenced to output voltage levels. 8. tRCH or tRRH must be satisfied for a read cycle. 9. tWCS, tCWD, tRWD, tAWD and tCPWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS ≥ tWCS (Min.), then the cycle is an early write cycle and the data out will remain open circuit (high impedance) throughout the entire cycle. If tCWD ≥ tCWD (Min.) , tRWD ≥ tRWD (Min.), tAWD ≥ tAWD (Min.) and tCPWD ≥ tCPWD (Min.), then the cycle is a read modify write cycle and data out will contain data read from the selected cell; if neither of the above sets of conditions is satisfied, then the condition of the data out (at access time) is indeterminate. 10. These parameters are referenced to the CAS leading edge in an early write cycle, and to the WE leading edge in a read modify write cycle. 8/15 E2G0088-17-41A ¡ Semiconductor MSM511000C/CL TIMING WAVEFORM Read Cycle tRC tCSH tCRP CAS tRP tRAS VIH – RAS V IL – tRCD VIH – VIL – tCRP tRSH tCAS , , , ,, , tRAD tASR Address VIH – VIL – tRAH tRAL tCAH tASC Row Column tAR tRRH tRCS WE VIH – VIL – tRCH tCAC tAA DOUT VOH – VOL – tOFF tCLZ tRAC Open Valid Data "H" or "L" Write Cycle (Early Write) tRC tRCD tCRP CAS tRSH tCSH VIH – VIL – tAR tASR tRAH tRAL tCAH tASC Row Column tCWL tWCR tWCS tWCH VIH – WE VIL – tWP tRWL tDHR tDS DIN VIH – VIL – DOUT VOH – VOL – tCRP tCAS tRAD Address VIH – VIL – tRP tRAS VIH – RAS V – IL tDH Valid Data Open "H" or "L" 9/15 ¡ Semiconductor MSM511000C/CL Read Modify Write Cycle tRWC tCRP CAS tRP tRAS VIH – RAS VIL – tRSH tRCD tCRP tRWL tCAS VIH – VIL – ,, , , , tASR Address VIH – VIL – tCSH tAR tRAD tCWL tRAL tCAH tASC tRAH Row Column tAWD tRWD tWP tCWD VIH – WE VIL – tRCS tDS DIN VIH – VIL – tDH Valid Data tCAC tAA tOFF tRAC DOUT VOH – VOL – Open Valid Data tCLZ "H" or "L" Fast Page Mode Read Cycle tRASP VIH – RAS VIL – tCSH tRCD tCRP CAS tCAS VIH – VIL – tRAH tAR tASC Row tASC tCAH Column tRAD tRCH VIH – VIL – tCAH tRCS tCAC tCRP tRAC VOH – VOL – Valid Data tCLZ tRAL tCAH tASC Column tRRH tRCH tRCS tCAC tAA DOUT tRSH tCAS tCP Column tRCS WE tPC tCAS tCP VIH – VIL – tASR Address tRP tRHCP tCAC tAA tAA tCPA tCPA tOFF tCLZ tRCH Valid Data tOFF tCLZ Valid Data tOFF "H" or "L" 10/15 ¡ Semiconductor MSM511000C/CL Fast Page Mode Write Cycle (Early Write) tRP tRASP RAS VIH – VIL – tRHCP tCRP CAS tCAS tRCD VIH – VIL – tAR tASC tPC tCAS tCP tRSH tCAS tCP tCRP tRAL tCAH , , , ,, tASR Address VIH – VIL – tRAH Row tCAH Column tRAD tWCS tCWL Column tWCH tWCS tDH tDS tWP tDS DIN VIH – VIL – tASC Column tRWL tWCR VIH – WE VIL – tCAH tASC Valid Data tCWL tWCH tWP tCWL tWCH tWP tWCS tDS tDH Valid Data tDH Valid Data tDHR DOUT VOH – VOL – Open "H" or "L" Fast Page Mode Read Modify Write Cycle tRASP RAS VIH – VIL – tRHCP tCSH tRCD V CAS IH – VIL – tASR Address VIH – VIL – tAR tRAH tASC Row WE tCAH tAWD tAA tRAD DOUT DIN VOH – VOL – VIH – VIL – tWP tCAC tRAC tCLZ tOFF tDH tDS Valid Data tCAH tCWL tRCS tAWD tCPA tAA tCAC Valid Data tCRP tRAL Column tCPWD tCWD tCWL tRCS tRP tCAS tASC Column tRWD tCWD VIH – VIL – tCP tCAH tASC Column tRCS tPRWC tCAS tCP tCAS tRSH tWP tOFF Valid Data tCLZ tDH tDS Valid Data tCLZ tCPWD tCWD tAWD tCPA tAA tCAC tCWL tWP tOFF Valid Data tRWL tDH tDS Valid Data "H" or "L" 11/15 , ¡ Semiconductor MSM511000C/CL RAS-Only Refresh Cycle tRC tRP tRAS VIH – RAS VIL – tCRP CAS Address VIH – VIL – VIH – VIL – tRPC tRAH tASR Row tOFF DOUT VOH – VOL – Open Note: WE = "H" or "L" "H" or "L" CAS before RAS Refresh Cycle tRC tRAS RAS VIH – VIL – tRP tRPC tCP tCSR tCHR V CAS IH – VIL – tOFF DOUT VOH – VOL – Open Note: WE, Address = "H" or "L" 12/15 ¡ Semiconductor MSM511000C/CL Hidden Refresh Read Cycle tRC tRAS tRP tRAS VIH – RAS VIL – tCRP CAS tRSH tRCD tCHR VIH – VIL – , , ,, tRAD tASR Address VIH – VIL – tRAL tRAH tCAH tASC Row Column tAR tRCS WE tRRH VIH – VIL – tCAC tAA tOFF tRAC DOUT VOH – VOL – Valid Data tCLZ "H" or "L" Hidden Refresh Write Cycle tRC tRP tRAS tRAS VIH – RAS VIL – tCRP CAS tRSH tRCD VIH – VIL – tAR tRAD tASR Address VIH – VIL – tRAH tRAL tCAH tASC Row Column tRAD tWCR tRWL tWCH tWCS WE VIH – VIL – tWP tDS DIN VIH – VIL – tCHR tDH Valid Data tDHR DOUT VOH – VOL – Open "H" or "L" 13/15 ¡ Semiconductor MSM511000C/CL PACKAGE DIMENSIONS (Unit : mm) SOJ26/20-P-300-1.27 Mirror finish Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin 42 alloy Solder plating 5 mm or more 0.80 TYP. Notes for Mounting the Surface Mount Type Package The SOP, QFP, TSOP, SOJ, QFJ (PLCC), SHP and BGA are surface mount type packages, which are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki’s responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times). 14/15 ¡ Semiconductor MSM511000C/CL (Unit : mm) ZIP20-P-400-1.27 Mirror finish Package material Lead frame material Pin treatment Solder plate thickness Package weight (g) Epoxy resin 42 alloy Solder plating 5 mm or more 1.50 TYP. 15/15