Omron A6H-0102-P Half-pitch dip switch Datasheet

Half-pitch DIP Switch
A6H
Ultra-low Profile, Half-pitch,
Surface-mounting DIP Switch
■ Very low profile of 1.55 mm.
■ Mounting space reduced by 63%
(compared with conventional models).
■ Washable, seal tape models available.
■ Embossed taping models available.
(SQ reel (small reel) also available)
RoHS Compliant
(Refer to page 8 for details.)
Ordering Information
Type
Standard models
Stick models
No. of poles
Models with seal tape
Embossed taping
Small reel
(units of 500)
(See note.)
Stick models
Embossed taping
Standard reel
(units of 4,000)
(See note.)
Small reel
(units of 500)
(See note.)
Quantity per
stick
4
75
A6H-4101
A6H-4101-PM
A6H-4102
A6H-4102-P
A6H-4102-PM
6
54
A6H-6101
A6H-6101-PM
A6H-6102
A6H-6102-P
A6H-6102-PM
8
40
A6H-8101
A6H-8101-PM
A6H-8102
A6H-8102-P
A6H-8102-PM
10
33
A6H-0101
A6H-0101-PM
A6H-0102
A6H-0102-P
A6H-0102-PM
Note:
Embossed taping models are packaged in units of 500 or 4,000. Orders must be made in multiples of either 500 or 4,000. Switches
are not sold individually.
Specifications
■
Ratings/Characteristics
Switching capacity
25 mA at 24 VDC
10 µA (minimum current) at 3.5 VDC
Ambient temperature
Operating:
Storage:
–20 to 70°C (with no icing or condensation)
–40 to 80°C (with no icing or condensation)
Ambient humidity
Operating:
35% to 90%
Insulation resistance
100 MΩ min. (at 250 VDC)
Contact resistance
200 mΩ max. (initial value)
Dielectric strength
300 VAC for 1 min between terminals of the same polarity, and between terminals of different
polarity
Vibration resistance
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Malfunction: 300 m/s2 min.
Life expectancy
Mechanical: 1,000 operations min.
Electrical:
1,000 operations min.
Operating force
0.29 to 4.9 N {30 to 500 gf}
Enclosure rating
Equivalent to IP40
Weight
0.09 g (4 poles)
0.12 g (6 poles)
0.15 g (8 poles)
0.18 g (10 poles)
9
A6H
A6H
Dimensions
Note:
1. All units are in millimeters unless otherwise indicated.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Standard
A6H-@101
Dimensions of PCB pad
(Top View)
Standard
With seal tape
Seal tape (t=0.05)
With Seal Tape
P = No. of poles
A6H-@102
A6H-@102-P
No. of poles
4
6
8
10
Model
A6H-4101
A6H-6101
A6H-8101
A6H-0101
A6H-4102
A6H-6102
A6H-8102
A6H-0102
Dimension A
6.31
8.85
11.39
13.93
Installation
■
Internal Connections (Top View)
1
2
9 10
Precautions
Be sure to refer to General Precautions on pages 5 to 7 for details on proper use.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. A117-E1-02
10
Similar pages