ON MBRD360T4G Switchmode power rectifier Datasheet

MBRD320, MBRD330,
MBRD340, MBRD350,
MBRD360
MBRD320, MBRD340 and MBRD360 are Preferred Devices
SWITCHMODE
Power Rectifiers
http://onsemi.com
DPAK Surface Mount Package
SCHOTTKY BARRIER
RECTIFIERS
3.0 AMPERES, 20 − 60 VOLTS
Designed for use as output rectifiers, free wheeling, protection and
steering diodes in switching power supplies, inverters and other
inductive switching circuits. These state−of−the−art devices have the
following features:
1
4
Features
•
•
•
•
3
Pb−Free Packages are Available
Extremely Fast Switching
Extremely Low Forward Drop
Platinum Barrier with Avalanche Guardrings
MARKING
DIAGRAM
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
•
•
•
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes;
260°C Max. for 10 Seconds
Shipped 75 Units Per Plastic Tube
Available in 16 mm Tape and Reel, 2500 Units Per Reel,
by Adding a “T4’’ Suffix to the Part Number
4
DPAK
CASE 369C
1 2
YWW
B
3x0
3
Y
WW
x
= Year
= Work Week
= 2, 3, 4, 5 or 6
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
Preferred devices are recommended choices for future use
and best overall value.
 Semiconductor Components Industries, LLC, 2004
December, 2004 − Rev. 4
1
Publication Order Number:
MBRD320/D
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
MAXIMUM RATINGS
MBRD
Rating
Symbol
320
330
340
350
360
20
30
40
50
60
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
Average Rectified Forward Current (TC = +125°C, Rated VR)
IF(AV)
3
A
Peak Repetitive Forward Current, TC = +125°C
(Rated VR, Square Wave, 20 kHz)
IFRM
6
A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFSM
75
A
Peak Repetitive Reverse Surge Current (2 s, 1 kHz)
IRRM
1
A
TJ
−65 to +150
°C
Storage Temperature Range
Tstg
−65 to +175
°C
Voltage Rate of Change (Rated VR)
dv/dt
10,000
V/s
Operating Junction Temperature Range
V
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress
limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation
is not implied, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Maximum Thermal Resistance, Junction−to−Case
RJC
6
°C/W
Maximum Thermal Resistance, Junction−to−Ambient (Note 1)
RJA
80
°C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 2)
iF = 3 Amps, TC = +25°C
iF = 3 Amps, TC = +125°C
iF = 6 Amps, TC = +25°C
iF = 6 Amps, TC = +125°C
VF
Maximum Instantaneous Reverse Current (Note 2)
(Rated dc Voltage, TC = +25°C)
(Rated dc Voltage, TC = +125°C)
iR
V
0.6
0.45
0.7
0.625
mA
0.2
20
1. Rating applies when surface mounted on the minimum pad size recommended.
2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
ORDERING INFORMATION
Package
Shipping†
DPAK
75 Units / Rail
MBRD320G
DPAK
(Pb−Free)
75 Units / Rail
MBRD320RL
DPAK
1800 Tape & Reel
DPAK
(Pb−Free)
1800 Tape & Reel
DPAK
2500 Tape & Reel
DPAK
(Pb−Free)
2500 Tape & Reel
MBRD330
DPAK
75 Units / Rail
MBRD330RL
DPAK
1800 Tape & Reel
MBRD330T4
DPAK
2500 Tape & Reel
MBRD340
DPAK
75 Units / Rail
MBRD340G
DPAK
(Pb−Free)
75 Units / Rail
MBRD340RL
DPAK
1800 Tape & Reel
DPAK
(Pb−Free)
1800 Tape & Reel
DPAK
2500 Tape & Reel
DPAK
(Pb−Free)
2500 Tape & Reel
MBRD350
DPAK
75 Units / Rail
MBRD350RL
DPAK
1800 Tape & Reel
MBRD350T4
DPAK
2500 Tape & Reel
MBRD360
DPAK
75 Units / Rail
MBRD360G
DPAK
(Pb−Free)
75 Units / Rail
MBRD360RL
DPAK
1800 Tape & Reel
DPAK
(Pb−Free)
1800 Tape & Reel
DPAK
2500 Tape & Reel
DPAK
(Pb−Free)
2500 Tape & Reel
Device
MBRD320
MBRD320RLG
MBRD320T4
MBRD320T4G
MBRD340RLG
MBRD340T4
MBRD340T4G
MBRD360RLG
MBRD360T4
MBRD360T4G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
3
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
TYPICAL CHARACTERISTICS
100
I R , REVERSE CURRENT (mA)
40
20
10
10
TJ = 150°C
125°C
4.0
2.0
1.0
100°C
75°C
0.4
0.2
0.1
0.04
0.02
0.01
0.004
0.002
0.001
25°C
0
40
20
30
50
VR, REVERSE VOLTAGE (VOLTS)
10
70
60
*The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these curves if VR is sufficient below rated VR.
150°C
TJ = 25°C
Figure 2. Typical Reverse Current
125°C
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
i F, INSTANTANEOUS FORWARD CURRENT (AMPS)
100
75°C
1.0
0.1
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
10
SINE
WAVE
9.0
TJ = 150°C
8.0
5
7.0
10
6.0
5.0
dc
IPK/IAV = 20
SQUARE
WAVE
4.0
3.0
2.0
1.0
0
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
vF, INSTANTANEOUS VOLTAGE (VOLTS)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 1. Typical Forward Voltage
Figure 3. Average Power Dissipation
http://onsemi.com
4
9.0
10
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
8.0
RATED VOLTAGE APPLIED
7.0
RJC = 6°C/W
6.0
TJ = 150°C
SINE
WAVE
OR
SQUARE
WAVE
5.0
4.0
3.0
dc
2.0
1.0
0
80
90
100
110
120
140
130
150
160
4.0
RJA = 80°C/W
SURFACE MOUNTED ON MIN.
PAD SIZE RECOMMENDED
TJ = 150°C
3.5
3.0
dc
SQUARE WAVE
OR
SINE WAVE
VR = 25 V
2.5
TJ = 125°C
2.0
1.5
TJ = 150°C
1.0
0.5
0
0
20
40
60
80
100
120
140
TC, CASE TEMPERATURE (°C)
TA, AMBIENT TEMPERATURE (°C)
Figure 4. Current Derating, Case
Figure 5. Current Derating, Ambient
1K
700
500
C, CAPACITANCE (pF)
I F(AV) , AVERAGE FORWARD CURRENT (AMPS)
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
300
200
TJ = 25°C
100
70
50
30
20
10
0
10
20
30
40
50
VR, REVERSE VOLTAGE (VOLTS)
Figure 6. Typical Capacitance
http://onsemi.com
5
60
70
160
MBRD320, MBRD330, MBRD340, MBRD350, MBRD360
PACKAGE DIMENSIONS
DPAK
CASE 369C
ISSUE O
−T−
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
SEATING
PLANE
E
R
4
Z
A
S
1
2
DIM
A
B
C
D
E
F
G
H
J
K
L
R
S
U
V
Z
3
U
K
F
J
L
H
D
G
2 PL
0.13 (0.005)
M
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.027 0.035
0.018 0.023
0.037 0.045
0.180 BSC
0.034 0.040
0.018 0.023
0.102 0.114
0.090 BSC
0.180 0.215
0.025 0.040
0.020
−−−
0.035 0.050
0.155
−−−
MILLIMETERS
MIN
MAX
5.97
6.22
6.35
6.73
2.19
2.38
0.69
0.88
0.46
0.58
0.94
1.14
4.58 BSC
0.87
1.01
0.46
0.58
2.60
2.89
2.29 BSC
4.57
5.45
0.63
1.01
0.51
−−−
0.89
1.27
3.93
−−−
T
SOLDERING FOOTPRINT*
6.20
0.244
3.0
0.118
2.58
0.101
5.80
0.228
1.6
0.063
6.172
0.243
SCALE 3:1
mm inches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC).
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
6
For additional information, please contact your
local Sales Representative.
MBRD320/D
Similar pages