Clamshell GHz Socket - Direct mount, solderless Features 39.2250 • Directly mounts to target PCB (needs tooling holes) with hardware • High speed, reliable Elastomer connection • Minimum real estate required • Compression plate distributes forces evenly • Ball guide prevents over compression of elastomer • Clamshell lid A 32.60 A Recommended torque = 1 in lbs 46.05 13.46 0.81 3.84 2.80 1.86 8.41 8.41 SECTION A-A 31.71 22.4000 37.32 Description: CG-BGA 14x14mm 1mm pitch 13x13 array BGA168 custom footprint Primary dimension units are millimeters, Secondary dimension units are [inches]. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CG-BGA-4020 Specification Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: N/A Weight: 69.63 STATUS: Released SHEET: 1 OF 4 DRAWN BY: M. Raske SCALE: 1.4:1 FILE: CG-BGA-4020 Dwg DATE: 05/09/2014 REV. A 5.30 A1 location on socket 6.50 5.50 6.66 *Note: BGA pattern is not symmetrical with respect to the mounting holes. 1.71±0.01 (x4) Non plated mounting hole 16.30 0.85±0.05 (x2) Non plated alignment hole 11.50 Orientation mark on backing plate 9.20 5.50 4.50 32.600±0.125 socket lid size 0.00 23.495±0.125 Socket base size 6.50 6.50 9.20 11.50 Target PCB Recommendations Total thickness: 1.6mm min. Plating: Gold or Solder finish PCB Pad height: Same or higher than solder mask 11.20 9.20 4.12 5.50 0.00 6.50 9.20 11.20 16.30 23.495±0.125 No component area Max Component Ht. 13.46mm 39.225±0.125 Socket lid size Max Component Ht. 1.86mm Max Component Ht. 0.81mm Description: Recommended PCB Layout Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CG-BGA-4020 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: N/A Weight: 69.63 STATUS: Released SHEET: 2 OF 4 REV. A ENG: S. Huang DRAWN BY: M. Raske SCALE: 3:1 FILE: CG-BGA-4020 Dwg DATE: 05/09/2014 Ironwood package code: BGA168K Pin 1 marking D X Pin 1 No ball 0.15 Z e E E1 b Y 0.15 M 0.08 M TOP VIEW Z X Y Z D1 BOTTOM VIEW 0.15 Z DIM A2 A A1 0.1 Z Z SIDE VIEW NOM A 1.56 A1 0.508 D 14.00 D1 12.00 E 14.00 E1 12.00 b 0.60 e 1.00 Array: 13x13 1. 2. 3. 4. 5. Dimensions are in millimeters. Interpret dimensions and tolerances per ASME Y14.5-1994. Dimension b is measured at the maximum solder ball diameter, parallel to datum plane Z. Datum Z (seating plane) is defined by the spherical crowns of the solder balls. Parallelism measurement shall exclude any effect of mark on top surface of package. Description: Compatible BGA Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CG-BGA-4020 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: N/A Weight: 69.63 STATUS: Released SHEET: 3 OF 4 REV. A ENG: S. Huang DRAWN BY: M. Raske SCALE: 3:1 FILE: CG-BGA-4020 Dwg DATE: 05/09/2014 4 15 13 12 2 3 9 6 16 8 5 7 10 11 DESCRIPTION Custom socket base 14mm IC Material 7075-T6 Aluminum Alloy 2 Clam shell lid for 17mm IC 7075-T6 Aluminum Alloy 3 Custom compression plate for 14mm IC 7075-T6 Alumium Alloy 4 M10 Comression Screw 7075-T6 Aluminum Alloy 5 Clamshell Latch 7075-T6 Aluminum Alloy 6 Ball Guide 13x13 array 1mm pitch custom footprint Kapton Polyimide/Cirlex 7 Elastomer Guide custom footprint Ultem 1000 0.5mm thick, 0.05x 0.05mm pitch, 50mm sqr, Z-axis conductive angled elastomer 20 Micron dia gold plated brass filaments arranged symettrically in a silicon rubber (63.5 degree angle), Thickness: 0.5mm 9 Customer's BGA device FR4 High temp 10 Test PCB 14x14mm 13x13 array 1mm pitch custom footprint Material <not specified> 11 Custom Clamshell Backing Plate 7075-T6 Aluminum Alloy 12 Precision Compression Spring, Zinc-Plated Music Wire, 1/2" Length, .12" OD, .016" Wire Zinc Plated Music Wire 13 Spring Clamshell lid assembly Steel Music Wire 14 Hinge Pin and Snap Ring, 3mm OD, 25mm long, SS Stainless Steel (ferritic) 15 Screw, M3 x 12mm, Low Head Cap, SS 18-8 Stainless Steel 16 Chrome Stainless Steel 17 Dowel Pin, 1/32" x 3/16", SS #0-80 X .375 LG, SOC HD CAP SCREW, ALLOY STL, BLK OXIDE 18 Insulating washer, 4mm OD. Kapton Polyimide/Cirlex 19 Insulating disk, 2mm OD with 2 mil thk Adesive Kapton Polyimide/Cirlex 8 14 1 ITEM NO. 1 Orientation mark 3.620 Alloy Steel 1.71 (x4) 18 17 22.400 (x4) 18.40±0.05 3.620 2.65 2.50 2.00 (x3) 5.00 4.00 (x4) Description: Skt and Backing plate Detail Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams. Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. CG-BGA-4020 Drawing Ironwood Electronics, Inc. Tele: (800) 404-0204 www.ironwoodelectronics.com Material: Material <not specified> Finish: N/A Weight: 69.63 Backing Plate Top View STATUS: Released Backing Plate Side View SHEET: 4 OF 4 REV. A ENG: S. Huang DRAWN BY: M. Raske SCALE: 1.8:1 FILE: CG-BGA-4020 Dwg DATE: 05/09/2014