PRODUCT DATASHEET Cute series last update 23/5/2017 DETAILS Product Number C10755_CUTE-3-M Family Cute Type Lens array Color clear Diameter 35 mm Height 15 mm Style round Optic Material PMMA Holder Material Fastening glue, pin Status production ready ROHS Comliant Yes Date Updated 23/05/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XM-L 25 deg Medium 90 % 3.510 - XP-E 22 deg Medium 92 % 4.710 - XP-G 23 deg Medium 92 % 4.040 - XM-L HVW sim: 33 Medium 84 % - - XT-E HVW sim: 30 Medium 83 % - - XT-E 23 deg Medium 85 % 3.900 - XP-G2 22 deg Medium 88 % 4.400 - XM-L2 26 deg Medium 89 % 3.500 - XP-G3 sim: 31 Medium sim: 91 % sim: 2.400 - C3535 (Intematix) 27 deg Medium 80 % - - H35C1 (LEMWA33) 25 deg Medium 86 % 3.700 - LUXEON Rebel 23 deg Medium 88 % 4.290 - LUXEON Rebel ES 24 deg Medium 88 % - - LUXEON A 24 deg Medium 88 % - - NCSxx19A 25 deg Medium 89 % - - NVSxx19A 24 deg Medium 89 % - - Oslon SSL 80 23 deg Medium 89 % 4.070 - Oslon SSL 150 31 deg Medium - 1.600 - Oslon Square EC 28 deg Medium - 2.210 - Z5 22 deg Medium - - - Z5M1/Z5M2 24 deg Medium 87 % 4.000 - June 13th 2017 5:21 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of C10755_CUTE-3-M-(XPG2) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D 4 4 28 3x1 20d eg Bottom view deg 4. 4 15 3 3 5 120 17 3x Part no.s; Spot: C10754_Cute-3-SS C11333_Cute-3-SS, pin head length =1.5mm Medium: C10755_Cute-3-M C11334_Cute-3-M, pin head length =1.5mm Wide: C10756_Cute-3-W Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 1.5 3 or 1.5 2 Material: PMMA This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Wide lens Side view 2.35 2 Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE Cute-3 series SIZE 1 PART NUMBER A4 SCALE D 3 1:1 WEIGHT 8 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.