3.0x1.0 mm RIGHT ANGLE INFRARED EMITING DIODE Part Number: APA3010SF4C Features Description z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm SF4 Made with Gallium Aluminum Arsenide Infrared THICKNESS. Emitting diodes. z MECHANICALLY AND SPECTRALLY MATCHED TO PHOTOTRANSISTOR. z WATER CLEAR LENS. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC4380 REV NO: V.7 DATE: MAY/08/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203000623 Selection Guide Part No. APA3010SF4C Dice Po (mW/sr) [2] @ 20mA Lens Type SF4 (GaAIAs) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 0.4 1 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength SF4 λP 880 nm IF=20mA Spectral Bandwidth SF4 Δλ1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Symbol SF4 Units Power dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C TSTG -40 To +85 °C Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC4380 REV NO: V.7 DATE: MAY/08/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203000623 APA3010SF4C SPEC NO: DSAC4380 REV NO: V.7 DATE: MAY/08/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203000623 APA3010SF4C Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAC4380 REV NO: V.7 DATE: MAY/08/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203000623 PACKING & LABEL SPECIFICATIONS APA3010SF4C SPEC NO: DSAC4380 REV NO: V.7 DATE: MAY/08/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203000623