CEL NDL5461PD 1000 to 1600 nm optical fiber communications 80 um ingaas pin photo diode module Datasheet

1000 to 1600 nm OPTICAL
FIBER COMMUNICATIONS φ80 µm
InGaAs PIN PHOTO DIODE MODULE
NDL5461P
SERIES
FEATURES
DESCRIPTION
• SMALL DARK CURRENT:
ID = 0.1 nA
The NDL5461P Series are InGaAs PIN photo diode modules
with multimode fiber. They are designed for long wavelength
transmission systems and cover the wavelength range between 1000 and 1600 nm with high efficiency.
• HIGH QUANTUM EFFICIENCY:
η = 86% at λ = 1300 nm
η = 75% at λ = 1550 nm
• DETECTING AREA SIZE:
φ 80 µm
• COAXIAL MODULE WITH MULTIMODE FIBER:
GI-50/125
• OPTIONAL SINGLE MODE FIBER:
SM-9/125
• LOW OPERATING VOLTAGE:
VR = 5 V
ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C)
PART NUMBER
SYMBOLS
PARAMETERS AND CONDITIONS
NDL5461P Series
UNITS
MIN
TYP
MAX
ID
Dark Current, VR = 5 V
nA
0.1
1.0
Ct
Terminal Capacitance, VR = 5 V, f = 1 MHz
pF
1.0
1.5
η
Quantum Efficiency, λ = 1300 nm
λ = 1550 nm
%
75
64
86
75
S
Responsivity, λ = 1300 nm
λ = 1550 nm
A/W
0.78
0.80
0.89
0.94
fC
Cut-off Frequency, VR = 5 V, λ = 1300 nm, RL = 50 Ω
GHz
2.5
California Eastern Laboratories
NDL5461P SERIES
ABSOLUTE MAXIMUM RATINGS1
(TC = 25°C, unless otherwise specified)
SYMBOLS
PARAMETERS
UNITS
RATINGS
VR
Reverse Voltage
V
20
IF
Forward Current
mA
10
PIN
Optical Input Power
mW
8
TC
Operating Case Temp.
°C
-40 to +85
Storage Temperature
°C
-40 to +85
TSTG
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified)
TEMPERATURE DEPENDENCE OF
RESPONSIVITY
WAVELENGTH DEPENDENCE OF
QUANTUM EFFICIENCY
Responsivity (Relative Value), ∆S/S (%)
Quantum Efficiency, η (%)
100
80
60
40
20
0
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
10
λ = 1300 nm
0
-10
-60
-40
-20
0
20
40
60
80
100
Wavelength, λ (µm)
Operating Case Temperature, TC (°C)
REVERSE VOLTAGE DEPENDENCE
OF DARK CURRENT
TEMPERATURE DEPENDENCE
OF DARK CURRENT
101
10
Dark Current, ID (nA)
Dark Current, Current, ID (nA)
VR = 5 V
TC = 75°C
1.0
50°C
25°C
0.1
0°C
-25°C
0.01
0.001
0
10
Reverse Voltage, VR (V)
100
10-1
10-2
20
10-3
-60
-40
-20
0
20
40
60
80
100
Operating Case Temperature, TC (°C)
NDL5461P SERIES
TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified)
REVERSE VOLTAGE DEPENDENCE
OF TERMINAL CAPACITANCE
FREQUENCY RESPONSE
VR = 10 V
λ = 1300 nm
RL = 50 Ω
f = 1.0 MHz
Response (3 dB/div.)
Terminal Capacitance, Ct (pF)
5
1
0.5
0.01
0.1
1
10
Reverse Voltage, VR (V)
100
0
2.5
Frequency, f (GHz)
5.0
NDL5461P SERIES
OUTLINE DIMENSIONS (Units in mm)
NDL5461P
NDL5461P1
Optical Fiber
GI-50/125
Length: 1 m MIN
Optical Fiber
GI-50/125
Length: 1 m MIN
Shrunk Tube
Shrunk Tube
φ2.5
14.0±0.1
φ2.5
φ6.0 - 0.1
+0.0
6.9±0.3 φ6.0- 0.1
6.9±0.3
+0.0
2
4.0±0.1
3.9±0.5
φ2.2 (2 places)
12.5 MIN
φ0.45
6.0 - 0.1
30.0 MAX
+0.0
30.0 MAX
12.5 MIN
3
1
2
7.0±0.3
3
1
3.0±0.3
4.0±0.3
φ2.0
1.5
φ2.0
18.0±0.1
PIN CONNECTIONS
1. Anode (Negative)
2. Cathode (Positive)
3. Case
NDL5461P2
Shrunk Tube
φ2.5
30.0 MAX
+0.0
φ6.0- 0.1
12.5 MIN
φ2.5 (2 places)
2
3
1
φ2.0
12.0±0.1
16.0±0.2
3
1
ORDERING INFORMATION
Optical Fiber
GI-50/125
Length: 1 m MIN
2.5±0.1
0.5±0.1
2
7.0±0.15
PART NUMBER
NDL5461P
NDL5461PC
NDL5461PD
NDL5461PS
NDL5461PSC
NDL5461PSD
NDL5461P1
NDL5461P1C
NDL5461P1D
NDL5461P1S
NDL5461P1SC
NDL5461P1SD
NDL5461P2
NDL5461P2C
NDL5461P2D
NDL5461P2S
NDL5461P2SC
NDL5461P2SD
AVAILABLE CONNECTOR
Without Connector
With FC-PC Connector
With SC-PC Connector
Without Connector
With FC-PC Connector
With SC-PC Connector
Without Connector
With FC-PC Connector
With SC-PC Connector
Without Connector
With FC-PC Connector
With SC-PC Connector
Without Connector
With FC-PC Connector
With SC-PC Connector
Without Connector
With FC-PC Connector
With SC-PC Connector
DESCRIPTION
GI-50/125 No Flange
SM-9/125
GI-50/125
Flat Mount
Flange
SM-9/125
GI-50/125
SM-9/125
Vertical
Flange
NDL5461P SERIES
HANDLING PRECAUTION FOR PD/APD MODULE
The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module
body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling
precautions:
1. Do not make the fiber bend radius less than 30 mm (*3).
2. Do not bend the fiber within the 18 mm section from the module body (*4).
3. Do not stress the ferrule with a lateral force exceeding 500 g (*5).
fiber
30 mm MIN (*3)
(*1)
18 mm MIN (*4)
ferrule (*5)
(*2)
module body
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
DATA SUBJECT TO CHANGE WITHOUT NOTICE
2/24/2000
Similar pages