IFB122 NEW Robust RISC-based DIN-rail Fanless Embedded System with i.MX 6UL Processor 2 COM, 2 LANs and DIO (2-IN/1-OUT) Features ● RISC-based (i.MX 6UltraLite) processor 528 MHz ● 256MB DDR3 SDRAM onboard ● 4GB eMMC flash onboard ● 1 Wireless (Wi-Fi or 3G/4G) ● 2 digital inputs and 1 digital output ● 9 ~ 48 VDC wide range power input with terminal block ● Embedded embedded Linux operating system (Yocto) ● Fanless design ● Wide operating temperature range from -40°C to +70°C Reset button LED for system status 2 x LAN LED for user programming 2 x COM Front view 1 DIO ( 2-IN/1-OUT) & Console i.MX6UL Ext. Temp IP30 Fanless Low Power Introduction Console PIN The IFB122 cost-effective DIN-rail fanless embedded system utilizes the low power RISCbased (i.MX6UL) processor and is designed to withstand temperatures ranging from -40°C to +70°C for using in extreme operating environment and industrial automation applications. DI PIN Relay PIN DO PIN Bottom Antenna 2 The IFB122 features two RS-232/422/485 serial ports, dual LANs, two digital input channels, one digital output channel, LED for user programming and one eMMC onboard 4 GB. Two power paths input minimize the risk of data loss in the event of a single power failure. Its vertical DIN-rail form factor makes it easy to install the system in a small cabinet. The ready-to-run IFB122 is specially designed for remote control/monitoring management applications like unmanned control room, industrial machine, automatic parking lot, traffic cabinet and more. Antenna 1 USB port Power port Rear view Top view Specifications Construction CPU System Memory System I/O Outlet 369 Extruded aluminum and heavy-duty steel, IP30 Freescale i.MX 6UL processor, ARM® Cortex®-A7 @ 528 MHz 1 x DDR3-1600 onboard, 256 MB Serial Port 2 x RS-232/422/485 LAN 2 x 10/100 Mbps Ethernet Magnetic isolation protection 1.5KV Relay 1 x Relay USB 1 x USB 2.0 DIO 1 x DIO (2-IN/1-OUT) DI: Wet DO: Wet DI: Digital input levels for wet contacts: -Logic level 0: Close to GND -Logic level 1: +0.7~+24 V max. DO: Output channels: 1, sink type Output current: max. 200 mA per channel On-state voltage: 24 VDC nominal, open Console Port Yes For user setting with debug EEPROM 1 x EEPPROM (2 Kb) Wireless 1 x PCI Express Mini Card socket 1 x SIM card socket Watchdog Timer LEDs Storage Installation Power Supply Operating Temperature Storage Temperature Humidity Vibration Endurance Dimensions Weight (net/gross) Installation OS Linux Certificate WDT 1: 0.5 to 128 seconds with a time resolution of 0.5 seconds 1 x LED for power status 1 x LED for reset status 4 x LED (programing by client) 1 x eMMC 4GB flash onboard DIN-rail 9 ~ 48 VDC power input range -40°C ~ +70°C (-40°F ~ +158°F) -45°C ~ +85°C (-49°F ~ +185°F) 10% ~ 95% 2G @5 ~ 500MHz, amplitude 0.35ms 31 mm (1.22") (W) x 100 mm (3.94") (D) x 125 mm (4.92") (H) 0.3 kg (0.66 lb)/0.44 kg (0.97 lb) DIN-rail, wall mount OS : Yocto 1.8.1 (Fido), Ubuntu 14.04 Kernel: 3.14.52 FCC Part 15 Heavy Industrial CE Updated Jun. 13, 2017. * All specifications and photos are subject to change without notice. Ordering Information Standard IFB122-FL-DC Robust DIN-rail fanless embedded system with i.MX 6UL processor, 2 COM, 2 LANs and DIO (2-in/1-out) (-40°C to +70°C) Optional Wall mount kit Wireless (3G/GPS or Wi-Fi) module 0 1 2 DIN-rail Embedded Systems 3 4 Dimensions 5 6 7 8 9 10 11 Updated Jun. 13, 2017. * All specifications and photos are subject to change without notice. a x i o m te k . c o m © 2017 Axiomtek Co., Ltd. All rights reserved. 370