BR1005 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS BR1010 TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 10 Amperes FEATURES * Surge overload rating: 200 Amperes peak * Low forward voltage drop BR-8/10 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202, Method 208 guaranteed Polarity: Symbols molded or marked on body Mounting position: Any Weight: 6.9 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL BR1005 BR101 BR102 BR104 BR106 BR108 BR1010 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage o Maximum Average Forward Rectified Output Current at Tc = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave 10 Amps IFSM 200 Amps VF 1.1 Volts superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 5.0A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T C = 100 oC Volts IO 10 IR uAmps 500 I 2t Rating for Fusing (t<8.3ms) I2t 166 Typical Junction Capacitance ( Note1) CJ 200 RθJ A 21 TJ -55 to + 125 0 -55 to + 150 0 Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range T STG A 2 Sec pF 0 C/W C C NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads. 240 NEXT NEXT NEXT EXIT BACK BACK EX BACK EXIT RATING AND CHARACTERISTIC CURVES (BR1005 THRU BR1010) Si at- He nk u Mo PC d ng ar nti Bo M ou nt in g DC COMPONENTS CO., LTD. R 241 NEXT NEXT NEXT EXIT BACK BACK EX BACK EXIT