KODENSHI DN030S Extremely low collector-to-emitter saturation voltage Datasheet

DN030S
NPN Silicon Transistor
Features
• Extremely low collector-to-emitter
saturation voltage
( VCE(SAT)= 0.1V Typ. @IC/IB=100mA/10mA)
• Suitable for low voltage large current drivers
• Complementary pair with DP030S
• Switching Application
PIN Connection
3
1
2
Ordering Information
Type NO.
DN030S
Marking
N01 □
SOT-23F
Package Code
① ②
① Device Code ② Year&Week Code
SOT-23F
Absolute maximum ratings
(Ta=25°C)
Characteristic
Symbol
Ratings
Unit
Collector-Base voltage
VCBO
15
V
Collector-Emitter voltage
VCEO
12
V
Emitter-Base voltage
VEBO
5
V
Collector current
IC
300
mA
Collector dissipation
PC
200
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg
-55~150
°C
Electrical Characteristics
Characteristic
(Ta=25°C)
Symbol
Test Condition
Min. Typ. Max.
Unit
Collector-Base breakdown voltage
BVCBO
IC=50μA, IE=0
15
-
-
V
Collector-Emitter breakdown voltage
BVCEO
IC=1mA, IB=0
12
-
-
V
Emitter-Base breakdown voltage
BVEBO
IE=50μA, IC=0
5
-
-
V
Collector cut-off current
ICBO
VCB=12V, IE=0
-
-
0.1
μA
Emitter cut-off current
IEBO
VEB=5V, IC=0
-
-
0.1
μA
hFE1
VCE=1V, IC=100mA
200
-
450
-
hFE2
VCE=1V, IC=300mA
70
-
-
-
DC current gain
Collector-Emitter saturation voltage
Base-Emitter saturation voltage
Transition frequency
Collector output capacitance
VCE(sat1)
IC=100mA, IB=10mA
-
-
0.2
V
VCE(sat2)
IC=300mA, IB=30mA
-
-
0.5
V
VBE(sat1)
IC=100mA, IB=10mA
-
-
1.2
V
VBE(sat2)
IC=300mA, IB=30mA
-
-
1.7
V
VCE=5V, IC=10mA
-
300
-
MHz
VCB=10V, IE=0, f=1MHz
-
3
-
PF
fT
Cob
KSD-T5C008-000
1
DN030S
Electrical Characteristic Curves
Fig. 1 PC - Ta
Fig. 3 hFE - IC
Fig. 2 IC -VBE
Fig. 4 IC - VCE
`
Fig. 5 VCE(sat) - IC
KSD-T5C008-000
2
DN030S
Outline Dimension
※Recommend PCB solder land [Unit: mm]
KSD-T5C008-000
3
DN030S
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-T5C008-000
4
Similar pages