1.8V ~ 3.3V SMD TCXO for GPS Applications RoHS Compliant / Pb Free Model: FOX922-GP SERIES Rev. 1/25/2011 Page 1 of 2 http://www.foxonline.com/need_a_sample.htm FEATURES • • • • 0.5PPM Stability Supply Voltages of 1.8V ~ 3.3V 1.0mm Height Max Clipped Sine Output Preliminary • PART NUMBER SELECTION Part Number 839CGP-Frequency-xxxxx 840CGP-Frequency-xxxxx 839BGP-Frequency-xxxxx 840BGP-Frequency-xxxxx 839DGP-Frequency-xxxxx 840DGP-Frequency-xxxxx 839FGP-Frequency-xxxxx 840FGP-Frequency-xxxxx 839GGP-Frequency-xxxxx 840GGP-Frequency-xxxxx 839LGP-Frequency-xxxxx 840LGP-Frequency-xxxxx Learn More - Internet Required 2 .7 M ax Model Number Supply Voltage(Vdd) TCXO/VCTCXO 3.3V±5% 3.3V±5% 3.0V±5% 3.0V±5% 2.8V±5% 2.8V±5% 2.7V±5% 2.7V±5% 2.5V±5% 2.5V±5% 1.8V±5% 1.8V±5% FOX922C-GP FOX922CE-GP FOX922B-GP FOX922BE-GP FOX922D-GP FOX922DE-GP FOX922F-GP FOX922FE-GP FOX922G-GP FOX922GE-GP FOX922L-GP FOX922LE-GP TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO #3 #4 2 .2 M ax T op V iew #2 #1 D ot den otes p in 1. 1 .0 M ax • ELECTRICAL CHARACTERISTICS MAX (unless otherwise noted) PARAMETERS Available Frequencies (Fo) Temperature Range Operating (Topr) Storage (Tstg) Supply Voltage (Vdd) Input Current (Idd) VDD=1.8V ~ 3.0V Initial Frequency Tolerance @ 25ºC (after 2 reflows) (VCTCXO: Vc = 50%Vdd)1 Frequency Stability Over Temperature Range Over Supply Voltage Change (Vdd±5%) Over Load Change (10KΩ //10pF) ±10% Output Waveform (Clipped Sine) Peak-to-Peak Level (Vp-p) Output Load Pullability (VCTCXO) Vdd = 2.5V~3.3V, Vc = 50% Vdd±1.0V Vdd = 1.8V, Vc = 0.9±0.6V Aging per year Phase Noise (16.369 MHz, @ 10kHz offset) Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish See Table Below 1 B o ttom V iew -30ºC ~ +85ºC -40ºC ~ +85ºC 1.8V ~ 3.3V 2.0mA 0 .7 5 1 .2 1 .8 4 3 TP 0 .6 1 .5 5 2 .3 ±2.0PPM ±0.5PPM ±0.2PPM ±0.2PPM R ecom m ended S o ld e r P a d Layout 2 .8 0 1 .4 5 0.8V Min. (10KΩ //10pF) ±10% ±3 ~ ±5 PPM ±1.0 PPM -145 dBc/Hz Typ. 260ºC / 10 Seconds 1 Au 2 TP TP 4 2 .3 0 0 .6 5 3 T o p V iew 1 TP 2 1 For proper operation, a control Voltage (Vc) must be applied to pin 1 on VCTCXO's. Does not imply a stocked part. All frequencies may not be available for all Vdd. 3 Other fequencies may be available. Contact Fox Technical support with your requirements. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may very.All specifications subject to change without notice. 2 • STANDARD FREQUENCIES 16.367667 MHz 16.800 MHz 26.000 MHz 38.400 MHz FOXElectronics 16.368 MHz 19.200 MHz 27.456 MHz 2&3 All dimensions are in millimeters. Pin Connections VCXO #1 GND #3 Output #2 GND #4 Vdd VCTCXO #1 Vc #3 Output #2 GND #4Vdd 16.369 MHz 24.5535 MHz 33.600 MHz 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .11283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2011 FOX ELECTRONICS | ISO9001:2008 Certified 1.8V ~ 3.3V SMD TCXO for GPS Applications Model: FOX922-GP SERIES RoHS Compliant / Pb Free Page 2 of 2 • TAPE SPECIFICATIONS (millimeters) B C MODEL A FOX922-GP ∅1.5 4.0 4.0 FOXElectronics Rev. 1/25/2011 http://www.foxonline.com/need_a_sample.htm D 3.5 • REEL SPECIFICATIONS (millimeters) G H I J K L E F STD Reel QTY MODEL FOX922-GP 2.0 ∅13 ∅21 ∅60 ∅180 9.0 8.0 1.4 3,000 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .11283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2011 FOX ELECTRONICS | ISO9001:2008 Certified M 2.0 23