AZ23-V-G-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes, Dual FEATURES • Dual silicon planar Zener diodes, common anode 1 2 • The Zener voltages are graded according to the international E 24 standard • The parameters are valid for both diodes in one case. VZ and Rzj of the two diodes in one case is 5 % 3 20456 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.7 to 51 V Test current IZT 5 mA VZ specification Pulse current Int. construction Dual Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY AZ23-V-G-series AZ23-V-G-series-18 10 000 (8 mm tape on 13" reel) 10 000 AZ23-V-G-series AZ23-V-G-series-08 3000 (8 mm tape on 7" reel) 15 000 PACKAGE PACKAGE NAME SOT-23 WEIGHT 8.1 mg MOLDING COMPOUND MOISTURE SENSITIVITY FLAMMABILITY RATING LEVEL UL 94 V-0 MSL level 1 (according J-STD-020) SOLDERING CONDITIONS 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation Device on fiberglass substrate, see layout on page 6 Ptot 300 mW Junction to ambient air Device on fiberglass substrate, see layout on page 6 RthJA 420 K/W Tj 150 °C Tstg - 65 to + 150 °C IZ Ptot/VZ mA Junction temperature Storage temperature range Zener current Rev. 1.2, 31-Aug-11 Document Number: 85867 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AZ23-V-G-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V IZT2 mA REVERSE VOLTAGE DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT OF ZENER VOLTAGE VR at IR ZZ at IZT1 ZZK at IZT2 VZ at IZT 10-4/°C V nA MIN. NOM. MAX. MAX. MAX. MIN. MAX. AZ23C2V7-V-G D41 2.5 2.7 2.9 5 1 MAX. - - 75 (< 83) < 500 -9 -4 AZ23C3V0-V-G D42 2.8 3.0 3.2 5 1 - - 80 (< 95) < 500 -9 -3 AZ23C3V3-V-G D43 3.1 3.3 3.5 5 1 - - 80 (< 95) < 500 -8 -3 AZ23C3V6-V-G D44 3.4 3.6 3.8 5 1 - - 80 (< 95) < 500 -8 -3 AZ23C3V9-V-G D45 3.7 3.9 4.1 5 1 - - 80 (< 95) < 500 -7 -3 AZ23C4V3-V-G D46 4 4.3 4.6 5 1 - - 80 (< 95) < 500 -6 -1 AZ23C4V7-V-G D47 4.4 4.7 5 5 1 - - 70 (< 78) < 500 -5 2 AZ23C5V1-V-G D48 4.8 5.1 5.4 5 1 > 0.8 100 30 (< 60) < 480 -3 4 AZ23C5V6-V-G D49 5.2 5.6 6 5 1 >1 100 10 (< 40) < 400 -2 6 7 AZ23C6V2-V-G D50 5.8 6.2 6.6 5 1 >2 100 4.8 (< 10) < 200 -1 AZ23C6V8-V-G D51 6.4 6.8 7.2 5 1 >3 100 4.5 (< 8) < 150 2 7 AZ23C7V5-V-G D52 7 7.5 7.9 5 1 >5 100 4 (< 7) < 50 -3 7 AZ23C8V2-V-G D53 7.7 8.2 8.7 5 1 >6 100 4.5 (< 7) < 50 4 7 AZ23C9V1-V-G D54 8.5 9.1 9.6 5 1 >7 100 4.8 (< 10) < 50 5 8 AZ23C10-V-G D55 9.4 10 10.6 5 1 > 7.5 100 5.2 (< 15) < 70 5 8 AZ23C11-V-G D56 10.4 11 11.6 5 1 > 8.5 100 6 (< 20) < 70 5 9 AZ23C12-V-G D57 11.4 12 12.7 5 1 >9 100 7 (< 20) < 90 6 9 AZ23C13-V-G D58 12.4 13 14.1 5 1 > 10 100 9 (< 25) < 110 7 9 AZ23C15-V-G D59 13.8 15 15.6 5 1 > 11 100 11 (< 30) < 110 7 9 AZ23C16-V-G D60 15.3 16 17.1 5 1 > 12 100 13 (< 40) < 170 8 9.5 AZ23C18-V-G D61 16.8 18 19.1 5 1 > 14 100 18 (< 50) < 170 8 9.5 AZ23C20-V-G D62 18.8 20 21.2 5 1 > 15 100 20 (< 50) < 220 8 10 AZ23C22-V-G D63 20.8 22 23.3 5 1 > 17 100 25 (< 55) < 220 8 10 AZ23C24-V-G D64 22.8 24 25.6 5 1 > 18 100 28 (< 80) < 220 8 10 AZ23C27-V-G D65 25.1 27 28.9 5 1 > 20 100 30 (< 80) < 250 8 10 AZ23C30-V-G D66 28 30 32 5 1 > 22.5 100 35 (< 80) < 250 8 10 AZ23C33-V-G D67 31 33 35 5 1 > 25 100 40 (< 80) < 250 8 10 AZ23C36-V-G D68 34 36 38 5 1 > 27 100 40 (< 90) < 250 8 10 AZ23C39-V-G D69 37 39 41 5 1 > 29 100 50 (< 90) < 300 10 12 AZ23C43-V-G D70 40 43 46 5 1 > 32 100 60 (< 100) < 700 10 12 AZ23C47-V-G D71 44 47 50 5 1 > 35 100 70 (< 100) < 750 10 12 AZ23C51-V-G D72 48 51 50 5 1 > 38 100 70 (< 100) < 750 10 12 Note (1) Tested with pulses t = 5 ms p Rev. 1.2, 31-Aug-11 Document Number: 85867 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AZ23-V-G-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V IZT2 mA REVERSE VOLTAGE DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT OF ZENER VOLTAGE VR at IR ZZ at IZT1 ZZK at IZT2 VZ at IZT 10-4/°C V nA MIN. NOM. MAX. MAX. MAX. MIN. MAX. AZ23B2V7-V-G D41 2.65 2.7 2.75 5 1 MAX. - - 75 (< 83) < 500 -9 -4 AZ23B3V0-V-G D42 2.94 3.0 3.06 5 1 - - 80 (< 95) < 500 -9 -3 AZ23B3V3-V-G D43 3.23 3.3 3.37 5 1 - - 80 (< 95) < 500 -8 -3 AZ23B3V6-V-G D44 3.53 3.6 3.67 5 1 - - 80 (< 95) < 500 -8 -3 AZ23B3V9-V-G D45 3.82 3.9 3.98 5 1 - - 80 (< 95) < 500 -7 -3 AZ23B4V3-V-G D46 4.21 4.3 4.39 5 1 - - 80 (< 95) < 500 -6 -1 AZ23B4V7-V-G D47 4.61 4.7 4.79 5 1 - - 70 (< 78) < 500 -5 2 AZ23B5V1-V-G D48 5 5.1 5.2 5 1 > 0.8 100 30 (< 60) < 480 -3 4 AZ23B5V6-V-G D49 5.49 5.6 5.71 5 1 >1 100 10 (< 40) < 400 -2 6 AZ23B6V2-V-G D50 6.08 6.2 6.32 5 1 >2 100 4.8 (< 10) < 200 -1 7 AZ23B6V8-V-G D51 6.66 6.8 6.94 5 1 >3 100 4.5 (< 8) < 150 2 7 AZ23B7V5-V-G D52 7.35 7.5 7.65 5 1 >5 100 4 (< 7) < 50 -3 7 AZ23B8V2-V-G D53 8.04 8.2 8.36 5 1 >6 100 4.5 (< 7) < 50 4 7 AZ23B9V1-V-G D54 8.92 9.1 9.28 5 1 >7 100 4.8 (< 10) < 50 5 8 AZ23B10-V-G D55 9.8 10 10.2 5 1 > 7.5 100 5.2 (< 15) < 70 5 8 AZ23B11-V-G D56 10.8 11 11.2 5 1 > 8.5 100 6 (< 20) < 70 5 9 AZ23B12-V-G D57 11.8 12 12.2 5 1 >9 100 7 (< 20) < 90 6 9 AZ23B13-V-G D58 12.7 13 13.3 5 1 > 10 100 9 (< 25) < 110 7 9 AZ23B15-V-G D59 14.7 15 15.3 5 1 > 11 100 11 (< 30) < 110 7 9 AZ23B16-V-G D60 15.7 16 16.3 5 1 > 12 100 13 (< 40) < 170 8 0.5 AZ23B18-V-G D61 17.6 18 18.4 5 1 > 14 100 18 (< 50) < 170 8 0.5 AZ23B20-V-G D62 19.6 20 20.4 5 1 > 15 100 20 (< 50) < 220 8 10 AZ23B22-V-G D63 21.6 22 22.4 5 1 > 17 100 25 (< 55) < 220 8 10 AZ23B24-V-G D64 23.5 24 24.5 5 1 > 18 100 28 (< 80) < 220 8 10 AZ23B27-V-G D65 26.5 27 27.5 5 1 > 20 100 30 (< 80) < 250 8 10 AZ23B30-V-G D66 29.4 30 30.6 5 1 > 22.5 100 35 (< 80) < 250 8 10 AZ23B33-V-G D67 32.3 33 33.7 5 1 > 25 100 40 (< 80) < 250 8 10 AZ23B36-V-G D68 35.3 36 36.7 5 1 > 27 100 40 (< 90) < 250 8 10 AZ23B39-V-G D69 38.2 39 39.8 5 1 > 29 100 50 (< 90) < 300 10 12 AZ23B43-V-G D70 42.1 43 43.9 5 1 > 32 100 60 (< 100) < 700 10 12 AZ23B47-V-G D71 46.1 47 47.9 5 1 > 35 100 70 (< 100) < 750 10 12 AZ23B51-V-G D72 50 51 52 5 1 > 38 100 70 (< 100) < 750 10 12 Note (1) Tested with pulses t = 5 ms p Rev. 1.2, 31-Aug-11 Document Number: 85867 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AZ23-V-G-Series www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) IF mA 103 Ω 103 102 5 4 3 2 10 Rzth TJ = 100 °C 1 Rzth = RthA x VZ x Δ VZ ΔTj 102 10-1 5 4 3 TJ = 25 °C 2 10-2 10 10-3 5 4 3 10-4 10 negative 2 -5 positive 1 0 0.2 0.4 0.6 0.8 1V 1 VF 18114 2 3 4 5 10 18121 Fig. 1 - Forward Characteristics 2 3 4 5 100 V VZ at IZ = 5 mA Fig. 4 - Thermal Differential Resistance vs. Zener Voltage Ω 100 mW 500 7 5 4 400 Rzj Ptot 3 2 300 10 7 200 5 4 3 100 2 0 0 100 1 200 °C 5 4 3 2 4 5 10 2 Δ VZ ΔTj 47 + 51 43 39 36 102 3 4 5 100 V VZ mV/°C 25 Tj = 25 °C 7 3 Fig. 5 - Dynamic Resistance vs. Zener Voltage Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature Ω 103 2 18122 Tamb 18115 Rzj Tj = 25 °C IZ = 5 mA 1 20 5 mA IZ = 1 mA 20 mA 15 10 7 5 4 3 5 2 0 10 0.1 18120 -5 2 3 4 5 1 2 IZ 3 4 5 10 mA Fig. 3 - Dynamic Resistance vs. Zener Current Rev. 1.2, 31-Aug-11 1 18123 2 3 4 5 10 2 3 4 5 100 V VZ Fig. 6 - Temperature Dependence of Zener Voltage vs. Zener Voltage Document Number: 85867 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AZ23-V-G-Series www.vishay.com Vishay Semiconductors V 0.8 V 1.6 25 0.7 15 VZ at IZ = 5 mA 0.6 Δ VZ 1.2 Δ VZ 0.5 8 0.4 0.2 6.2 5.9 0.1 5.6 0 1 0.8 7 0.3 0.6 0.4 0.2 0 5.1 -1 0 20 40 60 80 100 120 140 C 18124 - 0.2 4.7 3.6 - 0.2 ΔVZ = Rzth x IZ 1.4 10 - 0.4 18127 1 10 4 5 2 100 V 3 4 5 Fig. 10 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage mV/°C 100 V 5 ΔVZ = Rzth x IZ IZ = 5 mA 4 80 Δ VZ 60 3 40 2 20 1 0 IZ = 5 mA IZ = 2 mA 0 0 20 40 60 80 0 100 V VZ 18125 20 40 mA 50 8 7 Tj = 25 °C 6.8 3.3 4.7 40 5 3.9 5.6 2.7 lZ 51 43 100 V 80 Fig. 11 - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage V 9 6 60 VZ 18128 Fig. 8 - Temperature Dependence of Zener Voltage vs. Zener Voltage Δ VZ 3 VZ at IZ = 5 mA Fig. 7 - Change of Zener Voltage vs. Junction Temperature Δ VZ ΔTj 2 Tj 8.2 30 4 36 3 20 2 1 Test current IZ 5 mA 10 0 IZ = 2 mA -1 0 20 18126 40 60 80 100 120 Tj 140 °C Fig. 9 - Change of Zener Voltage vs. Junction Temperature Rev. 1.2, 31-Aug-11 0 0 18111 1 2 3 4 5 6 7 8 9 10 V VZ Fig. 12 - Breakdown Characteristics Document Number: 85867 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AZ23-V-G-Series www.vishay.com mA 30 Vishay Semiconductors mA 10 10 12 Tj = 25 °C Tj = 25 °C 8 lZ lZ 15 20 18 Test current IZ 5 mA 6 39 51 43 47 22 4 27 Test 10 current IZ 5 mA 33 36 2 0 0 0 10 20 18112 40 V 30 0 VZ 10 20 30 40 50 60 70 80 90 100 V VZ 18113 Fig. 13 - Breakdown Characteristics Fig. 14 - Breakdown Characteristics LAYOUT FOR RthJA TEST Thickness: fiberglass 0.059" (1.5 mm) Copper leads 0.012" (0.3 mm) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) Rev. 1.2, 31-Aug-11 17451 Document Number: 85867 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AZ23-V-G-Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.2, 31-Aug-11 Document Number: 85867 7 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000