Omron MK3PV-5-S General purpose relay Datasheet

General Purpose Relay
MK
• Exceptionally reliable general purpose relay.
• Long life (minimum 100,000 electrical operations) assured
by silver contacts.
• Built-in operation indicator (mechanical, LED), diode surge
suppression, Varistor surge suppression.
• The contact operation can be easily checked by mechanical
indicator and/or push-to-test button options.
• Conforms to CENELEC standards.
• VDE approved versions available.
Ordering Information
To Order: Select the part number and add the desired coil voltage rating (e.g., MK3P5-S-AC120).
Type
Terminal
Coil
Contact form
Model
Mechanical
indicator
Standard
Plug-in
AC/DC
LED indicator
LED indicator and diode
LED indicator and varistor
Diode
DC
AC
DC
Varistor
AC
Mechanical indicator
& push-to-test button
DPDT
MK2P-I
MK2P-S
3PDT
MK3P-5-I
MK3P-5-S
DPDT
MK2PN-I
MK2PN-S
3PDT
MK3PN-5-I
MK3PN-5-S
DPDT
MK2PND-I
MK2PND-S
3PDT
MK3PND-5-I
MK3PND-5-S
DPDT
MK2PNV-I
MK2PNV-S
3PDT
MK3PNV-5-I
MK3PNV-5-S
DPDT
MK2PD-I
MK2PD-S
3PDT
MK3PD-5-I
MK3PD-5-S
DPDT
MK2PV-I
MK2PV-S
3PDT
MK3PV-5-I
MK3PV-5-S
Note: 1. Reverse polarity versions available on DC coil types. Consult your OMRON representative for further information.
2. VDE approved versions are available. Consult your OMRON representative for further information.
■ Accessories (Order separately)
To Order: Select the appropriate part numbers for sockets, clips, and mounting tracks (if required) from the available types chart.
Track Mounted Sockets
Relay type
Model
Socket
Relay hold-down clip
Mounting track/end plate
SPDT
DPDT
PF083A-E
PFC-A1
PFP-100N or PFP-50N and
PFP-M (end plate)
3PDT
PF113A-E
PFC-A1
PFP-100N or PFP-50N and
PFP-M (end plate)
General Purpose Relay
MK
1
■ Accessories (continued)
Back Connecting Sockets
Relay type
Model
Socket
PL08
PLE08-0
PL08-Q
PL11
PLE11-0
PL11-Q
SPDT
DPDT
3PDT
Relay hold-down clip
PLC-E
PLC-10
PLC-E
PLC-E
PLC-10
PLC-E
Specifications
■ Contact Data
Load
2 Pole
10 A at 250 VAC
10 A at 28 VDC
Rated load
Contact material
Carry current
Max. operating voltage
Max. operating current
Max. switching capacity
Ag
10 A
250 VAC, 250 VDC
10 A
2,500 VA
280 W
10 mA at 1 VDC
Min. permissible load
Resistive load (p.f. = 1)
3 Pole
10 A at 120 VAC
10 A at 28 VDC
10 A at 250 VAC
2,500 VA/1,250 VA (NO/NC contacts)
280 W
Inductive load (p.f. = 0.4)
7 A at 250 VAC
1,750 VA
■ Coil Data
AC
Rated
voltage
(VAC)
6
12
24
50
110
120
220
240
Rated
current (mA)
(at 60 Hz)
360
180
88.0
39.0
21.0
18.0
11.0
9.2
Coil
resistance
(Ω)
3.9
16.3
68.0
338
1240
1578
5090
6737
Coil inductance
(Ref. value) (H)
Armature OFF Armature ON
0.0423
0.0201
0.3270
0.1666
0.6940
0.3760
3.195
1.530
13.45
7.32
15.04
7.19
49.73
27.02
58.62
32.07
Pick-up
voltage
Dropout
Maximum
voltage
voltage
% of rated voltage
30% min.
110% max.
80% max.
Approx.
(at 60 Hz)
2.7 VA
25% min.
(at 50 Hz)
Power
consumption
(mW)
Approx.
2.3 VA
(at 60 Hz)
Approx.
2.7 VA
(at 50 Hz)
DC
Rated
voltage
(VDC)
6
12
24
48
110
Rated
current (mA)
(at 60 Hz)
255
126
56
29.5
15.1
Coil
resistance
(Ω)
23.5
95
430
1630
7300
Coil inductance
(Ref. value) (H)
Armature OFF Armature ON
0.206
0.106
0.963
0.449
4.915
2.478
16.685
10.487
80.2
42.6
Pick-up
voltage
Dropout
Maximum
voltage
voltage
% of rated voltage
80% max.
15% min.
110% max.
Approx.
2.7 VA
Power
consumption
(mW)
Approx.
1.5 W
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±15% for DC rated current
and +15%, -20% for AC rated current.
2. The rated current is reference value.
3. Performance characteristic data are measured at a coil temperature of 23°C (73°F).
4. For models with the LED indicator built-in, add an LED current of approximately 0 thru 5 mA to the rated current.
2
General Purpose Relay MK
■ Characteristics
Contact resistance
50 mΩ max.
Operate time
AC: 20 ms max. DC: 30 ms max.
Release time
20 ms max.
Operating frequency
Mechanical
18,000 operations/hour
Electrical
1,800 operations/hour (under rated load)
Insulation resistance
100 MΩ min. (at 500 VDC)
Dielectric strength
2,500 VAC, 50/60 Hz for 1 minute between coil and contacts
1,000 VAC, 50/60 Hz for 1 minute between contacts of same poles, between
terminals of the same polarity
2,500 VAC, 50/60 Hz for 1 minute between current-carrying parts, noncurrentcarrying parts, and terminals of opposite polarity
Vibration
Mechanical durability
10 to 55 Hz, 1.50 mm (0.06 in) double amplitude
Malfunction durability 10 to 55 Hz, 1.00 mm (0.04 in) double amplitude
Shock
Mechanical durability
1,000 m/s2 (approx. 100 G)
Malfunction durability 100 m/s2 (approx. 10 G)
Ambient temperature
Operation: -10° to 40°C (14° to 104°F)
Humidity
Service Life
35 to 85% RH
Mechanical
10 million operations min. (at operating frequency of 18,000 operations/hour)
Electrical
100,000 operations at rated load (at operating frequency of 1,800 operations/hour)
Weight
Approx. 85 g (3.0 oz)
Note: Data shown are of initial value.
■ Characteristic Data
Electrical service life
MK2P-S, MK3P5-S
Rated operating current (A)
Service life (x106 operations)
Maximum switching capacity
MK2P-S
Rated operating voltage (V)
Rated operating current (A)
General Purpose Relay
MK
3
Dimensions
Unit: mm (inch)
■ Relays
■ Terminal Arrangement (Bottom view)
Standard type (AC/DC coil)
MK2P-I, -S
MK3P5-I, -S
LED indicator type (AC coil)
MK2PN-I, -S
MK3PN-5-I, -S
LED indicator type (DC coil)
MK2PN-I, -S
MK3PN-5-I, -S
Diode type (DC coil)
MK2PD-I, -S
MK3PD-5-I, -S
Varsitor type (AC coil)
MK2PV-I, -S
MK3PV-5-I, -S
LED indicator and diode type (DC coil)
MK2PND-I, -S
MK3PND-5-I, -S
LED indicator and Varsitor type (AC coil)
MK2PNV-I, -S
MK3PNV-5-I, -S
4
General Purpose Relay MK
■ Accessories
Track mounted socket
PF083A-E (conforming to DIN EN 50022)
Terminal
arrangement
Mounting
holes
Mounting dimensions
of relay with socket
Mounting
holes
Mounting dimensions
of relay with socket
Note: Model PF083A-E can be used as a front connecting socket.
Track mounted socket
PF113A-E (conforming to DIN EN 50022)
Terminal
arrangement
Note: Model PF113A-E can be used as a front connecting socket.
Back connecting socket
MK2 sockets (8 pin)
Printed circuit
board socket
PL08 (UL File No. E87929)
Solder terminals
PL08-Q
Wire wrap terminals
PLE08-0
Mounting holes
PL08
PL08 type sockets and MK2 relay
Total height dimension
Recommended PCB layout
PLE08-0
General Purpose Relay
MK
5
Unit: mm (inch)
Back connecting socket
MK3 sockets (11 pin)
Printed circuit
board socket
PL11 (UL File No. E87929)
Solder terminals
PL11-Q
Wire wrap terminals
PLE11-0
Mounting holes
PL11
PL11 type sockets and MK3 relay
Total height dimension
Recommended PCB layout
PLE11-0
Mounting tracks
PFP-100N/PFP-50N
(conforming to DIN EN 500022
PFP-100N2
(conforming to DIN EN 500022)
Note: 1. *This dimension applies to mounting track PFP-50N.
2. A total of twelve 25 x 4.50 mm (0.98 x 0.18 in) elliptic holes is provided with six holes cut from each rail end at a pitch of
10 mm (0.39 in) holes.
PFP-M end plate
Note: Use of Type PFP-M end plate is recommended to secure the socket on the mounting track. Be sure that the engraved arrow
mark on the surface of the end plate faces upward and then tighten the screw firmly with a screwdriver.
6
General Purpose Relay MK
■ Approvals
UL (File No. E41515)/CSA (File Nos. LR41408 and LR335535)
Type
MK2P-I, -S
Contact form
DPDT
Coil ratings
6 to 250 VAC
6 to 110 VDC
Contact ratings
10 A, 250 VAC, Resistive
10 A, 28 VDC, Resistive
7 A, 250 VAC, Inductive
MK3P5-I, -S
3PDT
6 to 250 VAC
6 to 110 VDC
10 A, 120 VAC, Resistive
10 A, 28 VDC, Resistive
10 A, 250 VAC, Resistive
7 A, 250 VAC, Inductive
SEV, DEMKO
Type
MK2P-I, -S
Contact form
DPDT
Coil ratings
6 to 110 VDC
Contact ratings
10 A, 250 VAC (NO) (cosø = 1)
5 A, 250 VAC (NC) (cosø = 1)
10 A, 280 VDC (NO)
MK3P5-I, -S
3PDT
6 to 240 VAC
5 A, 280 VDC (NC)
7 A, 250 VAC (cosø = 0.4)
TUV (File No. R9051410)
Type
MK2P-I, -S
Contact form
DPDT
Coil ratings
6, 12, 24, 48,
100, 110 VDC
Contact ratings
10 A, 250 VAC (NO) (cosø = 1)
5 A, 250 VAC (NC) (cosø = 1)
10 A, 280 VDC (NO)
MK3P5-I, -S
3PDT
6, 12, 24, 50,
110, 115, 120,
200, 220, 230,
240 VAC
5 A, 280 VDC (NC)
7 A, 250 VAC (cosø = 0.4)
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics
individually defined in this catalog.
2. VDE, Nemko and Semko versions are available. Please consult your OMRON representative for further information.
3. In the interest of product improvement, specifications are subject to change.
General Purpose Relay
MK
7
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at time of shipment. Payments for Products
received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no
right to set off any amounts against the amount owing in respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real property
and income taxes), including any interest or penalties thereon, imposed directly or
indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall
be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel any
unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products shall
pass from Seller to Buyer, provided that Seller shall retain a security interest in the
Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier must be presented in detail in writing to Seller
within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
8
General Purpose Relay MK
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
handled, stored, installed and maintained and not subject to contamination, abuse,
misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses ( including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and description may be changed at any
time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c)disclosure to
non-citizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal
and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's
programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
General Purpose Relay
MK
9
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. J01C-E-01
10
01/07
General Purpose Relay MK
Specifications subject to change without notice
Printed in USA
Similar pages