MIL-DTL-38999 Connectors Glenair ASAP Fiber Optic Cable Sets Inside-the-Box Receptacle/Pigtail Assembly with FiberCon® Backshell D38999 Series III to ST, FC, SC, LC & SMA PRODUCT FEATURES Jam-Nut and Wall Mount D38999 Series III Style Fiber Optic Receptacle Connectors in Aluminum, Composite or Stainless Steel ST, FC, SC, LC and SMA to D38999 Series III Configurations Grommet Sealing and Micro-Alignment Backshells in Aluminum, Composite and Stainless Steel Singlemode and Multimode Fiber Media Military Standard Dust Caps MIL-PRF-29504 Approved Termini Multichannel Capability: From 2 to 37 Channels Custom Lengths Available Because Sometimes Strain-Relief and Exact Fiber Alignment are a Requirement—Even Inside the Box Termini Retraction and Its Effect On Micro-Bending FiberCon Backshell Cavity Radius Should Not Exceed The Fiber Minimum Bend Radius Retraction During Mating The Glenair FiberCon® Backshell Assembly Glenair can supply receptacle/pigtail assemblies with a FiberCon® Backshell that protects fiber terminations and insures exact alignment of the fiber optic termini. The grommeted backshell design prevents micro-bending of the fibers while providing optimum strain relief to the overall cable. The unique design is available only from Glenair and is available as a component part of this ASAP cable assembly. The turnkey assembly includes fiber optic wiring, Glenair Backshell, MIL-DTL-38999 Style Connector, MIL-PRF-29504 Termini, Mil-Spec Dust-Caps and customer specified marking and labeling. © 2006 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-42 www.glenair.com MIL-DTL-38999 Connectors Glenair ASAP Fiber Optic Cable Sets Inside-the-Box Receptacle/Pigtail Assembly with FiberCon® Backshell D38999 Series III to ST, FC, SC, LC & SMA A B CONNECTOR CONNECTOR L LENGTH Reference Part Number Development: FO1004 P - 08 - 1 W 02 62 48 L Protective Covers Basic part Number Terminus Type L = Less Covers Omit for with Covers P = Pin Terminus S = Socket Terminus Length in Inches 6 Inch Minimum A Connector Type Fiber Size 06 = D38999/26 Style Plug 08 = D38999/24 Style Jam-Nut Receptacle H7 = D38999/20 Style Wall Mount Receptacle (Std.) S7 = D38999/20 Style Wall Mount Receptacle (Slotted) T7 = D38999/20 Style Wall Mount Receptacle (Tapped) 09 = 9.3/125 Singlemode 50 = 50/125 Multimode 62 = 62.5/125 Multimode 10 = 100/140 Multimode 20 = 200/230 Multimode Number of Fibers* 02 = 2 Fibers (Shell Size 11) 04 = 4 Fibers (Shell Size 13) 05 = 5 Fibers (Shell Size 15) 08 = 8 Fibers (Shell Size 17) 11 = 11 Fibers (Shell Size 19) 16 = 16 Fibers (Shell Size 21) 21 = 21 Fibers ( Shell Size 23) 29 = 29 Fibers (Shell Size 25) 37 = 37 Fiber (Shell Size 25) B Connector Type 0 = ST M83522 Style 1 = ST Connector 2 = FC Connector 3 = SC Connector 4 = SC Duplex 5 = SMA Connector (906 Type) 6 = SMA Connector (905 Type) 7 = LC Connector 8 = LC Duplex 9 = Customer Specified Connector/Backshell Class F = Aluminum, Electroless Nickel Plating J = Composite, Olive Drab Cadmium Plating K = Stainless Steel, Passivated M = Composite, Electroless Nickel Plating W = Aluminum, Olive Drab Cadmium Plating Please Reference Special Marking, Labels Or Other Identification Specifications on Your Purchase Order. Unless Indicated, “B” Connector Identification Will Follow “A” Connector Pin Designations. *See Page B-10 for Insert Arrangements Part Numbering is for Reference Purposes Only. A Unique Glenair Part Number Will Be Assigned to Your Cable Order. © 2006 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-43 www.glenair.com