Embedded Power for Business-Critical Continuity Rev. 05.22.07 AIF-PFC Series 1 of 2 AIF - PFC Series 1600 Watts Total Power: Input Voltage: # of Outputs: 1600 Watts /120 - 370VDC (Configurable) 85 - 264VAC Single Electrical Specifications Special Features • Unity power factor • High efficiency - up to 95% • Universal input voltage and frequency range • Up to 1600W output power • Positive and Negative enable function • Parallelable with accurate current sharing • <10% harmonic distortion conforming to IEC1000-3-2 Compliance • 100°C baseplate operating temperature • DC Input option • Power fail warning signal • Enable output to control DC-DC Converter • EEPROM data storage via I2C Interface • External inrush current limited protection • Power Density up to 290W/in3 Input range Input surge Input Frequency Efficiency Total Harmonic Distortion Power Factor 85 - 264 Vac / 120 - 370 Vdc (configurable) 290 Vac / 1s 50/60 Hz 95% @ 230Vac, 1600 W (typical) Less than 10% 0.99 typical (Po ± 500 W); 0.97 typical (Po ± 1000 W) Output Output Voltage Current Share Accuracy Overvoltage Protection Power Limit for AC input for DC input 380V typical(Io =4.2A / Vi > 180 Vac); 393V typical (Io = 0A) Note: Vin rms must always be lower than Vout 10% max 430 max Vin = 85Vac, Pmax = 1000W; Vin = 230Vac, Pmax = 1600W Vin = 370Vdc, Pmax =1600W Control Power Fail Warning Power Fail Warning Adjust LD Enable PFC Enable Voltage Adjust Direct drive output to opto-isolator 195 to 355Vdc adjustable Direct drive output to opto-isolator TTL compatiable 76% to 100% Vo DC Input Enable Clock Input (external sync) Clock Output (int. clock) Temperature Monitor Output Current Monitor Output I2C Interface 6Vp-p typical @ 1MHz ± 5% 6Vp-p typical @ 1MHz ± 5% 10mV/°C 0 to 1mA (1mA = 4.2A output) Notes Safety UL cUL TUV Input 60950 Recognized 60950 Recognized EN60950 Licensed Nominal values apply with sense pins disconnected and other control pin unconnected. Embedded Power for Business-Critical Continuity Rev. 05.22.07 AIF-PFC Series 2 of 2 Americas Environmental Specifications Operating temperature Startup temperature 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 -20°C to +100°C (baseplate temperature) -40°C to +100°C (baseplate temperature) Storage temperature -40°C to +120°C Overtemperature protection 120°C max MTBF 1million hours Europe (UK) Ordering Information Model Number Description Notes For parallel operation the total input current must be <16Arms. Designed for parallel operation where the total input AIF04ZPFC-02L 1600W Low Profile PC Module current >16Arms, requires external rail rectifiers. AIF04ZPFC-01NL Negative Enable AIF04ZPFC-01NL Negative Enable 1. Fon Non-thread hole, add suffix “-NT”. AIF04ZPFC-01L Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 1600W Low Profile PC Module Mechanical Drawing Pin Assignments Input (AC) Output (DC) Control Pins 31. L1 32. L1 21. Positive 22. Positive 1. PV Aux 2. Temp Mon 33. L2 34. L2 23. Negative 24. Negative 3. C Mon 4. C Share 5. Clk Out 6. Clk In 7. PV Aux + 8. SDA 9. SCL 10. DC Enable 11. V Adj 12. PFW Adj 13. S Gnd 14. PFW 15. LD Enable 16. PF Enable Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.astecpower.com www.artesyn.com [email protected] [email protected] While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Specifications subject to change without notice. Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.