POWER RELAY 1 POLE— 1, 3, 5, 10 A (MEDIUM LOAD CONTROL) LZ SERIES RoHS compliant n FEATURES l l l l l l l l UL, CSA, SEV recognized 4 kinds of contact ratings —Low level to 10 amps switching Standard and high sensitivity types available High surge strength version available UL class B (130°C) insulation type available (only plastic sealed type) Printed circuit terminals—fits grid with 0.1 inch Plastic sealed type available Lead Free since date code: 0437L2 Please see page 9 for more information n ORDERING INFORMATION [Example] LZ – B (a) (b) 12 (c) H (d) M (e) S (f ) E – K HV – UC (g) (h) ( i ) (j) (a) Series Name LZ : LZ Series (b) Coil Heat Proof Class Nil : Standard type B : UL class B insulation type (130°C) (c) Nominal Voltage Refer to the COIL DATA CHART (d) Contact Rating Nil : 3 A H :5A V : 10 A (standard coil power only) W : 1 A (bifurcated) (e) Contact Arrangement Nil : 1 form C (SPDT) M : 1 form A (SPST-NO) ( f) Coil Power Nil : Standard type (450 to 600 mW) S : High sensitive type (330 mW) (g) Contact Material (Rating) Nil : Gold overlay silver-palladium (1A) (only LZ-W) Nil : Gold overlay silver-nickel (3 A, 5 A) Nil : Silver alloy (10 A) (only LZ-V) (contains cadmium) E : Silver-nickel (3 A, 5 A) (h) Enclosure Nil : Flux free type K : Plastic sealed type (recommended for new designs) C : Plastic sealed type (with tape) (i) Surge Strength Nil : Standard type (4,000 V) HV : High surge strength type (6,000 V) ( j) Standard UC : UL, CSA approved type 1 LZ SERIES n COIL DATA CHART LZ Standard MODEL Single Bifurcated Nominal Voltage 1 A Type Coil Resistance (±10%) Must Operate Voltage* Must Release Voltage* Nominal Power 10 A Type 5 A Type 3 A Type LZ-(B) 1.5VM LZ-(B)1.5H(M)(E) LZ-(B) 1.5(M)(E) LZ-(B)1.5W(M) 1.5 VDC 5 0.97 VDC 0.08 VDC 450 mW LZ-(B) 3VM LZ-(B) 3H(M)(E) LZ-(B) 3 (M)(E) LZ-(B) 3 W(M) 3 VDC 20 1.95 VDC 0.15 VDC 450 mW LZ-(B) 5VM LZ-(B) 5H(M)(E) LZ-(B) 5 (M)(E) LZ-(B) 5 W(M) 5 VDC 56 3.25 VDC 0.25 VDC 450 mW LZ-(B) 6VM LZ-(B) 6H(M)(E) LZ-(B) 6 (M)(E) LZ-(B) 6 W(M) 6 VDC 80 3.9 VDC 0.3 VDC 450 mW LZ-(B) 9VM LZ-(B) 9H(M)(E) LZ-(B) 9 (M)(E) LZ-(B) 9 W(M) 9 VDC 180 5.85 VDC 0.45 VDC 450 mW LZ-(B) 12VM LZ-(B) 12H(M)(E) LZ-(B 12 (M)(E) LZ-(B) 12 W(M) 1 2 VD C 320 7.8 VDC 0 . 6 V DC 450 mW LZ-(B) 18VM LZ-(B) 18H(M)(E) LZ-(B) 18 (M)(E) LZ-(B) 18 W(M) 1 8 VD C 720 11.7 VDC 0 . 9 V DC 450 mW LZ-(B) 24VM LZ-(B) 24H(M)(E) LZ-(B) 24 (M)(E) LZ-(B) 24 W(M) 2 4 VD C 1,280 15.6 VDC 1.2 VDC 450 mW LZ-(B) 48VM LZ-(B) 48H(M)(E) LZ-(B) 48 (M)(E) LZ-(B) 48W(M) 4 8 VD C 3,800 28.8 VDC 2.4 VDC 600 mW LZ-(B)100VM LZ-(B)100H(M)(E) LZ-(B)100(M)(E) LZ-(B)100W(M) 100VDC 22,200 65.0 VDC 5 . 0 V DC 450 mW 1.5 VDC 5 1.2 VDC 0.08 VDC 450 mW LZ-(B) 3V 3 VDC 20 2.4 VDC 0.15 VDC 450 mW LZ-(B) 5V 5 VDC 56 4.0 VDC 0.25 VDC 450 mW LZ-(B) 6V 6 VDC 80 4.8 VDC 0.3 VDC 450 mW LZ-(B) 1.5 V LZ-(B) 9V 9 VDC 180 7.2 VDC 0.45 VDC 450 mW LZ-(B) 12V 1 2 V DC 320 9.6 VDC 0.6 VDC 450 mW LZ-(B) 18V 1 8 V DC 720 14.4 VDC 0.9 VDC 450 mW LZ-(B) 24V 2 4 V DC 1,280 19.2 VDC 1.2 VDC 450 mW LZ-(B) 48V 4 8 V DC 3,800 38.4 VDC 2.4 VDC 600 mW LZ-(B) 100V 100VDC 22,200 80.0 VDC 5.0 VDC 450 mW Must Operate Voltage* Must Release Voltage* Nominal Power LZ-( )S High Sensitive MODEL Single 10 A Type Bifurcated Nominal Voltage 1 A Type Coil Resistance (±10%) 5 A Type 3 A Type LZ-(B)1.5H(M)S, (E) LZ-(B)1.5(M)S, (E) LZ-(B)1.5W(M)S 1.5 VDC 6.8 0.97 VDC 0.08 VDC 330 mW LZ-(B) 3H(M)S, (E) LZ-(B) 3 (M)S, (E) LZ-(B) 3 W(M)S 3 VDC 27 1.95 VDC 0.15 VDC 330 mW LZ-(B) 5H(M)S, (E) LZ-(B) 5 (M)S, (E) LZ-(B) 5 W(M)S 5 VDC 80 3.25 VDC 0.25 VDC 330 mW LZ-(B) 6H(M)S, (E) LZ-(B) 6(M)S, (E) LZ-(B) 6 W(M)S 6 VDC 110 3.9 VDC 0 . 3 VD C 330 mW LZ-(B) \9H(M)S, (E) LZ-(B) 9(M)S, (E) LZ-(B) 9 W(M)S 9 VDC 250 5.85 VDC 0.45 VDC 330 mW LZ-(B) 12H(M)S, (E) LZ-(B 12(M)S, (E) LZ-(B)12 W(M)S 12 VDC 440 7.8 VDC 0 . 6 V DC 330 mW LZ-(B) 18H(M)S, (E) LZ-(B)18 (M)S, (E) LZ-(B)18 W(M)S 18 VDC 990 11.7 VDC 0 . 9 V DC 330 mW LZ-(B) 24H(M)S, (E) LZ-(B) 24(M)S, (E) LZ-(B)24 W(M)S 24 VDC 1,780 15.6 VDC 1.2 VDC 330 mW Note : All values in the table are measured at 20°C. *: Specified values are subject to pulse wave voltage. LZ SERIES n SPECIFICATIONS LZ-( )Type (Standard Type) Item Contact 10 A Type 5 A Type 3 A Type 1 A Type LZ-()V LZ-( )VM LZ-( )H, LZ-( )HE LZ( ), LZ-( )E LZ-( )W Arrangement 1 form A (SPST-NO) or 1 form C (SPDT) Gold overlay alloy Material Silver alloy Gold overlay silver Silver alloy (LZ-HE, E) silver-palladium (contains cadmium) Configuration Single Single (crossbar) Resistance (initial) (at 1 A 6 VDC) Maximum 100 mΩ Maximum 70 mΩ (LZ-H,LZ) Maximum 100 mΩ (LZ-HE, E) Bifurcated (crossbar) Max. 50 mΩ Rating (resistive) 10 A 120 VAC/24 VDC 5 A 120 VAC/24 VDC 3 A 120 VAC/30 VDC 1 A 120 VAC/30 VDC 1/4 HP 120 VAC 1/8 HP 120 VAC 1/10 HP 120 VAC Maximum Carrying Current Maximum Switching Power Coil 10 A 5 A 1,680 VA, 240 W 960 VA, 120 W Life Other 600 VA, 90 W 190 VA, 30 W Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 10 A 5 A Minimum Switching Load*1 100 mA 5 VDC 10 mA 5 VDC (LZ-H) 10 mA 5 VDC (LZ-) 100 mA 5 VDC (LZ-HE) 100mA 5VDC (LZ-E) Nominal Power (at 20°C) 450 to 600 mW Operate Power (at 20°C) 290 to 390mW Time Value 1 A 3 A 1 A 0.1 mA 100 mVDC 170 to 220 mW Operating Temperature –30°C to +70°C (no frost) (refer to the CHARATERISTIC DATA) Operate (at nominal voltage) Maximum 7 ms Release (at nominal voltage) Maximum 4 ms Mechanical 2 x 10 7 operations minimum Electrical 1 x 10 5 operations minimum (contact rating) Vibration Misoperation Resistance Endurance 10 to 55 Hz (double amplitude of 3.3 mm) Shock Misoperation Resistance Endurance 100 m/s 2 (11 ±1 ms) 1,000 m/s 2 (6 ±1 ms) Weight Approximately 7.7g 10 to 55 Hz (double amplitude of 3.3 mm) *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. LZ SERIES n SPECIFICATIONS LZ-( ) S Type (High Sensitive Type) Item Contact Time Value Insulation Other 1 A Type LZ-( )HS, LZ( )HSE LZ-( )S, LZ-( )SE LZ-( )WS 1 form A (SPST-NO) or 1 form C (SPDT) Material Gold overlay silver nickel Silver nickel (LZ-HSE, SE) Gold overlay silver-palladium Configuration Single (crossbar) Bifurcated (crossbar) Maximum 70 mΩ (LZ-HS, S) Maximum 100 mΩ (LZ-HSE, SE) Maximum 50 mΩ Rating Resistive 5 A 120 VAC/24 VDC 1 A 120 VAC/30 VDC Motor Load 1/8 HP 120 VAC 1/10 HP 120 VAC Maximum Carrying Current 5A 1 A Maximum Switching Power 960 VA, 120 W 600 VA, 90 W 190 VA, 30 W Maximum Switching Voltage 250 VAC, 150 VDC Maximum Switching Current 5 A 3 A 1 A Minimum Switching Load*1 10 mA 5 VDC (LZ-HS, S) 100 mA 5 VDC (LZ-HSE, SE) Nominal Power (at 20°C) 330 mW Operate Power (at 20°C) 140 mW Operating Temperature –30°C to +80°C (no frost) (refer to the CHARACTERISTIC DATA) Operate (at nominal voltage) Maximum 7 ms Release (at nominal voltage) Maximum 4 ms Resistance Minimum 250 MΩ Dielectric between open contacts Strength between coil and contacts 750 VAC 1 minute Surge Strength Life 3 A Type Arrangement Resistance (initial) (at 1 A 6 VDC) Coil 5 A Type 3 A 120 VAC/30 VDC 2,000 VAC 1 minute Standard type : 4,000 V (at 1.2 × 50 µs) High surge strength type: 6,000 V (at 1.2× 50 µs) Mechanical 2 × 10 7 operations minimum Electrical 1× 10 5 operations minimum (rated load) Vibration Misoperation 0.1 mA 100 mVDC 10 to 55 Hz (double amplitude of 3.3 mm) Resistance Endurance 10 to 55 Hz (double amplitude of 3.3 mm) Shock Misoperation 100 m/s 2 (11 ±1 ms) Resistance Endurance 1,000 m/s 2 ( 6 ±1 ms) Weight Approximately 7.7 g *1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. LZ SERIES n INSULATION LZ: Standard type Item 10A 5A Resistance (500VDC) Min. 250 MΩ Dielectric strength open contacts 750 VAC 1min. coil and contacts 2,000 VAC 1 min. Surge voltage 3A 1A Standard: 4,000V, High Surge: 6,000V 1.2 x 50µs standard wave LZ-( )S: High sensitive type Item 10A Resistance (500VDC) Min. 250 MΩ Dielectric strength open contacts 750 VAC 1min. coil and contacts 2,000 VAC 1 min. Surge voltage 5A 3A Standard: 4,000V, High Surge: 6,000V 1.2 x 50µs standard wave n SAFETY STANDARD AND FILE NUMBERS Type Compliance Contact rating UL UL 508 E 56149, E 45026 CSA C22.2 No. 14 LR 35579 Flammability: UL 94-V0 (plastics) [LZ-( )W, LZ-( )WS] 0.8A, 240VDC (resistive) 1A, 120VAC / 30VDC (resistive) [LZ-( ), LZ-( )S] 2.5A, 240 VDC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( ), LZ-( )S] 2.5A, 240 VAC (resistive) 3A, 120 VAC / 30VDC (resistive) 1/10 HP, 120VAC/2400VAC Pilot duty: D150 [LZ-( )V] 7A, 240 VDC (resistive) 10A, 120 VAC / 30VDC (resistive) 1/4 HP, 120VAC/2400VAC Also complies with SEV LZ SERIES n CHARACTERISTIC DATA LZ SERIES n REFERENCE DATA LZ SERIES n DIMENSIONS l Dimensions LZ-M type l Schematics (BOTTOM VIEW) l PC board mounting hole layout (BOTTOM VIEW) LZ-M-K, LZ-M-C type (Plastic sealed type) LZ type LZ-K, LZ-C type (Plastic sealed type) Unit: mm LZ SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. LZ SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. November 30, 2007 10