AB102S THRU AB110S 1A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers ■ Features ■ Outline • Rating to 1000V PRV. • Ideal for printed circuit board. • Ideal for automated replacement. • Reliable low cost construction utilizing molded plastic technology results in inexpensive product. • Glass passivated chip junctions. • Ηigh temperature soldering guaranteed: ABS .010(0.25) .006(0.15) + .177(4.50) .252(6.4) .169(4.30) .236(6.0) 260 OC /10 seconds • Suffix "G" indicates Halogen-free part, ex.AB102SG. .006(0.15) .002(0.05) .161(4.1) .154(3.9) .028(0.7) .012(0.3) .200(5.1) .193(4.9) ■ Mechanical data .056(1.42) MAX • Epoxy:UL94-V0 rated flame retardant • Case : Molded plastic, ABS • Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity : Symbol molded on body .059(1.50) MAX .028(0.70) .024(0.60) Dimensions in inches and (millimeters) ■ Maximum ratings and electrical characteristics Rating at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Conditions Symbol O Average rectified output current on aluminum substrate at T A = 25 C Forward surge current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) V R = V RRM T A = 25 OC Reverse current V R = V RRM T A = 125 C t < 8.3ms, T J = 25 OC Thermal resistance junction to ambient MAX. UNIT IO 1.0 A I FSM 30 A Symbol Marking code Max. repetitive peak reverse voltage V RRM (V) Max. RMS voltage V RMS (V) Max. DC blocking voltage V R (V) AB102S ABS2 200 140 200 AB104S ABS4 400 280 400 AB106S ABS6 600 420 600 AB108S ABS8 800 560 800 AB110S ABS10 1000 700 1000 1 uA 500 I 2t 3.7 R θJA 62.5 T STG Storage temperature TYP. 10 IR O Current squared time MIN. -55 +150 A 2S O C/W O C Max. forward voltage @0.4A, T A = 25 OC V F (V) Operating temperature T J ( OC) 0.95 -55 ~ +150 Document ID : DS-22B16 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C AB102S THRU AB110S 1A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers ■ Rating and characteristic curves FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENTPER FIG.2-MAXIMUM FORWARD CURRENT DERATING CURVE 1.4 30 22.5 AVERAGE FORWARD CURRENT(A) PEAK FORWARD SURGE CURRENT(A) 1.6 37.5 8.3ms Single Half TJ=25OC Sine Wave 15 JEDEC method 7.5 0 1 5 50 10 1.2 1.0 on aluminum substrate 0.8 0.6 0.4 0.2 0 100 0 20 40 NUMBER OF CYCLES AT 60HZ 60 80 100 120 140 160 O AMBIENT TEMPERATURE( C) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT PER BRIDGE ELEMENT 6 100 o INSTANTANEOUS REVERSE CURRENT(uA) INSTANTANEOUS FORWARD CURRENT(A) TJ=150 C 1.0 0.1 o TA=25 C 10 1.0 o TJ=25 C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 0.01 1.4 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE(V) PERCENT OF RATED REVERSE VOLTAGE(%) 2 Document ID : DS-22B16 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C AB102S THRU AB110S 1A Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifiers ■ ABS foot print A D B C A B C D 0.024 (0.60) 0.024 (0.60) 0.132 (3.35) 0.193 (4.90) Dimensions in inches and (millimeters) ■ CITC reserves the right to make changes to this document and its products and specifications at any time without notice. ■ Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. ■ CITC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does CITC assume any liability for application assistance or customer product design. ■ CITC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. ■ No license is granted by implication or otherwise under any intellectual property rights of CITC. ■ CITC products are not authorized for use as critical components in life support devices or systems without express written approval of CITC. http://www.citcorp.com.tw/ Tel:886-3-5600628 Fax:886-3-5600636 Add:Rm. 3, 2F., No.32, Taiyuan St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) 3 Document ID : DS-22B16 Issued Date : 2010/05/05 Revised Date : 2012/05/31 Revision : C