Aluminum Electrolytic Capacitors/ FP Surface Mount Type Series: FP Type: V FP High temperature Lead-Free reflow (suffix:A✽) ■ Features ● ● ● ● ● Low ESR (30 % to 50 % less than FK series) Endurance: 2000 h at 105 °C Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 1800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Please see the attached standard products list 6.3 10 16 25 35 50 2 2 2 2 2 2 (Impedance ratio at 120 Hz) 3 3 3 3 3 3 4 4 4 3 3 3 W.V. (V) Z(–25 °C)/Z(+20 °C) Z(–40°C)/Z(+20 °C) Z(–55°C)/Z(+20 °C) Endurance After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the limits specified below. Post-test requirement at +20 °C ±30 % of initial measured value Capacitance change tan d < 200 % of initial specified value DC leakege current < initial specified value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Cap (μF) to to 470 1800 10 k 0.95 0.95 100 k to 1.00 1.00 ■ Dimensions in mm(not to scale) Negative polarity marking (–) Capacitance (μF) K '1 Mark for Lead-Free Products Black Dot (Square) Lot number E V H 25 V 35 V 50 V D L A, B H (I) K W Pressure Relief (010 and larger) Size code Rated voltage Mark Rated Voltage Mark j 6.3 V A 10 V C 16 V + L Series identification A±0.2 – H 0D±0.5 0.3 max. (P) Example:6.3 V 22 μF Marking color: BLACK (Unit : mm) (I) ■ Marking 1k 0.85 0.90 B±0.2 10 560 120 0.65 0.75 ( ) Reference size I W P K + 0.15 - 0.20 B 4.0 5.8±0.30 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 C 5.0 5.8±0.30 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.15 0.35 +- 0.20 D 6.3 5.8±0.30 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.15 0.35 +- 0.20 D8 6.3 7.7±0.30 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.15 0.35 +- 0.20 8.3 E 8.0 6.2±0.30 9.5 max. 3.4 0.65±0.1 2.2 0.15 0.35 +- 0.20 F 8.0 10.2±0.30 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20 G 10.0 10.2±0.30 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-47 – Aluminum Electrolytic Capacitors/ FP ■ Standard Products Endurance : 105 °C 2000 h Case size W.V. (V) Cap. (±20 %) (μF) 22 47 100 6.3 220 330 470 1000 1500 1800 22 33 150 10 220 330 470 680 1000 1200 10 22 47 68 16 100 150 220 330 470 680 820 10 22 33 47 68 25 100 150 220 330 470 560 Dia. Length (mm) 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 6.3 6.3 8 8 8 8 10 10 4 4 5 5 6.3 6.3 6.3 6.3 6.3 6.3 8 8 8 10 10 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 10 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification ✽Size Code B (B) C (C) D D D8 E F F G (G) B (B) C D D8 E F F F G (G) B (B) C (C) D D D D8 D8 D8 E F F G (G) B C (C) D D D D8 E F F F G (G) E.S.R. tan d Ripple Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 160 0.85 0.26 EEEFP0J220AR 160 0.85 0.26 EEEFPJ470UAR 240 0.36 0.26 EEEFP0J470AR 240 0.36 0.26 EEEFPJ101UAR 300 0.26 0.26 EEEFP0J101AP 300 0.26 0.26 EEEFP0J221AP 600 0.16 0.26 EEEFPJ331XAP 500 0.18 0.26 EEEFP0J331AP 850 0.08 0.26 EEEFP0J471AP 850 0.08 0.26 EEEFP0J102AP 1190 0.06 0.26 EEEFP0J152AP 850 0.08 0.26 EEEFPJ182UAP 160 0.85 0.19 EEEFP1A220AR 160 0.85 0.19 EEEFPA330UAR 240 0.36 0.19 EEEFP1A330AR 300 0.26 0.19 EEEFP1A151AP 600 0.16 0.19 EEEFPA221XAP 500 0.18 0.19 EEEFP1A221AP 850 0.08 0.19 EEEFP1A331AP 850 0.08 0.19 EEEFP1A471AP 850 0.08 0.19 EEEFP1A681AP 1190 0.06 0.19 EEEFP1A102AP 850 0.08 0.19 EEEFPA122UAP 160 0.85 0.16 EEEFP1C100AR 160 0.85 0.16 EEEFPC220UAR 240 0.36 0.16 EEEFP1C220AR 240 0.36 0.16 EEEFPC470UAR 300 0.26 0.16 EEEFP1C470AP 300 0.26 0.16 EEEFP1C680AP 300 0.26 0.16 EEEFP1C101AP 600 0.16 0.16 EEEFPC101XAP 600 0.16 0.16 EEEFPC151XAP 600 0.16 0.16 EEEFPC221XAP 500 0.18 0.16 EEEFP1C221AP 850 0.08 0.16 EEEFP1C331AP 850 0.08 0.16 EEEFP1C471AP 1190 0.06 0.16 EEEFP1C681AP 850 0.08 0.16 EEEFPC821UAP 160 0.85 0.14 EEEFP1E100AR 240 0.36 0.14 EEEFP1E220AR 240 0.36 0.14 EEEFPE330UAR 300 0.26 0.14 EEEFP1E330AP 300 0.26 0.14 EEEFP1E470AP 300 0.26 0.14 EEEFP1E680AP 600 0.16 0.14 EEEFPE101XAP 500 0.18 0.14 EEEFP1E101AP 850 0.08 0.14 EEEFP1E151AP 850 0.08 0.14 EEEFP1E221AP 850 0.08 0.14 EEEFP1E331AP 1190 0.06 0.14 EEEFP1E471AP 850 0.08 0.14 EEEFPE561UAP Reflow (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) Taping (pcs) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 900 1000 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 900 900 1000 500 500 500 500 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 ✽ Size code( ):Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J→J, 1A→A, 1C→C, 1E→E, 1V→V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-48 – Aluminum Electrolytic Capacitors/ FP ■ Standard Products Endurance : 105 °C 2000 h Case size W.V. (V) 35 50 Cap. (±20 %) (μF) 10 22 33 47 68 100 150 220 330 390 100 220 Dia. Length (mm) 4 5 6.3 6.3 6.3 6.3 8 8 8 10 10 8 10 (mm) 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification ✽Size Code (B) C D D D8 D8 F F F G (G) F G Ripple E.S.R. tan d Part No. Current (RoHS:compliant) (100 kHz) (100 kHz) (120 Hz) (+105 °C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 160 0.85 0.12 EEEFPV100UAR 240 0.36 0.12 EEEFP1V220AR 300 0.26 0.12 EEEFP1V330AP 300 0.26 0.12 EEEFP1V470AP 600 0.16 0.12 EEEFPV680XAP 600 0.16 0.12 EEEFPV101XAP 850 0.08 0.12 EEEFP1V101AP 850 0.08 0.12 EEEFP1V151AP 850 0.08 0.12 EEEFP1V221AP 1190 0.06 0.12 EEEFP1V331AP 850 0.08 0.12 EEEFPV391UAP 670 0.18 0.10 EEEFP1H101AP 900 0.12 0.10 EEEFP1H221AP Reflow (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (6) (6) Taping (pcs) 2000 1000 1000 1000 900 900 500 500 500 500 500 500 500 ✽ Size code( ):Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J→J, 1A→A, 1C→C, 1E→E, 1V→V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-49 –