DR200G - DR210G GLASS PASSIVATED JUNCTION SILICON RECTIFIERS PRV : 50 - 1000 Volts Io : 2.0 Amperes D2 FEATURES : * * * * * * Glass passivated chip High current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.161 (4.10) 0.154 (3.90) 0.284 (7.20) 0.268 (6.84) MECHANICAL DATA : * Case : D2 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.465 gram 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL DR DR DR DR DR DR DR 200G 201G 202G 204G 206G 208G 210G 50 100 200 400 600 800 1000 UNIT Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V V Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 50 °C IF(AV) 2.0 A IFSM 50 A VF 1.0 V IR 5.0 μA IR(H) 50 μA CJ 75 pF °C/W Junction Temperature Range RθJA TJ 20 - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at I F = 2.0 Amps. Maximum DC Reverse Current Ta = 25 °C at rated DC Blocking Voltage Ta = 100 °C Typical Junction Capacitance (Note1) Typical Thermal Resistance (Note2) Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0V DC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 02 : March 31, 2005 RATING AND CHARACTERISTIC CURVES ( DR200G - DR210G ) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 8.3 ms SINGLE HALF SINE WAVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.0 1.6 1.2 0.8 0.4 40 30 Ta = 50 °C 20 10 RESISTIVE OR INDUCTIVE LOAD 0 0 25 50 75 100 125 150 0 175 1 AMBIENT TEMPERATURE, ( °C) FIG.3 - TYPICAL FORWARD CHARACTERISTICS 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 REVERSE CURRENT, MICROAMPERES 100 FORWARD CURRENT, AMPERES 2 NUMBER OF CYCLES AT 60Hz 10 1.0 Pulse Width = 300 μs 2% Duty Cycle 0.1 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 TJ = 25 °C PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 31, 2005