L2F1 thru L2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A Features • • • • • • • • Glass passivated fast recovery rectifiers Ideal for automated placement Low forward voltage drop Low leakage currentt L l k Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile， typical thickness 1.0mm AEC-Q101 qualified eSGB (SMAF) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies, and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol L2F1 L2F2 L2F3 L2F4 L2F5 L2F6 L2F7 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 60 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Test Conditions Symbol Maximum instantaneous forward voltage IF=2 A,TA=25℃ time Irr=0.25A Typical junction capacitance Typical thermal resistance 1) 4.0 V, 1 MHz juntion to mount 100 70 100 200 140 200 400 280 400 20 2.0 600 420 600 800 560 800 1000 700 1000 V V V A (TA = 25 °C unless otherwise noted) Parameter Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=125℃ TA 125℃ IF=0.5A,IR=1.0A, Maximum reverse recovery 50 35 50 L2F1 L2F2 L2F3 L2F4 L2F5 L2F6 L2F7 Unit 1.3 V VF 5 IR trr µA 50 150 250 500 nS CJ 11 pF RθJM 12 ℃/W Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2013.12-Rev.A L2F1 thru L2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Typical Reverse Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2013.12-Rev.A L2F1 thru L2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A Package Outline Dimensions DIM Unit: mm MIN MAX Unit: inch MIN MAX A 0 92 0.92 1 08 1.08 0 036 0.036 0 043 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint Packing Information Packing quantities: Reel size 7" 13" Quantity/reel 3K 10K Quantity/inner Box 21K 20K Quantity/Carton 84K 180K Tape & Reel Specification www.goodark.com 3/4 2013.12-Rev.A L2F1 thru L2F7 Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou GoodGood Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou GoodArk Electronics Co., Ltd. for the latest product information before purchasing a product listed herein The information described here may herein. ma contain technical inaccuracies inacc racies or typographical t pographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior Th i written itt approvall off Suzhou S h Good-Ark G d A k Electronics El t i Co., C Ltd. Ltd is i necessary to t reprint i t or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2013.12-Rev.A