CY25818/19 Spread Spectrum Clock Generator Features Applications • 8- to 32-MHz input frequency range • Printers and MFPs • CY25818: 8–16 MHz • LCD panels and notebook PCs • CY25819: 16–32 MHz • Digital copiers • Separate modulated and unmodulated clocks • PDAs • Accepts clock, crystal, and resonator inputs • Automotive • Down spread modulation • CD-ROM, VCD, and DVD • Power-down function • Networking and LAN/WAN • Low-power dissipation • Scanners — CY25818 = 33 mW-typ @ 8 MHz • Modems — CY25818 = 56 mW-typ @ 16 MHz • Embedded digital systems — CY25819 = 36 mW-typ @ 16 MHz Benefits — CY25819 = 63 mW-typ @ 32 MHz • Peak electromagnetic interference (EMI) reduction by 8–16 dB • Low cycle-to-cycle jitter — SSCLK = 250 ps-typ • Fast time to market — REFOUT = 275 ps-typ • Cost reduction • Available in 8-pin (150-mil) SOIC package Block Diagram Pin Configuration 300K XIN/CLKIN 1 REFERENCE DIVIDER PD and CP MODULATION CONTROL VCO COUNTER LF XIN/CLKIN 1 XOUT 8 VDD Vss 2 VCO CY25818 CY25819 S0 3 7 VSS 2 8 XOUT 6 PD# SSCLK 4 INPUT DECODER 3 DIVIDER and MUX 4 SSCLK 5 REFCLK 7 Vdd 5 REFCLK 8 Pin SOIC 8-pin SOIC 6 S0 PD# Cypress Semiconductor Corporation Document #: 38-07362 Rev. *B • 198 Champion Court • San Jose, CA 95134-1709 • 408-943-2600 Revised April 11, 2006 [+] Feedback CY25818/19 . Pin Description Pin Name Description 1 XIN/CLK 2 Vss Power Supply Ground. 3 S0 Digital Spread% Control Pin. 3-Level input (H-M-L). Default = M. 4 SSCLK 5 REFCLK 6 PD# Power-Down Control Pin. Default = H (Vdd). 7 Vdd Positive Power Supply. 8 XOUT Clock, Crystal, or Ceramic Resonator Input Pin. Modulated Spread Spectrum Output Clock. The output frequency is referenced to input frequency. Refer to Table 2 for the amount of modulation (Spread%). Unmodulated Reference Clock Output. The unmodulated output frequency is the same as the input frequency. Clock, Crystal, or Ceramic Resonator Output Pin. Leave this pin unconnected if an external clock is used at XIN pin. Overview The Cypress CY25818/19 products are Spread Spectrum Clock Generator (SSCG) ICs used for the purpose of reducing EMI found in today’s high-speed digital electronic systems. The devices use a Cypress proprietary phase-locked loop (PLL) and Spread Spectrum Clock (SSC) technology to synthesize and modulate the frequency of the input clock. By frequency modulating the clock, the measured EMI at the fundamental and harmonic frequencies is greatly reduced. This reduction in radiated energy can significantly reduce the cost of complying with regulatory agency requirements and improve time to market without degrading system performance. The CY25818/19 products are available in an 8-pin SOIC (150-mil) package with a commercial operating temperature range of 0–70°C. Contact Cypress for availability of –40 to +85°C industrial temperature range operation or TSSOP package versions. Refer to the CY25568, CY25811, CY25812, and CY25814 products for other functions such as clock multiplication of 1×, 2×, or 4× to generate a wide range of Spread Spectrum output clocks from 4 to 128 MHz. Input Frequency Range and Selection CY25818/19 input frequency range is 8–32 MHz. This range is divided into two segments, as given in Table 1. Table 1. Input and Output Frequency Selection The input frequency range is 8–16 MHz for the CY25818 and 16–32 MHz for the CY25819. Both products accept external clock, crystal, or ceramic resonator inputs. The CY25818/19 provide separate modulated (SSCLK) and unmodulated reference (REFCLK) clock outputs which are the same frequency as the input clock frequency. Down spread frequency modulation can be selected by the user, based on three discrete values of Spread%. A separate power down function is also provided. Product CY25818 CY25819 Input/Output Frequency Range 8–16 MHz 16–32 MHz Spread% Selection CY25818/19 SSCG products provide Down-Spread frequency modulation. The amount of Spread% is selected by using 3-Level S0 digital input. Spread% values are given in Table 2. Table 2. Spread% Selection XIN (MHz) Product 8–10 10–12 12–14 14–16 16–20 20–24 24–28 28–32 CY25818 CY25818 CY25818 CY25818 CY25819 CY25819 CY25819 CY25819 Document #: 38-07362 Rev. *B S0 = 1 Down (%) –3.0 –2.7 –2.5 –2.3 –3.0 –2.7 –2.5 –2.3 S0 = 0 Down (%) –2.2 –1.9 –1.8 –1.7 –2.2 –1.9 –1.8 –1.7 S0 = M Down (%) –0.7 –0.6 –0.6 –0.5 –0.7 –0.6 –0.6 –0.5 Page 2 of 7 [+] Feedback CY25818/19 3-Level Digital Inputs Modulation Rate S0 digital input is designed to sense three logic levels designated as HIGH “1,” LOW “0,” and MIDDLE “M.” With this 3-Level digital input logic, the 3-Level logic is able to detect three different logic levels. Spread Spectrum Clock Generators utilize frequency modulation (FM) to distribute energy over a specific band of frequencies. The maximum frequency of the clock (fmax) and minimum frequency of the clock (fmin) determine this band of frequencies. The time required to transition from fmin to fmax and back to fmin is the period of the Modulation Rate, Tmod. The Modulation Rates of SSCG clocks are generally referred to in terms of frequency, and fmod = 1/Tmod. The S0 pin includes an on-chip 20K (10K/10K) resistor divider. No external application resistors are needed to implement 3-Level logic, as follows. Logic Level “0”: 3-Level logic pin connected to GND. Logic Level “M”: 3-Level logic pin left floating (no connection.) Logic Level “1”: 3-Level logic pin connected to Vdd. In the case of CY25818/19 devices, the (Spread Spectrum) Modulation Rate, fmod, is given by the following formula: Figure 1 illustrates how to implement 3-Level Logic. L O G IC L O W (0 ) L O G IC H IG H (H ) L O G IC M ID D L E (M ) VDD S0 S0 S0 to V S S UNCO NNECTED to V D D The input clock frequency, fin, and the internal divider determine the Modulation Rate. fmod = fIN/DR where fmod is the Modulation Rate, fIN is the Input Frequency, and DR is the Divider Ratio, as given in Table 3. VSS Figure 1. 3-Level Logic Table 3. Modulation Rate Divider Ratios Product Input Frequency Range Divider Ratio (DR) CY25818 8–16 MHz 256 CY25819 16–32 MHz 512 Maximum Ratings[1, 2] Input Voltage Relative to Vss:............................... Vss + 0.3V Supply Voltage (Vdd): ..................................................+ 5.5V Input Voltage Relative to Vdd:.............................. Vdd + 0.3V Operating Temperature:................................... 0°C to + 70°C Storage Temperature: ................................ –65°C to + 150°C Table 4. DC Electrical Characteristics Vdd = 3.3V ±10%, TA = 0°C to +70°C and CL = 15 pF (unless otherwise noted) Parameter Description Conditions Min. Typ. Max. Unit Vdd Power Supply Range 2.97 3.3 3.63 V VINH Input HIGH Voltage S0 Input 0.85 Vdd Vdd Vdd V VINM Input MIDDLE Voltage S0 Input 0.40 Vdd 0.50 Vdd 0.60 Vdd V VINL Input LOW Voltage S0 Input 0.0 0.0 0.15 Vdd V VOH1 Output HIGH Voltage IOH = 4 ma, SSCLK and REFCLK 2.4 – – V VOH2 Output HIGH Voltage IOH = 6 ma, SSCLK and REFCLK 2.0 – – V VOL1 Output LOW Voltage IOL = 4 ma, SSCLK Output – – 0.4 V VOL2 Output LOW Voltage IOL = 10 ma, SSCLK Output – – 1.2 V CIN1 Input Capacitance XIN (Pin 1) and XOUT (Pin 8) 6.0 7.5 9.0 pF CIN2 Input Capacitance All Digital Inputs 3.5 4.5 6.0 pF IDD1 Power Supply Current FIN=8 MHz, no load – 10.0 12.5 mA IDD3 Power Supply Current FIN=32 MHz, no load – 19.0 23.0 mA IDD4 Power Supply Current PD# = Vss – 150 250 mA Document #: 38-07362 Rev. *B Page 3 of 7 [+] Feedback CY25818/19 Table 5. Timing Electrical Characteristics Vdd = 3.3V ±10%, TA = 0°C to +70°C and CL = 15 pF (unless otherwise noted) Parameter Description Conditions Min. Typ. Max. Unit ICLKFR1 Input Frequency Range CY25818 8 – 16 MHz ICLKFR2 Input Frequency Range CY25819 16 – 32 MHz trise1 Clock Rise Time SSCLK and REFCLK, 0.4V to 2.4V 2.0 3.0 4.0 ns tfall1 Clock Fall Time SSCLK and REFCLK, 0.4V to 2.4V 2.0 3.0 4.0 ns CDCin Input Clock Duty Cycle XIN 20 50 80 % CDCout Output Clock Duty Cycle SSCLK and REFCLK @ 1.5V 45 50 55 % CCJss Cycle-to-Cycle Jitter SSCLK; FIN = FOUT = 8–32 MHz 250 350 ps CCJref Cycle-to-Cycle Jitter REFCLK; FIN = FOUT = 8–32 MHz 275 375 ps Characteristics Curves 20 300 290 19 16 15 14 R EFC L K C Y2 5 8 19 13 270 CCJ (ps) C Y 2 5 8 19 16 - 3 2 M H z 17 R EFC L K C Y2 5 8 18 280 C Y 2 5 8 18 8 - 16 M H z 18 IDD(mA) The following curves demonstrate the characteristic behavior of the CY25818/19 when tested over a number of environmental and application specific parameters. These are typical performance curves and are not meant to replace any parameter specified in Table 4 and Table 5. 12 260 11 250 10 8 S S C LK C Y2 5 8 19 240 12 16 20 24 28 32 F r e q ue nc y ( M H z ) 230 S S C LK C Y2 5 8 18 220 Figure 4. IDD (mA) vs. Frequency (MHz) 210 200 8 12 16 20 24 28 32 F r e q ue nc y ( M H z ) BW (%) Figure 2. CCJ (ps) vs. Frequency (MHz) 2.75 2.5 BW % 12 MHz 3.1 3 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2 1.9 1.8 [email protected] MHz CY25819@32 MHz 2.8 2.25 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 VDD (volts) 32.0 MHz 2 Figure 5. Bandwidth% vs. Vdd 1.75 -40 -25 -10 5 20 35 50 65 80 95 110 125 Temp (C) Figure 3. Bandwidth% vs. Temperature Notes: 1. Single Power Supply: The voltage on any input or I/O pin cannot exceed the power pin during power-up. 2. Operation at any Absolute Maximum Rating is not implied. Document #: 38-07362 Rev. *B Page 4 of 7 [+] Feedback CY25818/19 SSCG Profiles CY25818/19 SSCG products use a non-linear “optimized” frequency profile as shown in Figure 6 and Figure 7. The use of Cypress proprietary “optimized” frequency profile maintains flat energy distribution over the fundamental and higher order harmonics. This results in additional EMI reduction in electronic systems. Figure 7. CY25819 Spread Spectrum Profile (Frequency vs. Time)[4] Figure 6. CY25818 Spread Spectrum Profile (Frequency vs. Time)[3] Application Schematic Vdd C3 0.1 uF 7 C2 27 pF C3 1 XIN Vdd 14.3 MHz or 27.0 MHz 8 SSCLK REFCLK XOUT 27 pF 4 5 14.3 MHz (CY25818) 27.0 MHz (CY25819) CY25818 CY25819 6 PD# S0 3 Vss 2 Figure 8. Typical Application Schematic Notes: 3. XIN = 16.0 MHz; S0 = 1; SSCLK = 16.0 MHz; BW = –2.14%. 4. Xin = 32.0MHz; S0 = 1; SSCLK = 32.0 MHz; BW = -2.15% Document #: 38-07362 Rev. *B Page 5 of 7 [+] Feedback CY25818/19 Ordering Information Part Number Package Type Product Flow CY25818SC 8-pin SOIC Commercial, 0° to 70°C CY25818SCT 8-pin SOIC–Tape and Reel Commercial, 0° to 70°C CY25819SC 8-pin SOIC Commercial, 0° to 70°C CY25819SCT 8-pin SOIC–Tape and Reel Commercial, 0° to 70°C CY25818SXC 8-pin SOIC Commercial, 0° to 70°C CY25818SXCT 8-pin SOIC–Tape and Reel Commercial, 0° to 70°C Lead-free CY25819SXC 8-pin SOIC Commercial, 0° to 70°C CY25819SXCT 8-pin SOIC–Tape and Reel Commercial, 0° to 70°C Package Drawing and Dimensions 8-lead (150-Mil) SOIC S8 8 Lead (150 Mil) SOIC - S08 PIN 1 ID 4 1 1. DIMENSIONS IN INCHES[MM] MIN. MAX. 2. PIN 1 ID IS OPTIONAL, ROUND ON SINGLE LEADFRAME RECTANGULAR ON MATRIX LEADFRAME 0.150[3.810] 0.157[3.987] 3. REFERENCE JEDEC MS-012 0.230[5.842] 0.244[6.197] 4. PACKAGE WEIGHT 0.07gms PART # S08.15 STANDARD PKG. 5 SZ08.15 LEAD FREE PKG. 8 0.189[4.800] 0.196[4.978] 0.010[0.254] 0.016[0.406] SEATING PLANE X 45° 0.061[1.549] 0.068[1.727] 0.004[0.102] 0.050[1.270] BSC 0.004[0.102] 0.0098[0.249] 0°~8° 0.016[0.406] 0.035[0.889] 0.0075[0.190] 0.0098[0.249] 0.0138[0.350] 0.0192[0.487] 51-85066-*C All product and company names mentioned in this document may be the trademarks of their respective holders. Document #: 38-07362 Rev. *B Page 6 of 7 © Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. [+] Feedback CY25818/19 Document History Page Document Title: CY25818/19 Spread Spectrum Clock Generator Document Number: 38-07362 REV. ECN NO. Issue Date Orig. of Change Description of Change ** 112462 03/21/02 OXC New Data Sheet *A 122701 12/28/02 RBI Added power up requirements to maximum rating information. *B 448097 See ECN RGL Add Lead-free devices Document #: 38-07362 Rev. *B Page 7 of 7 [+] Feedback