Panasonic ECCT3G470JG High voltage ceramic capacitors for surface mounting 1 to 5 kvdc Datasheet

High Voltage Ceramic Capacitors (SMD)
High Voltage Ceramic Capacitors
For Surface Mounting
1 to 5 kVDC
■ Features
■ Recommended Application
● Resin molded SMD type for reflow solderings
● High reliability through use of disc capacitor element
● Wide rated voltage ranges from 1 kV to 5 kV, through a
disc element which withstand high voltage and outcurve
terminals
● Wide rated voltage range 1 to 5 kV
● Ballast circuit of LCD backlighting inverter
(For 3 to 5 kVDC Char.SL/GP)
● Snubber circuit of switching power supply
(For 1 to 2 kVDC Char.B/Y5P)
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
E
C
C
T
3
F
4
7
0
J
G
Product Code
Code
Class
ECC
Class1
ECK
Class2
Packaging Style
Code Style
T
Taped type
Rated Voltage
Code Rated Voltage
1 kVDC
3A
2 kVDC
3D
3 kVDC
3F
4 kVDC
3G
5 kVDC
3H
■ Construction
Nominal Capacitance
Ex.
Capacitance
100
10 pF
470
47 pF
101
100 pF
221
220 pF
Cap. Tolerance
Code
Tol.
D
±0.5 pF
J
±5 %
K
±10 %
M
±20 %
12
Temp. Char.
Code Temp. Char.
G
SL/GP
B
B/Y5P
Suffix
Code Style code
Nil
1
M
2
2
3
Y
4
■ Dimensions in mm (not to scale)
● style 1, 3
H
● Inside Terminal
Electrode
Molded Resin
S
S
E
W
L
Terminal
Ceramic Element
A
B
● Outside Terminal
● style 2, 4
This Figure applied to
Style Code 2, 4 (Add dim.L1)
L
Electrode
Molded Resin
L1
Symbol
Style 1
Ceramic Element
Terminal
Dim
(mm)
Style 2
Style 3
Style 4
L1
—
L
W
H
10.8±0.5 6.8±0.5 6.3±0.3 2.5±0.3
—
S
E
A
B
7.1±0.5 6.3±0.3 2.5±0.3 1.45±0.30 2.5±0.2 (2.0) (3.7)
—
2.5±0.2 (2.0) (3.7)
5.7±0.5 4.5±0.3 2.3max. 0.85±0.30 2.5±0.2 (1.7) (3.1)
9.4±0.3 5.5±0.5 4.5±0.3 2.3±0.2
—
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
2.5±0.2 (1.7) (3.1)
Dec. 2007
High Voltage Ceramic Capacitors (SMD)
■ Specifications
Characteristics
Operating Temperature Range
Rated Voltage
Dielectric
Withstanding Voltage
Capacitance
Q or Dissipation Factor
(tan δ)
Insulation Resistance
Temperature
Characteristics
Char. SL/GP
Char. B/Y5P
–25 to 105 °C
2 to 3 kVDC
4 to 5 kVDC
5 kVDC
1 to 2 kVDC
200 % of Rated Voltage 150 % of Rated Voltage 120 % of Rated Voltage 200 % of Rated Voltage
for 1 to 5 seconds
for 1 to 5 seconds
for 1 to 5 seconds
for 1 to 5 seconds
Within the specified tolerance, when measured Within the specified tolerance, when measured
at 1 MHz±20 %, 1 to 5 Vrms. and 20 °C
at 1 kHz±20 %, 1 to 5 Vrms. and 20 °C
30 pF or under Q > 400+20 C (C:Cap.pF)
tan δ < 0.025
over 30 pF
Q > 1000
at 1 kHz±20 %,1 to 5 Vrms. and 20 °C
at 1 MHz±20 %,1 to 5 Vrms. and 20 °C
10000 M 액 min. at 500 VDC and 1 minute electrification
Temperature Coefficient:
Max. Cap. Change:±10 %
+350 to –1000 ppm/ °C
(Temperature Range : –25 to 85 °C)
(Temperature Range : 20 to 85 °C)
■ Packaging Methods (Taping)
● Minimum Quantity/Packing Unit
Type
Packaging Style
1 to 5 kVDC
(style 1)
5 kVDC
(style 2)
4 kVDC
(style 3)
5 kVDC
(style 4)
Embossed Carrier
Taping
Embossed Carrier
Taping
Embossed Carrier
Taping
Embossed Carrier
Taping
Minimum Packing Packing Quantity Carton Dimensions
in Carton
Quantity
in mm L҂W҂H
Part Number
5 to 470 pF
2000
pcs./reel
6000 pcs.
350҂350҂62
5 to 27 pF
2000
pcs./reel
4000 pcs.
350҂350҂62
ECCT3G첸첸첸JG2
10 to 27 pF
3000
pcs./reel
9000 pcs.
350҂350҂62
ECCT3H첸첸첸첸첸Y
5 to 15 pF
3000
pcs./reel
6000 pcs.
350҂350҂62
EC첸T3첸첸첸첸첸첸
ECCT3H첸첸첸첸첸M
● Reel
● Embossed Carrier Taping
style 1, 3, 4
(W=12 mm)
Chip pocket
φD0
C
P2 P0
E
Feeding hole
t1
E
P1
Tape running
direction
B
B
F
W
A
D
r
t2
Chip component
style 2
Feeding hole
t1
t
Chip pocket
φD0
P2 P0
E
W
A
B
F
W
A
t2
Chip component
P1
Tape running
direction
Unit:(mm)
Unit:(mm)
Symbol
A
B
C
D
E
style 1, 3
Dim.
(mm)
style 2
style 4
330±5 60 min. 13.0±0.5 21.0±1.0 2.0±0.5
W
t
r
13.5±1.5
25.5±1.5 2.0±0.5 R1.0
17.5±1.5
P0 φD0 t1
t2
1.5
6.5 7.5 12.0 5.5 1.75 8.0 2.0 4.0 +0.1 0.3 3.2
style1 ±0.2
±0.2 ±0.3 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1
±0.1 ±0.3
Symbol
A
B
W
F
E
P1
P2
–0
Dim.
(mm)
1.5 0.3 3.2
6.65 11.2 24.0 11.5 1.75 12.0 2.0 4.0 +0.1
style2 ±0.20
±0.2 ±0.3 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1
±0.1 ±0.3
–0
1.5 0.3 2.8
4.8 6.0 12.0 5.5 1.75 8.0 2.0 4.0 +0.1
style3 ±0.2
±0.2 ±0.3 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1
±0.1 ±0.3
–0
1.5 0.3 2.85
4.7 10.0 16.0 7.5 1.75 8.0 2.0 4.0 +0.1
style4 ±0.2
±0.5 ±0.3 ±0.1 ±0.10 ±0.1 ±0.1 ±0.1 –0
±0.1 ±0.30
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Dec. 2007
High Voltage Ceramic Capacitors (SMD)
● Leader Part and Taped End
Not loaded
40 mm min.
Chip component position
Not loaded
20 mm min.
Leader tape
400 mm min.
■ Ratings and Characteristics
● Rated Voltage 1 to 5 kVDC
Rated Voltage
5 kVDC
4 kVDC
3 kVDC
2 kVDC
1 kVDC
Part Number
Capacitance (pF)
Cap. Tolerance (%)
Temp. Char
ECCT3H050DGM
ECCT3H100JGM
ECCT3H120JGM
ECCT3H150JGM
ECCT3H180JGM
ECCT3H220JGM
ECCT3H270JGM
ECCT3H050DGY
ECCT3H080DGY
ECCT3H100JGY
ECCT3H120JGY
ECCT3H150JGY
ECCT3G100DG2
ECCT3G120JG2
ECCT3G150JG2
ECCT3G180JG2
ECCT3G220JG2
ECCT3G270JG2
ECCT3G330JG
ECCT3G390JG
ECCT3G470JG
ECCT3F100DG2
ECCT3F120JG2
ECCT3F150JG2
ECCT3F180JG2
ECCT3F220JG2
ECCT3F270JG2
ECCT3F330JG2
ECCT3F390JG
ECCT3F470JG
ECCT3F560JG
ECCT3D680JG
ECKT3D101KB
ECKT3D121KB
ECKT3D151KB
ECKT3D181KB
ECKT3D221KB
ECKT3D271KB
ECKT3D331KB
ECKT3A391KB
ECKT3A471KB
5
10
12
15
18
22
27
5
8
10
12
15
10
12
15
18
22
27
33
39
47
10
12
15
18
22
27
33
39
47
56
68
100
120
150
180
220
270
330
390
470
±0.5 pF
±5
±5
±5
±5
±5
±5
±0.5 pF
±0.5 pF
±5
±5
±5
±0.5 pF
±5
±5
±5
±5
±5
±5
±5
±5
±0.5 pF
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±10
±10
±10
±10
±10
±10
±10
±10
±10
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
SL/GP
B/Y5P
B/Y5P
B/Y5P
B/Y5P
B/Y5P
B/Y5P
B/Y5P
B/Y5P
B/Y5P
Style
Style 2
Style 4
Style 3
Style 1
Style 3
Style 1
Notes ✽ This part number indicates taped type.
✽ Capacitance 9 pF or under is available by special order.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Sep. 2006
High Voltage Ceramic Capacitors (SMD)
■ Typical Characteristics
● Temperature Characteristics
Char. SL/GP
(
Capacitance Change (%)
Capacitance Change (%)
(Temp.Coeff.:+350 to –1000 ppm/°C)
+10
+5
0
–5
–10
–15
–20
0
20
40
60
Temperature (˚C)
80
100
Temp.Range:–25 to 85 °C
max.Cap.Change:±10 %
0
– 10
–20
0
20
40
60
Temperature (˚C)
Rated Voltage 4 kVDC
3000
3000
3000
2000
2000
2000
700
33pF
500
Voltage (Vp-p)
5000
1000
10pF
22pF
33pF
47pF
1000
700
500
47pF
500
300
300
200
200
10
20 30
200 300 500
50 70 100
Frequency (kHZ)
The graphs above show the maximum permissable voltage
when using a capacitor with an AC sine wave voltage.
When measuring this voltage in room temperature (25 °C), the
capacitor self-heat generation will rise a maximum of 20 °C.
When using a pulse voltage or an AC voltage other than a sine
wave, confirm that the capacitor self-heat generation is less
than 20 °C in an ambient room temperature of 25 °C.
The self-heat generation temperature is the difference between
the surface temperature and the ambient room temperature.
As for the situation when the self-heat generation temperature is
more than 25 °C, refer to the figure on the right.
10
20 30
200 300 500
50 70 100
Frequency (kHZ)
Permission self generation of heat temperature
vs. ambient temperature
25
Permission self generation
of heat temperature (˚C)
200 300 500
50 70 100
Frequency (kHZ)
10pF
22pF
700
200
20 30
100
1000
300
10
80
Rated Voltage 5 kVDC
5000
10pF
22pF
)
+10
5000
Voltage (Vp-p)
Voltage (Vp-p)
● Characteristics of Voltage-Frequency
Rated Voltage 3 kVDC
120
Char. B/Y5P
20
15
10
5
0
20
40
60
80
100
120
ambient temperature (˚C)
■ Application Examples
● LCD Backlighting Inverter
● Primary circuit and Snubber circuit of
Switching Power Supply
3 to 5 kV, 10 to 47 pF
1kV/2kV,100 to 470 pF
Type BC or Type FC 1000 to 4700 pF
Lamp
AC
In put
DC
Out put
2kV,100 to 330 pF
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Similar pages