Release by PARA LIGHT DCC PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 http://www.para.com.tw E-mail: [email protected] DATA SHEET PART NO.: L-T690WDT-NWA REV: A / 2 CUSTOMER’S APPROVAL : _______________ DRAWING NO. : DS-31P-12-0002 DATE : 2012-5-8 PARA-FOR-065 DCC : ____________ PAGE 1 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l Features Û Û Û Û Û Û l Top view, Wide view angle, Netural White color PLCC6 package SMD LED . EIA STD package, packing in 12mm tape on 7" diameter reels (ANSI/EIA-481-B-2001). Compatible with automatic Pick & Place equipment. Compatible with IR Reflow soldering and TTW soldering. Pb free product and acceptable lead-free process! Meet RoHS Green Product. Application ＊General lighting ＊Decorative and Entertainment Lighting. ＊Indicators. l Package Outline Dimensions 3 6 2 1 5 4 C athode M ark 3 B 6 2 1 B 5 4 B Notes: 1. All dimensions are in millimeters. 2. Tolerance is ± 0.10mm (.004") unless otherwise noted. DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 2 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l Chip Materials Û Û Û Dice Material : InGaN Light Color : Netural White Lens Color : Light Yellow Diffused. l Absolute Maximum Ratings(Ta=25℃) Symbol Parameter Rating Unit PD Power Dissipation 270 mW IPF Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA IF Continuous Forward Current 90 mA VR Reverse Voltage 5 V 1000 V Note A ESD Electrostatic Discharge Threshold (HBM) Topr Operating Temperature Range -40 ~ + 85 ℃ Tstg Storage Temperature Range -40 ~ + 100 ℃ Note A : HBM : Human Body Model. Seller gives no other assurances regarding the ability of to withstand ESD. l Electro-Optical Characteristics (Ta=25℃) Symbol Min. Luminous Flux φv 18 Viewing Angle 2θ1/2 120 CIE Chromaticity x 0.3700 CIE Chromaticity y 0.3700 Color temperature CCT 4000 Forward Voltage VF 2.90 Color Rending Index CRI 70 Parameter Reverse Voltage Ir DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 Typ. 3.20 Max. Unit Test Condition 22 lm IF=60mA Deg Note 2 IF=60mA 4500 K 3.40 V IF = 60mA Ra IF=60mA uA Vf=5V 10 DATE : 2012-5-8 PAGE 3 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 Notes: 1. Luminous intensity is measured with a light sensor and filter combination that proximities the CIE eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. Caution in ESD : Static Electricity and surge damages the LED. It is recommended use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 4. Major standard testing equipment by “Instrument System” Model : CAS140B Compact Array Spectrometer and “KEITHLEY” Source Meter Model : 2400. l Typical Electro-Optical Characteristics Curves Fig.1 Relative Intensity vs. Wavelength DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 4 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) 60 40 20 3.0 3.2 3.4 3.6 Forward Voltage(v) 90 60 30 Ta=25℃ 2.0 1.5 1.0 0.5 20 40 60 80 100 20 40 60 80 100 Forward Current(mA) Ambient Temperature Ta(℃) Fig.3 Relative Luminous Intensity vs.Forward Current Fig.2 Forward Current Derating Curve 3.8 IFP=120mA 1 0.5 0.2 0.1 -40 -20 0 20 40 60 80 100 Ambient Temperature Ta(℃) Fig.4 Luminous Intensity vs.Ambient Temperature Allowable Forward Current IFP(mA) 2 Relative luminous intensity 120 0 2.8 Fig.1 Forward Current vs.Forward Voltage 200 0.35 0.33 -30℃ 0℃ 25 ℃ 85℃ 50℃ 0.32 30 20 0.31 0 1 5 10 20 50 100 0.30 0.29 Ambient Temperature Ta(℃) Fig.5 Forward Current Derating Curve 10° 0.30 0.31 0.32 x 0.33 0.34 Fig.6 Ambient Temperature vs.Chromaticity Coordinate ° 20° Y-Y 300mA 10° 20° X-X 30° 30° 240mA 0.33 0.32 Y 120mA 0.31 60mA 0.30 1.0 40° 0.9 50° 0.8 10mA 0.29 0.315 0.34 50 0° Ta=25℃ IFP=120mA Ta=25℃ 100 0.35 0.34 Relative Luminous lntensity Normalized of 120mA Forward Current IF(mA) Forward Current(mA) Ta=25℃ 80 0 2.5 150 100 0.7 0.320 0.325 0.330 0.335 x Fig.7 Forward Current vs.Chromaticity Coordinate DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 0.5 0.3 0.1 0.2 0.4 0.6 Fig 8 Spatial Distribution 60° 70° 80° 90° 1.0 40° 0.9 50° 0.8 60° 70° 80° 90° 0.7 0.5 0.3 0.1 0.2 0.4 0.6 Fig.9 Spatial Distribution DATE : 2012-5-8 PAGE 5 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l IV Bin Code List Luminous Flux（Lm） Bin Code Min Max Lh 18 20 Li 20 Tolerance of each bin are±10% 22 l VF Bin Code List Forward Voltage(VF),, Unit:V@60mA BINCODE MIN MAX V1 2.90 3.00 V2 3.00 3.10 V3 3.10 3.20 V4 3.20 3.30 V5 3.30 3.40 Tolerance of each bin are±0.1V. ●C.I.E Chromaticity Diagram DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 6 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 ●Bin Range of Chromaticity Coordinates @ 60mA 4000-4250-K1 4000-4250-K2 4000-4250-K3 4000-4250-K4 X Y X Y 0.3736 0.3879 0.3635 0.3808 0.3779 0.4079 0.3668 0.3997 0.3900 0.4157 0.3779 0.4079 0.3843 0.3943 0.3736 0.3879 0.3693 0.3691 0.3602 0.3621 0.3736 0.3879 0.3635 0.3808 0.3843 0.3943 0.3736 0.3879 0.3792 0.3752 0.3693 0.3691 0.3655 0.3519 0.3574 0.3463 0.3693 0.3691 0.3602 0.3621 0.3792 0.3752 0.3693 0.3691 0.3744 0.3579 0.3655 0.3519 0.3616 0.3343 0.3546 0.3305 0.3655 0.3519 0.3574 0.3463 0.3744 0.3579 0.3655 0.3519 0.3696 0.3392 0.3616 0.3343 4000-4250-H1 4000-4250-H2 4000-4250-H3 4000-4250-H4 ＊ easurement of Color coordinates : +/- 0.01 DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 7 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l Label Explanation l Reel Dimensions Notes: 1. Taping Quantity : 1000 pcs/reel MAX 2. The tolerances unless noted is±0.1mm, Angle±0.5°, Unit: mm. DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 8 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l Suggest Soldering Pad Dimensions Moisture Resistant Packaging Label H:\S M D\SM D\S M D° ü × ° \± ê ? ? .jpg H:\S MD\ SM D\S MD° ü × ° \± ê ? ? .jpg H:\S MD\ SM D\SM D° ü× ê ° \± ? ? .jpg l Reel Label Desiccant Aluminum moistue-proof bag 240 H:\S M D\S M D\S MD ° \± ê °ü × pg ? ? .j 145 210 5 25 Label Box 435 Carton Notes : One reel in a bag, one bag in a inner box, ten inner boxes in a carton. Unit : mm. DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 9of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l Package Dimensions Of Tape And Reel Notes: All dimensions are in millimeters. Plarity DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 10of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA ● Suggest Sn/Pb IR Reflow Soldering Profile Condition: ● Suggest Pb-Free IR Reflow Soldering Profile Condition: DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE REV: A / 2 11of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 l CAUTIONS 1. Static Electricity: * Static electricity or surge voltage damages the LEDs. It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. * All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. * When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. It is easy to find static-damaged LEDs by a light-on test or a VF test at a lower current (blew 1mA is recommended). * Damaged LEDs will show some unusual characteristics such as the leak current remarkably increases, the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria: (VF>2.0V,at IF=0.5m A ) 2. Storage : * Before opening the package : The LEDs should be kept at 30°C or less and 85%RH or less. When storing the LEDs, moisture proof packaging with absorbent material (silica gel) is recommended. * After opening the package : The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered within 168 hours (7 days) after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silica gel). It is also recommended to return the LEDs to the original moisture poof bag and to reseal the moisture proof bag again. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should e performed using the following conditions. Baking treatment: more than 24hours at 65±5℃. * Please avoid rapid transitions in ambient temperature in high humidity environments where condensation may occur. 3. Soldering: Do not apply any stress to the LED lens during soldering while the LED is at high temperature. Recommended soldering condition. * Reflow Soldering : Pre-heat 120~150°C, 120sec. MAX., Peak temperature : 240°C Max. Soldering time : 10 sec Max. * Soldering Iron : (Not recommended) Temperature350°C Max., Soldering time : 3 sec. Max.(one time only), power dissipation of iron : 20W Max. use SN60 solder of solder with silver content and don’t to touch LED lens when soldering. DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 12 of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 4. Lead-Free Soldering For Reflow Soldering : 1、Pre-Heat Temp: 150-180℃,120sec.Max. 2、Soldering Temp: Temperature Of Soldering Pot Over 240℃,40sec.Max. 3、Peak Temperature: 260℃，10sec. 4、Reflow Repetition: 2 Times Max. 5、Suggest Solder Paste Formula : 93.3 Sn/3.1 Ag/3.1 Bi/0.5 Cu For Soldering Iron (Not Recommended) : 1、Iron Tip Temp: 350℃ Max. 2、Soldering Iron: 30w Max. 3、Soldering Time: 3 Sec. Max. One Time. 5. Drive Method Circuit model A Circuit model B (A)Recommended circuit. (B)The difference of brightness between LED`s could be found due to the Vf-If characteristics of LED. 6. Reliability 1、Criteria For Judging The Damage Item Symbol Test Conditions Forward Voltage VF Reverse Current Luminous Intensity Criteria for Judgement MIN. Max. IF=60mA - U.S.L.*)×1.1 IR VR=5V - U.S.L.*)×2.0 IV IF=60mA L.S.L**)×0.7 - *) U.S.L.: Upper Standard Level **) L.S.L: Lower Standard Level DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 13of 14 Release by PARA LIGHT DCC SURFACE MOUNT DEVICE LED Part No. : L-T690WDT-NWA REV: A / 2 2、Test Items And Results Test Item Reference Standard Resistance to Soldering Heat JEITA (Reflow Soldering) ED-4701300 301 Solder ability (Reflow Soldering) Thermal Shock Temperature Cycle High Temperature Storage Temperature Humidity Storage Low Temperature Storage JEITA ED-4701300 303 JEITA ED-4701300 307 JEITA ED-4701100 105 JEITA ED-4701200201 JEITA ED-4701100 103 JEITA ED-4701200 202 Steady State Operating Life Condition Steady State Operating Life of High Humidity Heat Test Condition Note Tsld=260℃,10sec. (Pre treatment 2times 30℃,70%,168hrs) Tsld=215℃,3sec. 1time (Lead Solder) over 95% -40℃ ~ 100℃ 100cycles 30min. 30min. -40℃ ~ 25℃~100℃~25℃ 100cycles 30min. 5min. 30min. 5min Number of Damaged 0/50 0/50 0/50 0/50 Ta=100℃ 1000hrs. 0/50 Ta=60℃,RH=90% 1000hrs. 0/50 Ta=-40℃ 1000hrs. 0/50 Ta=25℃,IF=60mA 1000hrs. 0/50 Ta=60℃,RH=90%,IF=60mA 500hrs. 0/50 7. Cleaning Û If cleaning is required , use the following solutions for less than 1 minute and less than 40℃. Û Appropriate chemicals: isopropyl alcohol. (When using other solvents, it should be confirmed beforehand whether the solvents will dissolve the package and the resin or not.) Û Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as ultrasonic power and the assembled condition. Before cleaning, a pre-test should be confirm whether any damage to the LEDS will occur. 8.Others: The appearance and specifications of the product may be modified for improvement without notice. DRAWING NO. : DS-31P-12-0002 PARA-FOR-068 DATE : 2012-5-8 PAGE 14 of 14