Keysight Technologies InfiniiVision 6000L Series Low-Profile Oscilloscopes The most space efficient, and affordable LXI C compliant oscilloscopes Data Sheet Introduction Four channels in only 1U space Industry-leading performance: –– 4-channel digital storage oscilloscope (DSO) models –– Low profile, high density 1U (4.45 cm, 1.75 inches) package –– LXI class C compliant –– 100 MHz, 500 MHz and 1 GHz analog bandwidth –– Up to 4 GSa/s sample rate –– Standard 8 Mpts MegaZoom III deep memory –– Full-scale connectivity – Standard USB, LAN, GPIB interface with XGA video output –– 8-bit vertical resolution (extensible to 12 bits) –– Built-in Web browser control –– IVI-COM driver –– 100% software compatible with 6000A Series portable oscilloscopes –– Optional segmented memory application –– Optional secure environment mode The highest performance and lowest cost automated test oscilloscope in its class. 03 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Low-profile, high-density package saves rack space The InfiniiVision 6000L Series oscilloscopes provide up to 1-GHz bandwidth in a space-saving 1U-high 19-inch wide package so it saves your valuable rack space. The oscilloscopes have side and rear air vents (no top or bottom air vents) so other instruments can be mounted directly above or below them. Rack mount brackets and rack rails are standard with every unit. LXI class C compliant LAN eXtensions for Instrumentation (LXI) is the architecture for test systems that’s based on proven, widely used standards such as Ethernet. By specifying the interaction of those standards, LXI enables fast, efficient, cost-effective creation and reconfiguration of test systems. The InfiniiVision 6000L Series oscilloscopes are fully LXI class C compliant. The InfiniiVision 6000L Series oscilloscopes follow specified LAN protocols, and adhere to LXI requirements such as a built-in Web control server, IVI driver software, and more. Make the most of your rack space with an InfiniiVision 6000L Series oscilloscope. Easy system integration and configuration To simplify system development, the InfiniiVision 6000L Series oscilloscopes come standard with an IVI-COM (Interchangeable Virtual Instruments) driver, and they support easy-to-use SCPI commands. The standard Keysight Technologies, Inc. I/O Library Suite makes it easy to configure and integrate instruments into your system – even if your system includes instruments from other vendors. Establish instrument connection faster with Keysight I/O Library Suite. 04 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Built-in Web control The built-in Web server provides remote access and control of the instrument via a standard Java-enabled Web browser on your computer. You can communicate with the scope over the scope’s built-in LAN interface. Using the Web browser you can set up measurements, monitor waveforms, capture screen images and operate the scope remotely. Through the remote front panel you have access to the built-in help system that is available in eleven languages. Simply right click on the soft keys to see help for that function. You can also send SCPI commands over the LAN to control your scope. Wherever you are, your InfiniiVision 6000L Series scope is as close as the nearest Web browser. Optional secure environment mode The optional secure environment mode provides the highest level of security by ensuring that internal memory is clear of all setup and trace settings in compliance with National Industrial Security Program Operating Manual (NISPOM) Chapter 8 requirements. You can move the instrument out of a secure area with confidence. When this option is installed, it will store setups and traces to internal volatile memory only. To permanently store data, you can save it to an external memory device via the oscilloscope’s front-panel USB port. Remotely display and control your InfiniiVision 6000L oscilloscope from any Java-enabled web browser over the oscilloscope’s built-in LAN interface. Up to 12 bits of resolution High resolution mode offers up to 12 bits of resolution in realtime mode, which reduces noise and increases vertical resolution. When operating at slow time base ranges, the InfiniiVision 6000L Series oscilloscopes serially filter sequential data points and map the filtered results to the display. In certain situations, user-controlled averaging can also be used to obtain greater than 8-bits of resolution. Time base Bits of resolution < 100 nsec/div 8 500 nsec/div 9 2 µsec/div 10 10 µsec/div 11 ≥ 50 µsec/div 12 05 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Powerful acquisition with MegaZoom‑III deep memory 8 Mpt of MegaZoom deep memory comes standard so you can capture long, non-repeating signals, while maintaining high sample rates and good timing resolution. This lets you quickly zoom in on areas of interest. In single-channel mode with 8 Mpts of memory, the DSO6104L can capture a signal over a 2‑msec period with a sampling rate of 4‑GSa/s (0.25‑nsec period). The fast sample rate and deep memory ensure that all highfrequency signal components, up to the full bandwidth of the scope, are captured. MegaZoom III deep memory helps you find details buried in complex signals. You can view fast waveform updates of signals by means of an external dislpay connected to the oscilloscope’s XGA out port. 06 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Mixed signal analysis option If you work with both analog and digital circuitry, the InfiniiVision 6000L Series oscilloscope can help you see more signal activity in your designs. You can upgrade the 6000L Series oscilloscope to a 4 scope +16 logic timing channel mixed signal oscilloscope (MSO). With the MSO you can trigger on any combination of its scope and logic channels. Easy programming transition One of the biggest challenges in a new product’s life cycle is the transition of its test system from development to manufacturing. With LXI, the transition can be achieved much more easily and cost effectively than with cardcage-based systems. Engineers can use the LXI class C compliant InfiniiVision 6000A Series portable oscilloscope during the R&D phase, using the display, keypad and knobs to quickly access a wealth of measurement capabilities. When your product moves to manufacturing, you can use a system-optimized 6000L Series LXI oscilloscope without a display. Because the InfiniiVision 6000A and 6000L are 100% software compatible, your manufacturing system can use the software and test routines developed in R&D without any modification, while you save cost and rack space by moving from a standard bench-top oscilloscope to a 1U high oscilloscope without a display. The MSO option lets you see the complex interactions among your signals on up to 20 channels at the same time. The InfiniiVision 6000A and 6000L Series oscilloscopes are 100% software compatible, enabling smooth test system transition. 07 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Keysight InfiniiVision 6000L Series Oscilloscopes: The most space efficient LXI C compliant oscilloscopes Standard rack mount brackets Four channels in only 1U space Status indicators Side air vents Waveform intensity control (for external display) XGA video out port Ext Trig in, Trig out and 10 MHz ref in/out Built-in USB port AutoProbe Interface Standard LAN, USB and GPIB ports Optional 16 logic timing channels (MSO) 08 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance characteristics Scope input Channels Ch 1, 2, 3 and 4 simultaneous acquisition Bandwidth (–3 dB)* DSO6014L: DC to 100 MHz DSO6054L: DC to 500 MHz DSO6104L: DC to 1 GHz Maximum input CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms, 400 Vpk With 10073C/10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk 5 Vrms with 50 Ω input Full Scale range1 DSO6014L: 1 mV/div to 5 V/div (1 MΩ) DSO6054L: 2 mV/div to 5 V/div (1 MΩ or 50 Ω) DSO6104L: 2 mV/div to 5 V/div (1 MΩ), 2 mV/div to 1 V/div (50 Ω) Input impedance DSO6014L2: 1 MΩ ± 1% || 11pF DSO6054L/6104L: 1 MΩ ± 1% || 14pF or 50 Ω ± 1.5%, selectable Coupling AC, DC Offset range ±5 V on ranges < 10 mV/div ±25 V on ranges 10 mV/div to 200 mV/div ±75 V on ranges ≥ 200 mV/div Connector BNC BW limit DSO6014L: 20MHz DSO6054L/6104L: 25 MHz selectable Noise peak-to-peak DSO6014L: 3% full scale or 2 mV, whichever is greater DSO6054L: 3% full scale or 3.6 mV, whichever is greater DSO6104L: 3% full scale or 4.5 mV, whichever is greater DC Vertical * Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature. 1 2 1 mV/div is a magnification of 2 mV/div. 2 mV/div is a magnification of 4 mV/div setting. For vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting and 32 mV for 2 mV/div sensitivity setting. Four 50 Ω termination adapters are supplied with DSO6014L. Logic channels (with MSO option) Number of channels 16 logic timing channels – labeled D15 - D0 Maximum input frequency 250 MHz Sample rate 2 GSa/sec one pod*, 1 GSa/sec each pod Memory depth Standard memory 1 pod /both pod 8 Mpts/4 Mpts Vertical resolution 1 bit Threshold selections TTL, CMOS, ECL, user-definable (selectable by pod) Maximum input voltage ±40 V peak CAT I Glitch detection 2 ns (min pulse width) * A pod is a group of 8 digital channels. either 0-8 or 9-16 09 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance characteristics (continued) Analog to digital conversion Vertical resolution 8 bits Sample rate DSO6014L: 2 GSa/sec DSO6054L/6104L: 4 GSa/sec half channel, 2 GSa/sec each channel Equivalent-time sample rate: 400 GSa/s (when realtime mode is turned off ) Memory depth Standard 2 channels/4 channels 8 Mpts/4 Mpts Time range 5 nsec/div to 50 sec/div (DSO6014L) 1 nsec/div to 50 sec/div (DSO6054L) 500 psec/div to 50 sec/div (DSO6104L) Acquisition Acquisition mode Normal, Peak Detect, Averaging, High Resolution Peak detection DSO6014L: 1 nsec peak detect DSO6054L/6104L: 250 psec peak detect Averaging Selectable from 2,4,8,16,32,64… to 65536 High resolution mode Time base < 100 nsec/div 500 nsec/div 2 µsec/div 10 µsec/div ≥ 50 µsec/div Filter Sinx/x interpolation Bits of resolution 8 9 10 11 12 Trigger system Sources DSO6xx4L: Ch 1, 2, 3, 4, line, ext and D0 - D15 for MSO enabled DSO Modes Auto, Normal, Single Holdoff time range ~60 ns to 10 seconds Trigger jitter 15 psec rms Selections Edge, pulse width, pattern, TV, duration, sequence, CAN, LIN, USB, I2C, SPI, Nth edge burst Scope channel triggering Range (internal) ±6 div from center screen Sensitivity* < 10 mV/div: greater of 1 div or 5 mV ≥ 10mV/div: 0.6 div Coupling AC (~10 Hz), DC, noise reject, HF reject and LF reject (~ 50 kHz) * Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature. 10 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance characteristics (continued) Logic (D15 - D0) channel triggering (with MSO option) Threshold range (user defined) ±8.0 V in 10 mV increments Threshold accuracy* ±(100 mV + 3% of threshold setting) Predefined thresholds TTL = 1.4 V, CMOS = 2.5 V, ECL = –1.3 V * Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ±10 °C from firmware calibration temperature. External (EXT) triggering Input resistance 1.015 kΩ ± 5% (DSO6014L) 2.14 kΩ ± 5% (DSO6054L/6104L) Maximum input ±15 V Range ±5 V Sensitivity DC to 100 MHz: 500 mV (DSO6014L) DC to 500 MHz: 500 mV (DSO6054L/6104L) Coupling AC (~ 3.5 Hz), DC, noise reject, HF reject and LF reject (~ 50 kHz) Probe ID Auto probe sense (DSO6014L) Auto probe sense and AutoProbe interface (DSO6054L/6104L) Measurement features Automatic measurements Measurements are continuously updated. Cursors track last selected measurement Voltage (scope channels only) Peak-to-peak, maximum, minimum, average, amplitude, top, base, overshoot, preshoot, RMS, standard deviation (AC RMS) Time Frequency, period, + width, – width and duty cycle on any channels Rise time, fall time, X at max Y (time at max volts), X at min Y (time at min volts), delay, and phase on scope channels only Counter Built-in 5-digit frequency counter on any scope channel. Counts up to the scope’s bandwidth (1 GHz max). The counter resolution can be increased to 8 digits with an external 10 MHz reference. Threshold definition Variable by percent and absolute value; 10%, 50%, 90% default for time measurements Cursors Manually or automatically placed readout of horizontal (X, ∆X, 1/∆X) and vertical (Y, ∆Y). Tracking cursors provide an additional mode for cursor positioning beyond the current manual method. When cursor tracking is enabled, changing a cursor's x-axis position results in the yaxis cursor tracking the corresponding y-axis (voltage, current, etc.) value. Additionally logic or scope channels can be displayed as binary or hex values Waveform math f (g(t)) g(t): { 1, 2, 3, 4, 1-2, 1+2, 1x2, 3-4, 3+4, 3x4} f(t): { 1-2, 1+2, 1x2, 3-4, 3+4, 3x4, FFT(g(t)), differentiate d/dt g(t), integrate ∫ g(t) dt, square root √g(t) } Where 1,2,3,4 represent analog input channels 1, 2, 3, and 4 Note: Channels 3 and 4 only available on DSO6xx4L models Measurement statistics Statistical data for enabled measurements such as mean, min,max, standard deviation and count. 11 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance characteristics (continued) FFT Points Fixed at 1000 points Source of FFT Scope channels 1, 2, 3 or 4, 1+2, 1-2, 1x2 Window Rectangular, flattop, Hanning Noise floor –50 to –90 dB depending on averaging Amplitude Display in dBV, dBm at 50 Ω Frequency resolution 0.05/(time per div) Maximum frequency 50/(time per div) Storage Save/recall (non-volatile) 10 setups and traces can be saved and recalled internally. Secure environment mode (-SEC) ensures setups and traces are stored to volatile memory. Storage type and format USB 1.1 drive on front (/drive0) and rear (/drive5) panels Image formats: BMP (8 bit), BMP (24 bit) and PNG (24 bit) Data formats: X and Y (time/voltage) values in CSV, ASCII XY and binary format Trace/setup formats: Recalled I/O Standard ports USB 2.0 high speed, 10/100-BaseT LAN, IEEE488.2 GPIB, XGA video output Max transfer rate IEEE488.2 GPIB: 500 kbytes/sec USB (USBTMC-USB488): 3.5 Mbytes/sec 100 Mbps LAN (TCP/IP): 1 Mbytes/sec Remote front panel Built-in help language support for English, German, French, Russian, Japanese, Traditional Chinese, Simplified Chines, Korean, Spanish, Portuguese and Italian Throughput of scope channels 100,000 waveforms/sec in real-time mode to remote monitor Resolution of video output XGA Waveform controls Waveform intensity of 256 levels, vectors on/off, infinite persistence on/off General characteristics Rack mounting Supplied with all necessary hardware (except tools) for installation into a standard EIA 19-inch rack Physical size 43.5 cm W x 27 cm D x 4.2 cm H (without brackets) Weight Net: 2.45 kg (5.4 lbs.) Shipping: 6.2 kg (13.6 lbs.) Probe comp output Frequency ~1.2 kHz Amplitude ~2.5 V 12 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Performance characteristics (continued) General characteristics (continued) Trigger out When Triggers is selected (delay ~17 ns) When Source Frequency or Source Frequency/8 is selected 0 to 5 V into high impedance 0 to 2.5 V into 50 Ω 0 to 580 mV into high impedance 0 to 290 mV into 50 Ω Max frequency output 350 MHz (in source frequency mode when terminated in 50 Ω) 125 MHz (in source frequency/8 mode when terminated in 50 Ω) 10 MHz ref in/out TTL out, 180 mV to 1 V amplitude within 0 to 2 V offset Power requirements Line voltage range 100-240 V, 50/60 Hz auto ranging Line frequency 50/60 Hz Power usage 80 W max Environmental characteristics Ambient temperature Operating -10 °C to +50 °C; non-operating -40 °C to +70 °C Humidity Operating 95% RH at 40 °C for 24 hours; Non-operating 90% RH at 65 °C for 24 hours Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft) Vibration Keysight class GP and MIL-PRF-28800F; Class 3 random Shock axis Keysight class GP and MIL-PRF-28800F; (operating 30 g, 1/2 sine, 11-ms duration, 3 shocks/ Pollution degree Normally only dry non-conductive pollution occurs. Occasionally a temporary conductivity caused by condensation must be expected. Indoor use This instrument is rated for indoor use only along major axis. Total of 18 shocks) Other Installation categories CAT I EMC IEC 61326-1:1997, EN 61326-1:1997 Safety IEC 61010-1:2001, EN 61010-1:2001 Canada: CSA-C22.2 No. 1010.1:1992 UL 61010-1:2003 Supplementary information The product herewith complies with the requirements of the LowVoltage Directive 73/23/EEC and the EMC Directive 89/336/EEC, and carries the CE-marking accordingly. 13 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Ordering information Model number Description DSO6104L 1 GHz 4-ch DSO DSO6054L 500 MHz 4-ch DSO DSO6014L 100 MHz 4-ch DSO Accessories included: Model number DSO6104L/6054L DSO6014L User’s guide, Service guide, Programmer’s guide √ √ Power cord √ √ 10:1 divider passive probe per scope channel √ √ Keysight IO Libraries Suite 14.2 √ √ GPIB extender √ √ 50 Ω termination adapter √ Crossover LAN cable √ √ Rack mount hardware √ √ Available options Option number Description N2914A* MSO upgrade kit N2915A* MSO upgrade kit √ N5427A(-SEC) Secure environment mode √ √ N5423A(-LSS) I C/SPI triggering and decode option √ √ N5424A(-AMS) CAN/LIN triggering and decode option √ √ N5454A(- SGM) Segmented memory application √ √ N5457A (- 232) RS-232/UART triggering and decode √ √ N5468A I S Triggering and decode option √ √ N5455A Mask testing- limit √ √ * 2 2 Includes a 54620-68701 logic cable kit, a label and an upgrade key code to activate the MSO features DSO6014L DSO6054L/6104L √ 14 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Ordering information (continued) Warranty and calibration options Contact local sales office for prices of extended options. Passive probes Product number Description 10070C 1:1 passive probe with ID 10074C 10:1 150MHz passive probe with ID (shipped standard with DSO6014L model) 10073C 10:1 500 MHz passive probe with ID (shipped standard with DSO6054L/6104L models) Current probes Product number Description 1146A 100-kHz current probe, ac/dc 1147B 50-MHz/15A current probe, ac/dc with AutoProbe interface (power supply not required) N2780A 2MHz/500A current probe, AC/DC N2781A 10MHz/150A current probe, AC/DC N2782A 50MHz/30A current probe, AC/DC N2783A 100MHz/30A current probe, AC/DC N2779A Power supply for N278xA current probes High-voltage probes Product number Description 10076A 100:1, 4 kV, 250-MHz probe with ID N2771A 1000:1, 15 kV, 50-MHz high-voltage probe Logic probes Product number Description 10085-68701 16:16 logic cable and terminator 54620-68701 16:2 x 8 logic input probe assembly 15 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Ordering information (continued) Active single-ended probes Product number Description 1144A 800-MHz active probe 1145A 2-channel 750-MHz active probe 1142A Power supply for 1144A and 1145A 1156A 1.5-GHz active probe with AutoProbe interface (power supply not required) Active differential probes Product number Description N2791A 25 MHz differential probe 1130A 1.5 GHz InfiniiMax differential probe amplifier with AutoProbe interface (Order one or more InfiniiMax probe heads or connectivity kits per amplifier.) 16 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Related Literature Publication Title Publication Type Publication Number Keysight 6000 Series Oscilloscopes Data sheet 5989-2000EN/EUS Keysight 6000 Series and 54600 Series Oscilloscope Probes and Accessories Data sheet 5968-8153EN/EUS Option SEC N5427A Secure Environment Mode Option Data sheet 5968-5558EN Next-Generation Test Systems Application note 5989-2802EN LXI: Going Beyond GPIB, PXI and VXI Application note 5989-4371EN Optimizing Test Systems for Highest Throughput, Lowest Cost and Ease of Integration with LXI Instruments Open the Door to Simpler System Creation Application note5984 98 -6EN Brochure N5454A Segmented Memory Acquisition for Keysight InfiniiVision Series Oscilloscopes Keysight Triggering and Hardware-based Decode (Option SND) for Keysight InfiniiVision Oscilloscoopes Data sheet 5989-2042EN 5989-7833EN Data sheet5990-4198EN Keysight Technologies Oscilloscopes Multiple form factors from 20 MHz to >90 GHz | Industry leading specs | Powerful applications 17 | Keysight | InfiniiVision 6000L Series Low-Profile Oscilloscopes - Data Sheet Evolving Since 1939 Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight. myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.keysight.com/find/emt_product_registration Register your products to get up-to-date product information and find warranty information. Keysight Services www.keysight.com/find/service Keysight Services can help from acquisition to renewal across your instrument’s lifecycle. Our comprehensive service offerings—onestop calibration, repair, asset management, technology refresh, consulting, training and more—helps you improve product quality and lower costs. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to ten years of protection and no budgetary surprises to ensure your instruments are operating to specification, so you can rely on accurate measurements. Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight’s measurement expertise and product breadth, combined with channel partner convenience. For more information on Keysight Technologies’ products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 11 2626 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-9-7-17) DEKRA Certified ISO9001 Quality Management System www.keysight.com/go/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2015 Quality Management System This information is subject to change without notice. © Keysight Technologies, 2011 - 2017 Published in USA, December 1, 2017 5989-5470EN www.keysight.com