Coilcraft ML338PWA501MLZ High-reliability power inductor Datasheet

2010 POWER INDUCTORS
High-Reliability Power Inductors ML338PWA
■ High temperature materials allow operation in ambient
temperatures up to 155°C
■ Very low DCR and excellent current handling.
■ Soft saturation makes them ideal for VRM/VRD applications.
■ Special construction allows it to pass vibration testing to
30 G and shock testing to 500 G.
Weight 20 mg
Terminations RoHS compliant tin-silver-copper over tin over nickel
over silver.
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55°C to +155°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 1000/7″reel
Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing,
1.19 mm pocket depth
DCR (Ohms)3 SRF (MHz)4
Inductance2
Part number1
±20% (µH)
nom max
min typ
10% drop
ML338PWA201MLZ
0.20
0.024
0.027
286
408
2.80
ML338PWA331MLZ
0.33
0.031
0.035
216
309
1.90
ML338PWA501MLZ
0.50
0.040
0.045
153
218
1.80
ML338PWA681MLZ
0.68
0.057
0.063
106
152
1.55
ML338PWA821MLZ
0.82
0.068
0.075
93
132
1.25
ML338PWA102MLZ
1.0
0.081
0.089
82
117
1.20
ML338PWA152MLZ
1.5
0.105
0.116
56
80
0.950
ML338PWA222MLZ
2.2
0.156
0.173
53
75
0.940
ML338PWA332MLZ
3.3
0.207
0.228
39
55
0.700
ML338PWA472MLZ
4.7
0.336
0.370
28
40
0.580
ML338PWA682MLZ
6.8
0.421
0.463
23
33
0.450
ML338PWA822MLZ
8.2
0.457
0.503
21
30
0.440
ML338PWA103MLZ
10
0.555
0.611
20
28
0.390
1. When ordering, please specify testing code:
2.
3.
4.
5.
Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
DCR measured on a micro-ohmmeter.
SRF measured using Agilent/HP 4395A or equivalent.
DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise fron 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
ML338PWA224MLZ
Testing: Z = COTS
H = Screening per Coilcraft CP-SA-10001
N = Screening per Coilcraft CP-SA-10004
®
Specifications subject to change without notice.
Please check our website for latest information.
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2012
Isat (A)5
Irms (A)6
20% drop 30% drop
20°C rise 40°C rise
3.45
3.75
2.2
2.8
2.75
3.05
1.9
2.6
2.35
2.64
1.7
2.3
1.95
2.19
1.5
2.1
1.65
1.90
1.3
1.7
1.60
1.80
1.1
1.6
1.30
1.50
1.0
1.4
1.20
1.35
0.96
1.3
0.925
1.05
0.79
1.1
0.750
0.845
0.74
1.0
0.620
0.725
0.64
0.87
0.600
0.670
0.55
0.75
0.525
0.610
0.49
0.66
Document ML646-1
Phone 800-981-0363
Fax 847-639-1508
Revised 06/28/12
E-mail [email protected]
Web www.coilcraft-cps.com
2010 POWER INDUCTORS
ML338PWA Series
Typical L vs Current
Typical L vs Frequency
100
10 µH
10
Inductance (µH)
Inductance (µH)
100
3.3 µH
1.0 µH
1
10 µH
10
3.3 µH
1.0 µH
1
0.33 µH
0.33 µH
0.1
0.1
0.01
1
0.1
10
0.1
10
1
100
Frequency (MHz)
Current (A)
Irms Derating
0.079 ±0.008
2,0 ±0,2
120
110
90
0.075 ±0.008
1,9 ±0,2
80
70
60
0.039
max
1,00
50
40
25°C
Percent of rated Irms
100
30
Recommended
Suggested
LandPattern
Pattern
Land
0.057
1,45
0.030 max
0,75
20
10
0
-55 -40
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
0.069
max
1,75
0.014
min
0,35
Dimensions are in
®
© Coilcraft, Inc. 2012
0.041
1,04
inches
mm
Specifications subject to change without notice.
Please check our website for latest information.
1102 Silver Lake Road
Cary IL 60013
0.087
2,2
Document ML646-2
Phone 800-981-0363
Fax 847-639-1508
Revised 06/28/12
E-mail [email protected]
Web www.coilcraft-cps.com
Similar pages