Power Inductors - Unshielded CTLPO1704 Series From 1.2 µH to 330 µH Not shown at actual size. RoHS Compliant Available ctparts.com SPECIFICATIONS Parts are available in ±20% tolerance only. *Inductance drop =10% typ. at IDC. CTLPO1704F Please specify “F” for RoHS Compliant Inductance (µH ±20%) L Test Freq. (kHz) CTLPO1704_-122M CTLPO1704_-152M CTLPO1704_-222M CTLPO1704_-332M CTLPO1704_-472M CTLPO1704_-682M 1.2 1.5 2.2 3.3 4.7 6.8 CTLPO1704_-103M CTLPO1704_-153M CTLPO1704_-223M CTLPO1704_-333M CTLPO1704_-473M CTLPO1704_-683M CTLPO1704_-104M CTLPO1704_-154M CTLPO1704_-224M CTLPO1704_-334M Part Number DCR Max. Ω) (Ω IDC* Max. (A) 100 100 100 100 100 100 0.08 0.10 0.12 0.16 0.20 0.32 2.1 1.9 1.6 1.3 1.1 0.90 10 15 22 33 47 68 100 100 100 100 100 100 0.41 0.55 0.85 1.3 1.8 2.5 0.80 0.65 0.50 0.40 0.35 0.30 100 150 220 330 100 100 100 100 3.5 5.0 7.0 15.0 0.25 0.18 0.16 0.13 PHYSICAL DIMENSIONS Size mm inches CHARACTERISTICS A B C Max. Max. Max. F G H 6.60 5.50 1.00 4.30 4.90 3.40 2.50 0.75 0.217 0.039 0.169 0.193 0.134 0.098 0.030 PAD LAYOUT 01.14.05 Technologies E 0.260 Description: SMD power inductor Applications: PC cards and other low profile applications Operating Temperature: -40°C to +85°C Inductance Tolerance: ±20% Testing: Tested on a HP4285A at 100 KHz , 0.1V , 0Adc Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant available Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. CENTRAL D Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice