Murata BLM15BD750SN1J Emifil (inductor type) chip ferrite bead blm15b series (0402 size) Datasheet

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead
BLM15B Series (0402 Size)
c Dimensions
c Equivalent Circuit
0.5±0.05
0.25±0.1
1.0±0.05
0.5±0.05
(Resistance element becomes dominant
at high frequencies.)
: Electrode
(in mm)
c Packaging
Code
Packaging
Minimum Quantity
D
180mm Paper Tape
10000
J
330mm Paper Tape
50000
B
Bulk(Bag)
1000
c Rated Value (p: packaging code)
Part Number
BLM15BD750SN1p
Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C)
Rated Current
DC Resistance
Operating
Temperature Range
75ohm ±25%
-
300mA
0.20ohm max.
-55 to +125°C
BLM15BD121SN1p
120ohm ±25%
-
300mA
0.30ohm max.
-55 to +125°C
BLM15BD221SN1p
220ohm ±25%
-
300mA
0.40ohm max.
-55 to +125°C
BLM15BD471SN1p
470ohm ±25%
-
200mA
0.60ohm max.
-55 to +125°C
BLM15BD601SN1p
600ohm ±25%
-
200mA
0.65ohm max.
-55 to +125°C
-
200mA
0.90ohm max.
-55 to +125°C
BLM15BD102SN1p
1000ohm ±25%
BLM15BD182SN1p
1800ohm ±25%
-
100mA
1.40ohm max.
-55 to +125°C
BLM15BB050SN1p
5ohm ±25%
-
500mA
0.08ohm max.
-55 to +125°C
BLM15BB100SN1p
10ohm ±25%
-
300mA
0.10ohm max.
-55 to +125°C
BLM15BB220SN1p
22ohm ±25%
-
300mA
0.20ohm max.
-55 to +125°C
BLM15BB470SN1p
47ohm ±25%
-
300mA
0.35ohm max.
-55 to +125°C
BLM15BB750SN1p
75ohm ±25%
-
300mA
0.40ohm max.
-55 to +125°C
BLM15BB121SN1p
120ohm ±25%
-
300mA
0.55ohm max.
-55 to +125°C
BLM15BB221SN1p
220ohm ±25%
-
200mA
0.80ohm max.
-55 to +125°C
BLM15BC121SN1p
120ohm ±25%
-
350mA
0.45ohm max.
-55 to +125°C
BLM15BC241SN1p
240ohm ±25%
-
250mA
0.70ohm max.
-55 to +125°C
BLM15BA050SN1p
5ohm ±25%
-
300mA
0.10ohm max.
-55 to +125°C
BLM15BA100SN1p
10ohm ±25%
-
300mA
0.20ohm max.
-55 to +125°C
BLM15BA220SN1p
22ohm ±25%
-
300mA
0.30ohm max.
-55 to +125°C
BLM15BA330SN1p
33ohm ±25%
-
300mA
0.40ohm max.
-55 to +125°C
BLM15BA470SN1p
47ohm ±25%
-
200mA
0.60ohm max.
-55 to +125°C
Number of Circuits: 1
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
2
Continued from the preceding page.
Part Number
BLM15BA750SN1p
Impedance
(at 100MHz/20°C)
Impedance
(at 1GHz/20°C)
Rated Current
DC Resistance
Operating
Temperature Range
75ohm ±25%
-
200mA
0.80ohm max.
-55 to +125°C
Number of Circuits: 1
c Impedance-Frequency Characteristics (Main Items)
c Impedance-Frequency Characteristics (Main Items)
BLM15BD Series
BLM15BB Series
900
2000
BLM15BD182SN1
BLM15BD102SN1
BLM15BD601SN1
BLM15BD471SN1
BLM15BD221SN1
BLM15BD121SN1
BLM15BD750SN1
1000
BLM15BB221SN1
BLM15BB121SN1
BLM15BB750SN1
BLM15BB470SN1
BLM15BB220SN1
BLM15BB100SN1
BLM15BB050SN1
600
Impedance (Ω)
Impedance (Ω)
1500
300
500
0
0
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics (Main Items)
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics (Main Items)
BLM15BC Series
BLM15BA Series
5000
4000
4000
BLM15BA750SN1
3000
Impedance (Ω)
Impedance (Ω)
BLM15BA470SN1
BLM15BC241SN1
2000
BLM15BC121SN1
BLM15BA330SN1
3000
BLM15BA220SN1
BLM15BA100SN1
2000
BLM15BA050SN1
1000
1000
0
0
1
10
100
Frequency (MHz)
1000
c Impedance-Frequency Characteristics
3000
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM15BD750SN1
BLM15BD121SN1
150
250
Impedance (Ω)
Impedance (Ω)
200
100
Z
R
X
50
Z
150
R
100
X
50
0
1
10
100
Frequency (MHz)
1000
0
3000
1
10
100
Frequency (MHz)
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
3
Continued from the preceding page.
c Impedance-Frequency Characteristics
c Impedance-Frequency Characteristics
BLM15BD221SN1
BLM15BD471SN1
1000
400
900
Z
800
Impedance (Ω)
Impedance (Ω)
300
R
200
X
100
700
Z
600
500
R
400
300
X
200
100
0
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
100
Frequency (MHz)
3000
BLM15BD102SN1
1000
1500
800
Z
Impedance (Ω)
Z
600
R
400
X
1000
R
500
X
200
0
1000
c Impedance-Frequency Characteristics
BLM15BD601SN1
Impedance (Ω)
10
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM15BD182SN1
BLM15BB050SN1
2000
25
Z
Impedance (Ω)
Impedance (Ω)
20
Z
1500
1000
R
10
R
500
5
X
0
15
1
10
100
Frequency (MHz)
1000
0
3000
X
1
10
100
Frequency (MHz)
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
4
Continued from the preceding page.
c Impedance-Frequency Characteristics
c Impedance-Frequency Characteristics
BLM15BB100SN1
BLM15BB220SN1
120
60
Impedance (Ω)
Impedance (Ω)
R
30
Z
100
Z
45
X
R
80
60
40
X
15
20
0
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM15BB470SN1
BLM15BB750SN1
250
400
Z
300
Impedance (Ω)
Impedance (Ω)
200
150
100
0
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
R
X
X
1
200
100
R
50
Z
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM15BB121SN1
BLM15BB221SN1
500
900
300
Impedance (Ω)
Impedance (Ω)
400
Z
200
R
600
300
Z
100
X
0
1
10
100
Frequency (MHz)
1000
X
0
3000
1
10
100
Frequency (MHz)
R
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
5
Continued from the preceding page.
c Impedance-Frequency Characteristics
c Impedance-Frequency Characteristics
BLM15BC121SN1
BLM15BC241SN1
1000
3000
Z
Impedance (Ω)
Impedance (Ω)
R
600
X
400
Z
2500
800
200
2000
1500
1000
500
X
R
0
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
200
Z
80
Impedance (Ω)
Impedance (Ω)
3000
240
100
R
60
X
40
20
Z
160
R
120
X
80
40
1
10
100
Frequency (MHz)
1000
0
3000
c Impedance-Frequency Characteristics
1
10
100
Frequency (MHz)
1000
3000
c Impedance-Frequency Characteristics
BLM15BA220SN1
BLM15BA330SN1
600
1000
500
800
Impedance (Ω)
Impedance (Ω)
1000
BLM15BA100SN1
120
400
300
Z
200
600
400
Z
R
200
100
0
100
Frequency (MHz)
c Impedance-Frequency Characteristics
BLM15BA050SN1
0
10
1
10
100
Frequency (MHz)
X
1000
R
X
0
3000
1
10
100
Frequency (MHz)
1000
3000
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
6
Continued from the preceding page.
c Impedance-Frequency Characteristics
c Impedance-Frequency Characteristics
BLM15BA750SN1
2000
5000
1600
4000
Impedance (Ω)
Impedance (Ω)
BLM15BA470SN1
1200
800
3000
2000
R
400
0
R
1
10
100
Frequency (MHz)
Z
X
1000
X
1000
Z
0
3000
1
10
100
Frequency (MHz)
1000
3000
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.7.5
http://www.murata.com/
Similar pages