For more information, please visit the product page. date 05/07/2012 page 1 of 3 MODEL: CPM-2F │ DESCRIPTION: 6.0 A PELTIER UNIT FEATURES • better seal structure for water resistance and absorbtion of thermal stress • easy installation • no screws to tighten result in better heat absorbtion and maximum performance RoHS MODEL CPM-2F Notes: input voltage1 input current output Qmax2 output ∆Tmax2 max (V) max (A) Th=50°C (W) Th=50°C (°C) 12 6 46 73 1. at inverse voltage, "cold side plate" becomes hot side plate 2. maximum cooling capacity at Imax, Vmax, and ∆T=0°C 3. maximum temperature difference at Imax, Vmax, and Q=0W (maximum parameters are measured in a vacuum) GENERAL parameter conditions/description min typ max units internal resistance 1.85 2.35 Ω cold side plate -20 60 °C max units 1,200 Vac 4 Notes: 4. measured by AC 4-terminal method at 25°C SAFETY & COMPLIANCE parameter conditions/description isolation voltage for 1 second insulation resistance input to output at 250 Vdc RoHS compliant yes min typ 10 MΩ ENVIRONMENTAL parameter conditions/description min operating temperature typ max units 0 35 °C storage temperature -20 70 °C operating humidity 30 85 % storage humidity 10 90 % For further information and product selection refer to peltier applicaftion notes.pdf cui.com For more information, please visit the product page. CUI Inc │ MODEL: CPM-2F │ DESCRIPTION: 6.0 A PELTIER UNIT date 05/07/2012 │ page 2 of 3 CPM-2F PERFORMANCE (Th=50°C) Voltage Input (V) 6A 16.0 5A 4A 3A 8.0 2A 1A 0 6A Heat Pumped (W) 40.0 5A 4A 30.0 3A 2A 20.0 10.0 1A 0 ΔＴ＝Ｔｈ−Ｔｃ（℃） MECHANICAL parameter conditions/description min weight typ 200 cooling medium aluminum heat radiation medum aluminum MECHANICAL DRAWING units: mm tolerance: ±0.3 mm 55.0 2.165 51.0 2.008 44.5 1.752 COOLING SURFACE 8.5 0.335 VENDOR: JST PART NO: VHR-2N 27.0 1.063 RADIATING SURFACE 6.0 0.236 6.0 0.236 70.0 2.756 4.3 0.169 (4 PLCS) 32.0 1.260 0.2 (2 PLCS) 385.0 (15.16) +20.0 -10.0 60.0 2.362 0.2 (2 PLCS) M4X7 (4 PLCS) cui.com max units g For more information, please visit the product page. CUI Inc │ MODEL: CPM-2F │ DESCRIPTION: 6.0 A PELTIER UNIT date 05/07/2012 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 07/09/2008 1.01 applied new template 05/07/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.