Medical PSU FSP030-REAM DESCRIPTION This series of AC /DC switching power supplies are for 2530 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide casewith an inlet of the IEC 320/C 14 to mate with interchangeable cord for worldwide use. All models meet EN55011 and FC C class B emission limits, and are designed for medical applications, not for life-supporting equipment. FEATURES Interchangeable AC plugs High efficiency Low ripple & noise Over voltage protection Short-circuit protection 100% burn-in at full rated load Standby consumption less than 0.3 W C ompliant with C EC and ENERGY STAR efficiency level V requirements C ompliant with RoHS requirements W ATTAGE Wattage: OUTPUT SPECIFICATION Ripple & Noise: Over Current Protection: 117.8mm(L) x 49.8mm(W) x 32.0mm(H) ENVIRONMENTAL SPECIFICATION TEMP.Range: INPUT SPECIFICATION Input Range: Input Frequency: Input Current: Leakage Current: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change All models protected to shortcircuit conditions 30W DIMENSION Dimension: SAFETY STANDARD APPAOVAL 90-264 Vdc 47-63 Hz 1.0A(rms) for115VAC , 0.6A(rms) for230VAC 100 µA max. @ 264 VAC ,63 Hz Operating Temperature:0°C to +40°C Storage Temperature: -40°C to + 85℃ OUTPUT ELECTRICAL Single Output: 18 V/ 1.66 A NOTES 1. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. MECHANICAL SPECIFICATION This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice