48 ALP/T22 SERIES Board Mounting or Solder Tag Terminations This range of Long Life grade capacitors features a Capacitance range ................. 47µF to 150,000µF very high CV per unit volume with low e.s.r. and Capacitance tolerance ............ ±20% impedance values and high ripple currents. Voltage range ......................... 10V to 450V d.c. They are ideally suited for use in industrial and Temperature range ................. -40°C to +85°C commercial applications such as switch mode Case sizes ............................... 25 x 35mm to 40 x 105mm power supplies and energy storage circuits. ALT Tag style ALP Pin style ALP/T22 SERIES ALT23 Stud Mounting ALP Pin configurations 25mm dia can DIMENSIONS (sleeved) mm 30mm dia can Hole 1 represents +ve 35mm dia can 40mm dia can CASE CODE AA AB BB CB CD DB DD DE DF D ±1 25 25 30 35 35 40 40 40 40 L ±2 35 45 45 45 55 45 55 75 105 MOUNTING CLIP FOR ALT STYLE V2/H1 V2/H1 V3/H2 V3/H2 V9 V9 V9 V9 Max torque: stud M8:4NM Terminations and Mounting ALT styles are designed for flying lead connection. ALP styles are designed for printed circuit board mounting to DIN 41238. For details see page 51. For details of mounting clips and stud mounting kits see page 68/69. BHC Aerovox LTD. -ALUMINIUM ELECTROLYTIC CAPACI TORS 49 ALP/T22 SERIES Board Mounting or Solder Tag Terminations TECHNICAL DATA Related documents TEMPERATURE CORRECTION For ambient temperatures other than 85°C the following correction factors should be employed. DIN 41240 & 41238 & 414916-7 IEC 384-4 AMBIENT TEMPERATURE 30°C 50°C 70°C 85°C Temperature range Storage -55°C to +85°C Operating -40°C to +85°C Environmental classification 40/085/56 Surge voltage 1000 surges (30 seconds) at 85°C with surge voltage applied. See electrical characteristics. FACTOR 2.5 2.1 1.6 1.0 N.B. The sum of the d.c. and a.c. voltage components should not exceed the d.c. voltage rating. Life expectancy 6 10 cycles at 25°C and rated voltage. One cycle per second with a time constant of 0.1. D.C. leakage current After application of rated d.c. voltage for 5 minutes at 20°C, the d.c. leakage current shall not exceed (0.006 CR UR +4) µA. Where C R is the rated capacitance in µF and UR is the rated d.c. voltage. Vibration 10Hz to 500Hz at 0.75mm or 10g for 3x2hrs duration. At rated temperature with rated voltage and ripple current applied. CAN DIAMETER (mm) LIFE EXPECTANCY (hours) 25 12000 30 15000 35 18000 40 26000 Capacitor marking The capacitors are marked with items 1 to 6 from the following list as a minimum, and as much of the remaining information as is practical. 1. 2. 3. 4. 5. 6. 7. Insulation resistance > 100MΩ at 100V d.c., across insulating sleeve. Voltage proof > 2500V d.c., across insulating sleeve. Rated capacitance in µF Rated voltage d.c. Polarity of terminations Tolerance on rated capacitance Date code/Batch code BHC part number Environmental classification Ripple current The following values are approximate only, to give an indication of the effects of frequency and temperature on ripple current. More accurate data can be obtained by referring to the Application Notes available from BHC Aerovox. FREQUENCY CORRECTION Capacitors shall withstand the rated r.m.s. ripple current as given in the tables at upper category temperature in circulating air. For frequencies other than those shown the following multipliers should be applied to the 100Hz ripple current. RATED VOLTAGE d.c. 50 0 - 25 0.89 40 - 160 0.81 200 - 450 0.75 BHC Aerovox FREQUENCY (Hz) 100 500 1.0 1.05 1.0 1.28 1.0 1.54 LTD. 1k 1.06 1.33 1.70 Ordering information For details of ordering see page 70. >10k 1.07 1.39 1.89 -ALUMINIUM ELECTROLYTIC CAPACI TORS ALP/T22 SERIES Charge/discharge 50 ALP/T22 SERIES Rated voltage Cap µF Case Size Ω at 20°C ESR mΩ 100Hz Ω Impedance mΩ at 20 °C,10 KHz Ripple current A at 85°C 100 Hz 10V d.c. (11.5V surge) 10000 15000 22000 33000 47000 47000 68000 100000 150000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 75 51 43 40 31 39 30 22 15 67 45 39 37 29 36 28 20 14 2.54 3.39 4.13 4.73 5.78 5.22 6.39 8.39 11.67 AL-22A103AA010 AL-22A153AB010 AL-22A223BB010 AL-22A333CB010 AL-22A473CD010 AL-22A473DB010 AL-22A683DD010 AL-22A104DE010 AL-22A154DF010 16V d.c. (18.5V surge) 6800 10000 15000 22000 33000 33000 47000 68000 100000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 79 54 45 41 32 40 31 22 16 69 48 40 37 29 37 29 21 15 2.48 3.30 4.04 4.67 5.69 5.15 6.29 8.39 11.30 AL-22A682AA016 AL-22A103AB016 AL-22A153BB016 AL-22A223CB016 AL-22A333CD016 AL-22A333DB016 AL-22A473DD016 AL-22A683DE016 AL-22A104DF016 25V d.c. (28.5V surge) 4700 6800 10000 15000 22000 22000 33000 47000 68000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 82 57 50 48 37 48 37 26 18 73 50 45 44 34 44 34 24 17 2.43 3.21 3.83 4.31 5.29 4.70 5.75 7.73 10.65 AL-22A472AA025 AL-22A682AB025 AL-22A103BB025 AL-22A153CB025 AL-22A223CD025 AL-22A223DB025 AL-22A333DD025 AL-22A473DE025 AL-22A683DF025 40V d.c (46V surge) 3300 4700 6800 10000 15000 15000 22000 33000 47000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 82 57 52 50 39 50 39 27 19 72 50 46 45 36 45 36 25 17 2.43 3.21 3.76 4.23 5.15 4.61 5.60 7.58 10.37 AL-22A332AA040 AL-22A472AB040 AL-22A682BB040 AL-22A103CB040 AL-22A153CD040 AL-22A153DB040 AL-22A223DD040 AL-22A333DE040 AL-22A473DF040 63V d.c. (72.5V surge) 2200 3300 4700 6800 10000 10000 10000 15000 22000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 87 58 55 54 42 54 42 30 20 75 51 49 49 38 48 38 27 18 2.36 3.18 3.65 4.07 4.97 4.43 5.40 7.19 10.11 AL-22A222AA063 AL-22A332AB063 AL-22A472BB063 AL-22A682CB063 AL-22A103CD063 AL-22A103DB063 AL-22A103DD063 AL-22A153DE063 AL-22A223DF063 100V d.c. (115V surge) ALP/T22 SERIES Board Mounting or Solder Tag Terminations 680 1000 1500 2200 3300 3300 4700 6800 10000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 225 153 116 97 72 89 68 47 32 185 126 98 84 63 79 61 42 28 1.47 1.96 2.52 3.03 3.79 3.45 4.24 5.75 7.99 AL-22A681AA100 AL-22A102AB100 AL-22A152BB100 AL-22A222CB100 AL-22A332CD100 AL-22A332DB100 AL-22A472DD100 AL-22A682DE100 AL-22A103DF100 Type number (Excluding style ref) Note: Values of E.S.R. and Impedance quoted above are maximum BHC Aerovox LTD. -ALUMINIUM ELECTROLYTIC CAPACI TORS 51 ALP/T22 SERIES Rated voltage Cap µF Case Size Ω at 20°C ESR mΩ 100Hz Ω Impedance mΩ at 20 °C,10 KHz Ripple current A at 85°C 100 Hz 200V d.c. (230 surge) 150 220 330 470 680 680 1000 1500 2200 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 424 289 208 165 121 140 104 71 48 321 219 161 132 97 116 87 59 40 1.07 1.43 1.88 2.84 3.58 3.34 4.19 5.71 7.95 AL-22A151AA200 AL-22A221AB200 AL-22A331BB200 AL-22A471CB200 AL-22A681CD200 AL-22A681DB200 AL-22A102DD200 AL-22A152DE200 AL-22A222DF200 250V d.c. (287V surge) 100 150 220 330 470 470 680 1000 1500 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 859 573 405 290 209 229 166 113 76 661 441 315 230 167 186 137 93 62 0.75 1.01 1.35 2.14 2.72 2.62 3.32 4.53 6.32 AL-22A101AA250 AL-22A151AB250 AL-22A221BB250 AL-22A331CB250 AL-22A471CD250 AL-22A471DB250 AL-22A681DD250 AL-22A102DE250 AL-22A152DF250 385V d.c. (425V surge) 68 100 150 220 330 330 470 680 1000 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 1914 1301 884 625 426 450 324 223 151 1417 964 659 471 324 347 252 173 117 0.50 0.67 0.91 1.46 1.90 1.88 2.37 3.22 4.49 AL-22A680AA385 AL-22A101AB385 AL-22A151BB385 AL-22A221CB385 AL-22A331CD385 AL-22A331DB385 AL-22A471DD385 AL-22A681DE385 AL-22A102DF385 450V d.c. (495V surge) Board Mounting or Solder Tag Terminations 47 68 100 150 220 220 330 470 680 25x35 25x45 30x45 35x45 35x55 40x45 40x55 40x75 40x105 4180 2890 1980 1330 910 940 630 440 300 3020 2085 1430 970 665 686 466 322 222 0.34 0.45 0.61 1.00 1.31 1.31 1.70 2.29 3.18 ALP22A470AA450 ALP22A680AB450 ALP22A101BB450 ALP22A151CB450 ALP22A221CD450 ALP22A221DB450 ALP22A331DD450 ALP22A471DE450 ALP22A681DF450 Note: Values of E.S.R. and Impedance quoted above are maximum ALP Mounting (DIN 41238) 25mm dia can 30mm dia can Additional dummy pins are provided for stability. Note that the case and dummy pins may be at negative terminal potential. (Printed circuit board hole positions). Viewed from component side. BHC Aerovox LTD. 35mm dia can 40mm dia can Connections Hole 1 represents +ve Hole 5 represents -ve Terminals 2,3 and 4 may be at negative terminal potential due to the presence of electrolyte. They are intended for mechanical connections only. It is recommended that they are soldered to the printed circuit board. -ALUMINIUM ELECTROLYTIC CAPACI TORS ALP/T22 SERIES Type number (Excluding style ref)