SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip MHB - High heat resistance, 125℃ Upgrade! Series ・ESR : Less than MVH ・Endurance : 1,500 to 3,000 hours at 125℃ ・Rated voltage range : 10 to 100V ・Nominal capacitance range : 47 to 3,300µF ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・Vibration resistant structure ・RoHS Compliant MHB Lower ESR MVH P94 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. impedance Ratio) Endurance -40 to +125℃ 10 to 100Vdc (at 20℃, 120Hz) ±20%(M) HA0 & JA0 I=0.01CV KE0 to MN0 I=0.03CV (at 20℃ after 2 minutes) Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated Voltage (Vdc) 10V 16V 25V 35V 50V 63V 80V 100V − − − − HA0 & JA0 0.24 0.20 0.16 0.14 tanδ (Max.) − − KE0 to MN0 0.14 0.12 0.10 0.10 0.08 0.08 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz) 10V 16V 25V 35V 50V 63V 80V 100V Rated Voltage (Vdc) Z(-25℃)/Z(+20℃) − − − − 3 2 2 2 HA0 & JA0 Z(-40℃)/Z(+20℃) − − − − 4 3 3 3 2 2 Z(-25℃)/Z(+20℃) − − 2 2 2 2 KE0 to MN0 Z(-40℃)/Z(+20℃) (at 120Hz) 4 4 − − 4 4 4 4 The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 2,000. hours at 125℃. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 125℃. HA0 & JA0 KE0 & KG5 ：1,500hours LH0 & MH0 ：2,000hours KN0 & LN0 & MN0：3,000hours Time KE0 to MN0 Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±30% of the initial value D.F. (tanδ) ≦300% of the initial specified value Leakage current ≦The initial specified value Shelf Life ◆DIMENSIONS [mm] ● Terminal Code : A ● Size code : HA0 to MN0 Code : G(Vibration resistant structure) ● Size code : HA0 to MN0 Size code 0.3max. L±0.5 φD±0.5 P C±0.2 B±0.2 φD±0.5 W 0.3max. A±0.2 L±0.5 A±0.2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 φD 8 10 12.5 12.5 12.5 16 16 18 18 L 10.0 10.0 13.5 16.0 21.5 16.5 21.5 16.5 21.5 A 8.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 B 8.3 10.3 13.0 13.0 13.0 17.0 17.0 19.0 19.0 C 9.0 11.0 13.7 13.7 13.7 18.0 18.0 20.0 20.0 W 0.7 to 1.1 0.7 to 1.1 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 1.0 to 1.3 P 3.1 4.5 4.2 4.2 4.2 6.5 6.5 6.5 6.5 : Dummy terminals ◆PART NUMBERING SYSTEM 1 HA0 JA0 KE0 KG5 KN0 LH0 LN0 MH0 MN0 W P C±0.2 Vent (Except HA0) B±0.2 Vent (Except HA0) ● Terminal ◆MARKING 18 KE0 to MN0 EX) 35V1,000µF HA0, JA0 EX) 16V220µF E MHB AAA A DA AAA M AAA G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470,100µF:101) Taping·Tray code Terminal code (A, G) Voltage code (ex. 35V:350,100V:101) Series code Category 2A MHB 5J 1000 35V 220 CHB ●Rated voltage symbol (HA0, JA0) Rated voltage (Vdc) Symbol Please refer to "Product code guide (surface mount type)" 10 A 16 C 25 E 35 V Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 98 CAT. No. E1001N SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS TM AIchip Low impedance, 105℃ MHBSeries Upgrade! - ◆STANDARD RATINGS WV (Vdc) 10 16 25 35 50 63 80 100 Cap (µF) Size code 330 470 100 220 100 220 330 820 1,100 (1,500) 1,600 2,200 2,700 3,300 47 100 100 220 560 680 (910) 1,000 1,300 1,600 2,200 270 360 (470) 510 680 820 1,100 200 270 (330) 360 470 560 750 130 160 (220) 240 330 390 510 75 100 (130) 130 180 220 300 HA0 JA0 HA0 HA0 HA0 HA0 JA0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 HA0 HA0 JA0 JA0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 KE0 KG5 (KN0) LH0 MH0 LN0 MN0 ESR(Initial) ( Ω max/100k to 400kHz) 20℃ 0.3 0.2 0.3 0.3 0.3 0.3 0.2 0.060 0.056 (0.044) 0.047 0.045 0.034 0.032 0.3 0.3 0.2 0.2 0.060 0.056 (0.044) 0.047 0.045 0.034 0.032 0.11 0.10 (0.076) 0.087 0.087 0.050 0.050 0.22 0.17 (0.13) 0.15 0.12 0.085 0.070 0.22 0.17 (0.13) 0.15 0.12 0.085 0.070 0.28 0.21 (0.17) 0.18 0.15 0.11 0.091 -40℃ 3.0 2.0 3.0 3.0 3.0 3.0 2.0 0.30 0.28 (0.22) 0.24 0.23 0.17 0.16 3.0 3.0 2.0 2.0 0.30 0.28 (0.22) 0.24 0.23 0.17 0.16 0.55 0.50 (0.38) 0.44 0.44 0.25 0.25 1.54 1.19 (0.94) 1.05 0.84 0.58 0.49 1.54 1.19 (0.94) 1.05 0.84 0.58 0.49 2.24 1.68 (1.32) 1.44 1.20 0.88 0.73 ESR(End of life) ( Ω max) 100kHz 400kHz 20℃ -40℃ -40℃ – – 6.0 – – 4.5 – – 6.0 – – 6.0 – – 6.0 – – 6.0 – – 4.5 0.30 3.7 – 0.28 3.4 – (0.18) (2.2) – 0.24 2.9 – 0.23 2.8 – 0.10 1.3 – 0.090 0.60 – – – 6.0 – – 6.0 – – 4.5 – – 4.5 0.30 3.7 – 0.28 3.4 – (0.18) (2.2) – 0.24 2.9 – 0.23 2.8 – 0.10 1.3 – 0.090 0.60 – 0.55 6.6 – 0.50 6.0 – (0.38) (4.6) – 0.44 5.2 – 0.44 5.2 – 0.25 3.0 – 0.25 3.0 – 0.88 14 – 0.68 11 – (0.53) (8.5) – 0.60 9.6 – 0.48 7.7 – 0.19 3.0 – 0.19 3.0 – 0.88 14 – 0.68 11 – (0.53) (8.5) – 0.60 9.6 – 0.48 7.7 – 0.19 3.0 – 0.19 3.0 – 1.1 22 – 0.84 17 – (0.66) (13) – 0.72 14 – 0.60 12 – 0.25 3.9 – 0.22 3.9 – Rated ripple current (mArms/125℃ , 100k to 400kHz) Part No. 240 330 240 240 240 240 330 1,320 1,470 (1,620) 1,820 2,000 2,280 2,490 240 240 330 330 1,320 1,470 (1,620) 1,820 2,000 2,280 2,490 980 1,090 (1,200) 1,320 1,420 2,040 2,240 540 650 (830) 780 940 1,790 1,910 540 650 (830) 780 940 1,790 1,910 480 580 (740) 720 840 1,580 1,690 EMHB100ADA331MHA0G EMHB100ADA471MJA0G EMHB160ADA101MHA0G EMHB160ADA221MHA0G EMHB250ADA101MHA0G EMHB250ADA221MHA0G EMHB250ADA331MJA0G EMHB250ARA821MKE0S EMHB250ARA112MKG5S (EMHB250ATR152MKN0S) EMHB250 □ DA162MLH0S EMHB250 □ DA222MMH0S EMHB250 □ DA272MLN0S EMHB250 □ DA332MMN0S EMHB350ADA470MHA0G EMHB350ADA101MHA0G EMHB350ADA101MJA0G EMHB350ADA221MJA0G EMHB350ARA561MKE0S EMHB350ARA681MKG5S (EMHB350ATR911MKN0S) EMHB350 □ DA102MLH0S EMHB350 □ DA132MMH0S EMHB350 □ DA162MLN0S EMHB350 □ DA222MMN0S EMHB500ARA271MKE0S EMHB500ARA361MKG5S (EMHB500ATR471MKN0S) EMHB500 □ DA511MLH0S EMHB500 □ DA681MMH0S EMHB500 □ DA821MLN0S EMHB500 □ DA112MMN0S EMHB630ARA201MKE0S EMHB630ARA271MKG5S (EMHB630ATR331MKN0S) EMHB630 □ DA361MLH0S EMHB630 □ DA471MMH0S EMHB630 □ DA561MLN0S EMHB630 □ DA751MMN0S EMHB800ARA131MKE0S EMHB800ARA161MKG5S (EMHB800ATR221MKN0S) EMHB800 □ DA241MLH0S EMHB800 □ DA331MMH0S EMHB800 □ DA391MLN0S EMHB800 □ DA511MMN0S EMHB101ARA750MKE0S EMHB101ARA101MKG5S (EMHB101ATR131MKN0S) EMHB101 □ DA131MLH0S EMHB101 □ DA181MMH0S EMHB101 □ DA221MLN0S EMHB101 □ DA301MMN0S □ : Enter the appropriate terminal code. ( ) :Second standard ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Size code HA0 to JA0 KE0 to MN0 Frequency(Hz) Capacitance(μF) 47 to 470 75 to 200 220 to 560 680 to 1,600 2,200 to 3,300 120 1k 10k 100k 0.93 0.40 0.50 0.60 0.75 0.97 0.75 0.85 0.87 0.90 1.00 0.90 0.94 0.95 0.95 1.00 1.00 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 99 CAT. No. E1001N