LM7905, LM7912, LM7915 www.ti.com SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 LM79XX Series 3-Terminal Negative Regulators Check for Samples: LM7905, LM7912, LM7915 FEATURES 1 • 2 • • • Thermal, Short Circuit and Safe Area Protection High Ripple Rejection 1.5A Output Current 4% Tolerance on Preset Output Voltage space DESCRIPTION The LM79XX series of 3-terminal regulators is available with fixed output voltages of −5V, −12V, and −15V. These devices need only one external component—a compensation capacitor at the output. The LM79XX series is packaged in the TO-220 power package and is capable of supplying 1.5A of output current. Connection Diagram Figure 1. TO-220 Package Front View See Package Number NDE0003B Typical Applications These regulators employ internal current limiting safe area protection and thermal shutdown for protection against virtually all overload conditions. Low ground pin current of the LM79XX series allows output voltage to be easily boosted above the preset value with a resistor divider. The low quiescent current drain of these devices with a specified maximum change with line and load ensures good regulation in the voltage boosted mode. For applications requiring other voltages, see LM137 datasheet. *Required if regulator is separated from filter capacitor by more than 3″. For value given, capacitor must be solid tantalum. 25μF aluminum electrolytic may be substituted. †Required for stability. For value given, capacitor must be solid tantalum. 25μF aluminum electrolytic may be substituted. Values given may be increased without limit. For output capacitance in excess of 100μF, a high current diode from input to output (1N4001, etc.) will protect the regulator from momentary input shorts. Figure 2. Fixed Regulator 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1999–2013, Texas Instruments Incorporated LM7905, LM7912, LM7915 SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ABSOLUTE MAXIMUM RATINGS (1) Input Voltage (Vo = −5V) −25V (Vo = −12V and −15V) −35V Input-Output Differential (Vo = −5V) 25V (Vo = −12V and −15V) Power Dissipation 30V (2) Internally Limited Operating Junction Temperature Range 0°C to +125°C −65°C to +150°C Storage Temperature Range Lead Temperature (Soldering, 10 sec.) (1) (2) 230°C Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not ensure Specific Performance limits. For ensured specifications and test conditions, see the Electrical Characteristics. Refer to DESIGN CONSIDERATIONS for details. ELECTRICAL CHARACTERISTICS Conditions unless otherwise noted: IOUT = 500mA, CIN = 2.2μF, COUT = 1μF, 0°C ≤ TJ ≤ +125°C, Power Dissipation ≤ 1.5W. Part Number LM7905C Output Voltage −5V −10V Input Voltage (unless otherwise specified) Symbol VO Parameter Output Voltage Conditions Min Typ Max TJ = 25°C −4.8 −5.0 −5.2 V 5mA ≤ IOUT ≤ 1A, −4.75 −5.25 V 50 mV 15 mV P ≤ 15W ΔVO Line Regulation Units TJ = 25°C, (−20 ≤ VIN ≤ −7) (1) 8 V (−25 ≤ VIN ≤ −7) 2 V (−12 ≤ VIN ≤ −8) ΔVO Load Regulation TJ = 25°C, 5mA ≤ IOUT ≤ 1.5A 15 100 mV 250mA ≤ IOUT ≤ 750mA 5 50 mV 1 2 mA 0.5 mA 0.5 mA IQ Quiescent Current TJ = 25°C ΔIQ Quiescent Current With Line (−25 ≤ VIN ≤ −7) Change With Load, 5mA ≤ IOUT ≤ 1A Vn IOMAX V (1) Output Noise Voltage TA = 25°C, 10Hz ≤ f ≤ 100Hz Ripple Rejection f = 120Hz 54 V 125 μV 66 dB (−18 ≤ VIN ≤ −8) V V Dropout Voltage TJ = 25°C, IOUT = 1A 1.1 Peak Output Current TJ = 25°C 2.2 A Average Temperature IOUT = 5mA, 0.4 mV/°C Coefficient of 0 C ≤ TJ ≤ 100°C Output Voltage (1) 2 Regulation is measured at a constant junction temperature by pulse testing with a low duty cycle. Changes in output voltage due to heating effects must be taken into account. Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 LM7905, LM7912, LM7915 www.ti.com SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS Conditions unless otherwise noted: IOUT = 500mA, CIN = 2.2μF, COUT = 1μF, 0°C ≤ TJ ≤ +125°C, Power Dissipation ≤ 1.5W. Part Number LM7912C LM7915C Output Voltage −12V −15V Input Voltage (unless otherwise specified) −19V Symbol VO Parameter Output Voltage Conditions ΔVO Line Regulation Load Regulation Typ Max Min Typ Max TJ = 25°C −11.5 −12.0 −12.5 −14.4 −15.0 −15.6 V 5mA ≤ IOUT ≤ 1A, −11.4 −12.6 −14.25 −15.75 V TJ = 25°C, (−27 ≤ VIN ≤ −14.5) (−30 ≤ VIN ≤ −17.5) V 5 5 mV (1) 100 (−30 ≤ VIN ≤ −14.5) (−30 ≤ VIN≤ −17.5) V 3 3 mV 30 50 (−26 ≤ VIN ≤−20) V 5mA ≤ IOUT ≤ 1.5A 15 200 15 200 mV 250mA ≤ IOUT ≤ 750mA 5 75 5 75 mV 1.5 3 1.5 3 mA 0.5 mA TJ = 25°C, Quiescent Current TJ = 25°C ΔIQ Quiescent Current With Line (1) 0.5 (−30 ≤ VIN ≤ −14.5) Change With Load, 5mA ≤ IOUT ≤ 1A IOMAX 80 (−22 ≤ VIN ≤ −16) IQ Vn −23V Min P ≤ 15W ΔVO Units Output Noise Voltage TA = 25°C, 10Hz ≤ f ≤ 100Hz Ripple Rejection f = 120 Hz (−30 ≤VIN ≤ −17.5) 0.5 0.5 V mA 375 μV 70 dB (−25 ≤ VIN ≤ −15) (−30 ≤ VIN≤ −17.5) V V 300 54 70 54 Dropout Voltage TJ = 25°C, IOUT = 1A 1.1 1.1 Peak Output Current TJ = 25°C 2.2 2.2 A Average Temperature IOUT = 5mA, −0.8 −1.0 mV/°C Coefficient of 0 C ≤ TJ ≤ 100°C Output Voltage (1) Regulation is measured at a constant junction temperature by pulse testing with a low duty cycle. Changes in output voltage due to heating effects must be taken into account. Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 Submit Documentation Feedback 3 LM7905, LM7912, LM7915 SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 www.ti.com DESIGN CONSIDERATIONS The LM79XX fixed voltage regulator series has thermal overload protection from excessive power dissipation, internal short circuit protection which limits the circuit's maximum current, and output transistor safe-area compensation for reducing the output current as the voltage across the pass transistor is increased. Although the internal power dissipation is limited, the junction temperature must be kept below the maximum specified temperature (125°C) in order to meet data sheet specifications. To calculate the maximum junction temperature or heat sink required, the following thermal resistance values should be used: Package TO-220 Typ Max Typ θJC θJC θJA Max θJA °C/W °C/W °C/W °C/W 3.0 5.0 60 40 (1) Solving for TJ: TJ = TA + PD (θJC + θCA) or = TA + PDθJA (without heat sink) where • • • • • • • • TJ = Junction Temperature TA = Ambient Temperature PD = Power Dissipation θJA = Junction-to-Ambient Thermal Resistance θJC = Junction-to-Case Thermal Resistance θCA = Case-to-Ambient Thermal Resistance θCS = Case-to-Heat Sink Thermal Resistance θSA = Heat Sink-to-Ambient Thermal Resistance Typical Applications Bypass capacitors are necessary for stable operation of the LM79XX series of regulators over the input voltage and output current ranges. Output bypass capacitors will improve the transient response by the regulator. The bypass capacitors, (2.2μF on the input, 1.0μF on the output) should be ceramic or solid tantalum which have good high frequency characteristics. If aluminum electrolytics are used, their values should be 10μF or larger. The bypass capacitors should be mounted with the shortest leads, and if possible, directly across the regulator terminals. 4 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 LM7905, LM7912, LM7915 www.ti.com SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 Load and line regulation < 0.01% temperature stability ≤ 0.2% †Determine Zener current ††Solid tantalum *Select resistors to set output voltage. 2 ppm/°C tracking suggested Figure 3. High Stability 1 Amp Regulator Figure 4. Current Source *Lamp brightness increase until iI= iQ (≈ 1 mA) + 5V/R1. †Necessary only if raw supply filter capacitor is more that 2″ from LM7905CT Figure 5. Light Controller Using Silicon Photo Cell Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 Submit Documentation Feedback 5 LM7905, LM7912, LM7915 SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 www.ti.com *Lamp brightness increases until ii = 5V/R1 (Ii can be set as low as 1 μA) †Necessary only if raw supply filter capacitor is more that 2″ from LM7905 Figure 6. High-Sensitivity Light Controller *Improves transient response and ripple rejection. Do not increase beyond 50 μF. Select R2 as follows: LM7905CT 300Ω LM7912CT 750Ω LM7915CT 1k Figure 7. Variable Output 6 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 LM7905, LM7912, LM7915 www.ti.com SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 (-15) (+15) Load Regulation at ΔIL = 1A 40mV 2mV Output Ripple, CIN = 3000µF, IL = 1A 100 µVms 100 µVms Temperature Stability 50mV 50mV Output Noise 10Hz ≤ f ≤ 10kHz 150 µVms 150 µVms *Resistor tolerance of R4 and R5 determine matching of (+) and (−) outputs. **Necessary only if raw supply filter capacitors are more than 3″ from regulators. Figure 8. ±15V, 1 Amp Tracking Regulators Figure 9. Dual Trimmed Supply Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 Submit Documentation Feedback 7 LM7905, LM7912, LM7915 SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 www.ti.com Schematic Diagrams Figure 10. −5V Figure 11. −12V and −15V 8 Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 LM7905, LM7912, LM7915 www.ti.com SNOSBQ7C – JUNE 1999 – REVISED MAY 2013 REVISION HISTORY Changes from Revision B (May 2013) to Revision C • Page Changed layout of National Data Sheet to TI format. ........................................................................................................... 8 Copyright © 1999–2013, Texas Instruments Incorporated Product Folder Links: LM7905 LM7912 LM7915 Submit Documentation Feedback 9 PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (°C) Device Marking (4/5) LM7905CT NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LM7905CT LM7905CT/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LM7905CT LM7912CT NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LM7912CT LM7912CT/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LM7912CT LM7915CT NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LM7915CT LM7915CT/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LM7915CT (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 1-Nov-2013 (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA NDE0003B www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated