IRF OM7622NM Surface mount low dropout positive adjustable regulator Datasheet

OM7621NM
OM7622NM
OM7623NM
OM7624NM
SURFACE MOUNT LOW DROPOUT POSITIVE
ADJUSTABLE REGULATORS
Three Terminal Adjustable Low Dropout
7.5A, 5A, 3A, 1.5A Positive Voltage Regulators
FEATURES
•
•
•
•
•
•
•
Surface Mount Hermetic Package
Operates Down to 1V Dropout, 1.5V @ Max. Current
.015% Typical Line Regulation
.01% Typical Load Regulation
1% Reference Voltage
Electrically Equivalent to LT1083, 84, 85 and 86
Available Hi-Rel Screened
DESCRIPTION
These three terminal positive adjustable voltage regulators in surface mount package
are designed to provide 7.5A, 5A, 3A, and 1.5A with higher efficiency than
conventional voltage regulators. The devices are designed to operate to 1 Volt input
to output differential and the dropout voltage is specified as a function of load current.
These devices are ideally suited for Military applications where surface mount, small
size, hermeticity and high reliability are required.
ABSOLUTE MAXIMUM RATINGS
Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Output Current - OM7621NM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 A
OM7622NM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 A
OM7623NM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 A
OM7624NM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 A
a
PIN CONNECTION
MECHANICAL OUTLINE
.140
.140
.015
.500
1
2
.075
.157
.030
MIN.
Pin 1: VIN
Pin 2: Adjust
.625
.415
3
Pin 3: VOUT
.062
TOP VIEW
4 11 R1
Supersedes 1 05 R0
3.5 - 109
SIDE VIEW
3.5
.140
.075
.375
BOTTOM VIEW
OM7621NM - OM7624NM
ELECTRICAL CHARACTERISTICS TJ = -55°C to + 125°C
Parameter
Conditions
Reference Voltage
IOUT = 10 mA, Tj = 25°C
Min.
(VIN - VOUT) = 3 V
Typ.
Max.
Units
1.238
1.262
V
1.220
1.270
V
0.25
%
10mA ≤ IOUT ≤ IFULL LOAD
1.5 V ≤ (VIN - VOUT) ≤ 25 V (Note 3)
Line Regulation
•
ILOAD = 10 mA, 1.5 V ≤ (VIN - VOUT) ≤ 15 V, Tj = 25°C
%
15 V ≤ (VIN - VOUT ) ≤ 35 V (Notes 1 & 2)
Load Regulation
•
0.55
0.9
%
•
•
1.1
%
1.5
V
%
(VIN - VOUT) = 3 V
10 mA ≤ IOUT ≤ IFULL LOAD
Tj = 25°C (Notes 1, 2, & 3)
Dropout Voltage
∆VREF = 1%, IOUT = IFULL LOAD
Current Limit
OM7621NM
•
•
•
•
•
•
•
•
•
(VIN - VOUT) = 5 V
(VIN - VOUT) = 25 V
OM7622NM
(VIN - VOUT) = 5 V
(VIN - VOUT) = 25 V
OM7623NM
(VIN - VOUT) = 5 V
(VIN - VOUT) = 25 V
OM7624NM
(VIN - VOUT) = 5 V
(VIN - VOUT ) = 25 V
Minimum Load Current
(VIN - VOUT) = 25 V
Thermal Regulation
TA = 25°C, 30 ms pulse
8.0
A
0.4
A
5.5
A
0.3
A
3.2
A
0.2
A
1.5
A
0.08
A
20
mA
OM7621NM
0.01
%/W
OM7622NM
.015
%/W
OM7623NM
0.02
%/W
OM7624NM
0.05
%/W
Ripple Rejection
f = 120 Hz
CADJ = 25 µF Tantalum
IOUT - IFULL LOAD (VIN - VOUT) = 3 V
Adjust Pin Current
TJ = 25°C
Adjust Pin Current Change
10mA ≤ IOUT ≤ IFULL LOAD
Temperature Stability
-55°C ≤ TJ ≤ +150°C
Long Term Stability
TA = 125°C, 1000 Hrs.
Thermal Resistance
Junction-to-Case
1.5 V ≤ (VIN - VOUT) ≤ 25 V
3.5
Lead Temperature
5 Seconds at Case
60
dB
•
80
µA
5
µA
1.5
%
1
%
OM7621NM
2.1
°C/W
OM7622NM
3.1
°C/W
OM7623NM
4.1
°C/W
OM7624NM
5.3
°C/W
225
Note 1: Load and line regulation are measured at a constant junction temperature by low duty cycle pulse testing.
Note 2: Line and load regulation are guaranteed up to the maximum power dissipation (OM7621/60W, OM7622/45W,
OM7623/30W, OM7624/15W). Power dissipation is determined by the input/output differential and the output
current. Guaranteed maximum power dissipation will not be available over the full input/output voltage range.
Note 3: IFULL LOAD curve is defined as the minimum value of current limit as a function of input to output voltage.
Note that power dissipation is only achievable over a limited range of input to output voltage.
Note 4: Dropout voltage is specified over the full output current range of the device.
The • denotes the specifications which apply over the full operating temperature range.
°C
Similar pages