Surface Mount Aluminum Electrolytic Capacitors NACKA Series FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • LOW IMPEDANCE AND WIDE TEMPERATURE • LONG LIFE (5,000 HOURS @ 105OC) • AVAILABLE WITH ANTI-VIBRATION WIDE TERMINATIONS • DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING CHARACTERISTICS Rated Voltage Range Rated Capactance Range Operating Temperature Range Capacitance Tolerance Maximum Leakage Current after 2 minutes @ 20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test @ 105°C 5,000 Hours Shelf Life Test @ 105°C 1,000 Hours Resistance to Soldering Heat Within Recommended Reflow Conditions includes all homogeneous materials *See Part Number System for Details 0.01CV whichever is greater W.V. (Vdc) S.V. (Vdc) Maximum Tanδ @ 120Hz/20°C RoHS Compliant 6.3 ~ 100Vdc 47 ~ 6,800μF -55°C ~ +105°C ±20%(M) C ≤ 1,000μF C = 1,500μF C = 2,200μF All Case Sizes C = 3,300μF C = 4,700μF C = 6,800μF Z -25°C/Z +20°C Z -40°C/Z +20°C Z -55°C/Z +20°C Capacitance Change Tanδ Leakage Current Capacitance Change Tanδ Leakage Current Capacitance Change Tanδ Leakage Current 6.3 8.0 0.26 0.30 0.36 2 3 4 10 16 25 35 50 63 80 13 20 32 44 63 79 100 0.19 0.16 0.14 0.12 0.12 0.10 0.08 0.16 0.16 0.12 0.21 0.16 0.20 0.18 0.25 0.22 0.29 2 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 3 3 3 3 3 Within ±30% of initial measured value Less than 200% of specified value Less than specified maximum value Within ±30% of initial measured value Less than 200% of specified value Less than specified maximum value Within ±10% of initial measured value Less than specified maximum value Less than specified maximum value 100 125 0.07 2 3 3 STANDARD PRODUCT AND CASE SIZE Dφ xL (mm) Cap (μF) Code 47 68 100 150 220 330 390 470 560 680 1000 1500 2200 3300 4700 6800 470 680 101 151 221 331 391 471 561 681 102 152 222 332 472 682 6.3 12.5x14 16x17 10 12.5x14 16x17 18x17 16 12.5x14 16x17 18x17 - Working Voltage (Vdc) 25 35 50 12.5x14 12.5x14 12.5x14 16x17 16x17 12.5x14 16x17 12.5x14 16x17 16x17 16x17 16x17 16x17 18x17 - 63 12.5x14 12.5x14 16x17 18x17 - 80 12.5x14 12.5x14 12.5x14 16x17 18x17 - 100 12.5x14 12.5x14 16x17 16x17 18x17 18x17 - PRECAUTIONS Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com NACK rev. 1 05212007 www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 63 Surface Mount Aluminum Electrolytic Capacitors NACKA Series STANDARD VALUES, CASE SIZES AND SPECIFICATIONS NIC Part Number* NACKA332M6.3V12.5X14TR13F NACKA682M6.3V16X17TR13F NACKA222M10V12.5X14TR13F NACKA472M10V16X17TR13F NACKA682M10V18X17TR13F NACKA152M16V12.5X14TR13F NACKA332M16V16X17TR13F NACKA472M16V18X17TR13F NACKA102M25V12.5X14TR13F NACKA152M25V16X17TR13F NACKA222M25V16X17TR13F NACKA332M25V18X17TR13F NACKA471M35V12.5X14TR13F NACKA681M35V12.5X14TR13F NACKA102M35V16X17TR13F NACKA152M35V16X17TR13F NACKA331M50V12.5X14TR13F NACKA391M50V12.5X14TR13F NACKA471M50V16X17TR13F NACKA561M50V16X17TR13F NACKA681M50V16X17TR13F NACKA102M50V16X17TR13F NACKA151M63V12.5X14TR13F NACKA221M63V12.5X14TR13F NACKA471M63V16X17TR13F NACKA681M63V18X17TR13F NACKA680M80V12.5X14TR13F NACKA101M80V12.5X14TR13F NACKA151M80V12.5X14TR13F NACKA331M80V16X17TR13F NACKA471M80V18X17TR13F NACKA470M100V12.5X14TR13F NACKA680M100V12.5X14TR13F NACKA101M100V16X17TR13F NACKA151M100V16X17TR13F NACKA221M100V18X17TR13F NACKA331M100V18X17TR13F Cap. (μF) 3300 6800 2200 4700 6800 1500 3300 4700 1000 1500 2200 3300 470 680 1000 1500 330 390 470 560 680 1000 150 220 470 680 68 100 150 330 470 47 68 100 150 220 330 W.V. (Vdc) 6.3 10 16 25 35 50 63 80 100 Dissipaton Factor (Tan δ) 0.30 0.36 0.21 0.25 0.29 0.16 0.20 0.22 0.14 0.16 0.16 0.18 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 0.08 0.08 0.08 0.08 0.08 0.07 0.07 0.07 0.07 0.07 0.07 Max. Ripple Current (mA) +105°C/100KHz 1100 1800 1100 1800 2060 1100 1800 2060 1100 1800 1800 2060 1100 1100 1800 1800 900 900 1610 1610 1610 1610 800 800 1410 1680 500 500 500 793 917 500 500 793 793 917 917 Max. Impedance (Ω) +20°C/100KHz 0.060 0.035 0.060 0.035 0.033 0.060 0.035 0.033 0.060 0.035 0.035 0.033 0.060 0.060 0.035 0.035 0.120 0.120 0.073 0.073 0.073 0.073 0.160 0.160 0.082 0.080 0.320 0.320 0.320 0.170 0.153 0.320 0.320 0.170 0.170 0.153 0.153 Load Life Hours @ +105°C 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 PART NUMBER SYSTEM NACKA 102 M 35V 16x17 TR 13 WT F RoHS Compliant Terminations (100% Sn) Optional WT = Wide Terminal 330mm (13”) Reel Tape & Reel Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Series 64 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Surface Mount Aluminum Electrolytic Capacitors NACKA Series DIMENSIONS (mm) Case Size Dφ ±0.5 12.5 x 14 12.5 16 x 17 16.0 18 x 17 18.0 12.5 x 14WT 12.5 16 x 17WT 16.0 18 x 17WT 18.0 L max. 14.0 17.0 17.0 14.3 17.3 17.3 A, B ± 0.2 13.5 17.0 19.0 13.5 17.0 19.0 H max. 15.0 19.0 21.0 15.0 19.0 21.0 I ± 0.3 4.7 5.5 6.7 4.7 5.5 6.7 P ± 0.3 4.4 6.7 6.7 4.4 6.7 6.7 W 0.90 ± 0.30 1.20 ± 0.30 1.20 ± 0.30 1.20 ± 0.30 1.40 ± 0.20 1.40 ± 0.20 R 2.2 ± 0.2 3.0 ± 0.2 3.0 ± 0.2 S 7.1 ± 0.2 9.0 ± 0.2 11.0 ± 0.2 T 2.4 ± 0.2 1.9 ± 0.2 1.9 ± 0.2 Pressure Relief Vent STANDARD Anti-Vibration Skirt on WT Style + Dφ I I WT STYLE - + W - I I W A A L T R P B H Termination deflection: Standard = ±0.30mm WT = -0.1mm ~ +0.15mm R S P B LAND PATTERN DIMENSIONS (mm) Case Size 12.5x14 16x17 18x17 12.5x14WT 16x17WT 18x17WT A 4.0 6.0 6.0 3.9 5.8 5.8 B 5.7 6.5 7.5 6.0 6.8 7.3 C 2.0 2.5 2.5 6.9 6.2 6.2 D 2.8 3.6 3.6 E 1.3 1.3 1.8 F 1.9 1.9 1.9 G 2.2 1.7 1.7 H 2.5 2.8 2.8 STANDARD TERMINATION WT STYLE TERMINATION Solder Pads + F Solder Pads D E - - G H C G + B A B B A B Review & Compare Reflow Soldering Heat Limits V-chip SMT Aluminum Electrolytic Capacitors www.niccomp.com/RSL NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 65 Surface Mount Aluminum Electrolytic Capacitors NACKA Series PEAK REFLOW TEMPERATURE AND DURATION Rated Voltage 6.3V~35V 50V~63V 80V~100V Diameter φ12.5~18 Time above 217°C 90 sec. max. 30 sec. max. 30 sec. max. Time above 240°C 30 sec. max. 5 sec. max. 5 sec. max. Peak Temperature 245°C max. 245°C max. 245°C max. Max. Number of Reflow Passes 2* 2* 1 Temperature - Deg. C *Second reflow shall be at least one hour after natural cool to room temperature. Note: VPS Soldering is not recommended Peak Temperature (5 sec. max.) 230 200 Time Above 217°C (see table) 150 100 Preheat - 120 seconds max. (160°C) 50 Time (Seconds) TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 3. Connection: Maximum 3 connections (slices) per reel. P ±0.1 24.0 28.0 32.0 T ±0.2 14.5 17.5 17.5 t ±0.1 0.5 0.5 0.5 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 1.75 ± - t D F ±0.1 14.2 20.2 20.2 S 12.5x14 16x17 18x17 C ±0.3 32.0 44.0 44.0 C Case Size B ±0.5 14.0 17.5 19.5 B 4 + 0.1 A ±0.5 14.0 17.5 19.5 + A REEL DIMENSIONS (mm) Case Size 12.5x14 16x17 18x17 W ±1.0 34 46 46 Qty per Reel 13" (330mm) 200 125 125 P Feeding T 2mm ± 0.5mm φ50mm min. φ13mm ± 0.5mm φ21mm ± 0.8mm 3mm φ330mm ± 2.0mm W 66 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com