Purdy AND157HYP Ingaalp high brightness yellow light emission Datasheet

AND157HYP
Ultra Bright LED Lamps: Type 3
Weight: 0.31 g
Unit: mm
AND157HYP
InGaInP High Brightness Yellow Light Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength (λp = 590 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
IF
30
mA
Reverse Voltage
VR
5
Power Dissipation
PD
120
Operating Temperature Range
TOpr
-40 to 85
°C
Storage Temperature Range
TStg
-40 to 100
°C
V
mW
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Forward Voltage
VF
IF = 20 mA
1.6
Reverse Current
IR
VR = 4 V
–
–
Luminous Intensity
IV
IF = 20 mA
1800
2850
Peak Emission Wavelength
lP
IF = 20 mA
–
591
–
Spectral Line Half Width
∆λ
IF = 20 mA
–
15
–
nm
Dominant Wavelength
λd
IF = 20 mA
–
591
–
nm
Full Viewing Angle
θ
IV = 1/2 Peak
–
15
_
degree
2.0
Maximum
Unit
2.4
10
4500
V
µA
mcd
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Purdy Electronics Corporation • 755 Pastoria Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
9-1-13
AND157HYP
Ultra Bright LED Lamps: Type 3
Typical Electro-Optical Characteristics Curves
Relative Intensity vs. Wavelength (Ta=25℃)
Directivity (Ta=25℃)
0.8
Radiation Angle
Relative Intensity (a.u.)
1.0
0.6
0.4
0.2
0.0
450
500
550
600
650
700
Wavelength(nm)
Wavelength
(nm)
Relative Intensity (a.u.)
Relative Intensity vs. Forward Current (Ta=25℃)
50
2.5
40
2.0
Relative Intensity(a.u.)
Forward Current (mA)
Forward Current vs. Forward Voltage (Ta=25℃)
30
20
10
0
1.0
1.5
2.0
2.5
3.0
1.5
1.0
0.5
0.0
3.5
0
Forward Voltage(V)
Forward Voltage (V)
30
40
50
Forward Current vs. Ambient Temp.
2.0
60
Forward Current (mA)
Relative Intensity(a.u.)
20
Forward Current (mA)
Relative Intensity vs. Ambient Temp.
1.5
1.0
0.5
0.0
25
10
30
35
40
45
50
55
60
Ambient Temperature Ta(℃)
65
70
50
40
30
20
10
0
0
20
40
60
80
100
Ambient Temperature Ta(℃)
Purdy Electronics Corporation • 755 Pastoria Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
9-1-13
Similar pages