AGB3309 50Ω High Linearity Low Noise Internally Biased Wideband Gain Block PRELIMINARY DATA SHEET - Rev 1.0 FEATURES • On-chip Active Bias • DC-3500 MHz Operation Bandwidth • +35 dBm Output IP3 • 5 dB Noise Figure at 850 MHz • 15 dB Gain at 850 MHz • +18 dBm P1dB • SOT-89 Package • Single +5 V Supply • Case Temperature: -40 to +85 °C APPLICATIONS • Cellular Base Stations for W-CDMA, CDMA, TDMA, GSM, PCS and CDPD systems • Fixed Wireless • MMDS/WLL • WLAN S24 Package SOT-89 PRODUCT DESCRIPTION The AGB3309 is one of a series of high performance InGaP HBT amplifiers designed for use in applications requiring high linearity, low noise, and low distortion. Active bias circuits on-chip eliminate the need for external resistive feedback, and no external matching components are needed for insertion into a 50Ω system. With a high output IP3, low noise figure, and wide band operation, the AGB3309 is ideal for wireless infrastructure applications such as Cellular Base Stations, MMDS, and WLL. Offered in a low cost SOT-89 surface mount package, the AGB3309 requires a single +5 V supply, and typically consumes 0.325 Watts of power. RF Output / Bias RF Input Active Bias Figure 1: Block Diagram 07/2003 AGB3309 GND 4 1 2 3 RF IN GND RF OUT Figure 2: Pinout (X-ray Top View) Table 1: Pin Description 2 PIN NAME 1 RFIN RF Input 2 GND Ground 3 RFOUT RF Output / Bias 4 GND Ground DESCRIPTION PRELIMINARY DATA SHEET - Rev 1.0 07/2003 AGB3309 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER MIN MAX UNIT Device Voltage (VCC) 0 +6 VD C RF Input Power (PIN) - +10 dB m -40 +150 °C - +200 °C Storage Temperature (TSTG) Junction Temperature Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER MIN TYP MAX UNIT Operating Frequency (f) (1) - - 3500 MHz Supply Voltage (VSUPPLY) - +5 - VD C Case Temperature (TC) -40 - +85 °C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) Operating frequency is defined by the output return loss (S22) having a VSWR less than 2:1. PRELIMINARY DATA SHEET - Rev 1.0 07/2003 3 AGB3309 Table 4: Electrical Specifications Ω system) (TA = +25 °C, VSUPPLY = +5 VDC, 50Ω PARAMETER MIN TYP MAX UNIT Gain (S21) 850 1950 2140 2450 MHz MHz MHz MHz - 15.5 14.5 14.5 14 - dB 850 1950 2140 2450 MHz MHz MHz MHz - +35 +35 +35 +35 - dB m Output 1dB Compression (P1dB) 850 MHz - +18 - dB m - 5.2 - dB Thermal Resistance ( θJC) - 172 - °C/W Supply Current (ICC) - 65 - mA Output IP3 (1) Noise Figure 850 MHz Notes: (1) OIP3 is measured with two tones at 1 MHz spacing at 0 dBm output power per tone. 2. Performance as measured on ANADIGICS test fixture (see Figure 3). All capacitors are muRata GRM39 series. The inductor is a Coilcraft 0603CS series. +5 VDC 10 pF 100 pF 0.01 µF 100 nH 0.01 µF RF Input 0.01 µF AGB3309 Figure 3: Application Circuit (50 Ω Terminations) 4 PRELIMINARY DATA SHEET - Rev 1.0 07/2003 RF Output AGB3309 PERFORMANCE DATA Figure 5: Isolation vs. Frequency De-embedded 50W S-parameter (TA = +25 °C, VSUPPLY = +5 V, ICC = 65 mA) 25 0 20 -10 Mag S12: Isolation (dB) Mag S21: Gain (dB) Figure 4: Gain vs. Frequency De-embedded 50W S-parameter (TA = +25 °C, VSUPPLY = +5 V, ICC = 65 mA) 15 10 -20 -30 -40 5 -50 0 0 1 2 3 4 5 6 0 7 1 2 4 5 6 7 Figure 7: Output Return Loss vs. Frequency De-embedded 50W S-parameter (TA = +25 °C, VSUPPLY = +5 V, ICC = 65 mA) Figure 6: Input Return Loss vs. Frequency De-embedded 50W S-parameter (TA = +25 °C, VSUPPLY = +5 V, ICC = 65 mA) 0 Mag S22: Output Return Loss (dB) 0 Mag S11: Input Return Loss (dB) 3 Frequency (GHz) Frequency (GHz) -10 -20 -30 -40 -10 -20 -30 -40 -50 -50 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) PRELIMINARY DATA SHEET - Rev 1.0 07/2003 5 AGB3309 PACKAGE OUTLINE Figure 8: S24 Package Outline – SOT-89 3309 LLLLNN LLLL= FOUR NUMERIC CHARACTERS Figure 9: Branding Specification 6 PRELIMINARY DATA SHEET - Rev 1.0 07/2003 AGB3309 NOTES PRELIMINARY DATA SHEET - Rev 1.0 07/2003 7 AGB3309 ORDERING INFORMATION PART NUMBER TEMPERATURE RANGE PACKAGE DESCRIPTION COMPONENT PACKAGING AGB3309S24Q1 -40 to +85°C SOT-89 Package 1,000 piece Tape and Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8 PRELIMINARY DATA SHEET - Rev 1.0 07/2003