Card Connectors Series CNS PCMCIA II Slot - Single Deck (SMT Type) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Soldering Temp.: 1,000MΩ min. 500V ACrms for 1 minute 40mΩ max. 0.5A per contact Rear socket: 220°C /40 sec., 240°C peak CNS - S T P -A R -8 3 -A- 1 Series S = Single Deck PCB Mounting Style: T = Top B = Bottom Materials and Finish Insulator: Contact: Plating: Plate: Side Contact: Plating: PBT, glass filled (UL94V-0) Phosphor Bronze Header: Card side - Au 0.3µm over Ni 2.0µm Rear side - Au flash over Ni 2.0µm Rear Socket: Mating side - Au 0.2µm over Ni 1.0µm Solder side - Au flash over Ni 1.0µm Stainless Steel Phosphor Bronze Au over Ni Features SMT connector makes assembly and rework easier Small, light and low profile connector meets all kinds of PC card system requirements Various product combinations single or double deck, right or left eject lever, polarization styles, various stand-off heights, fully supports the customer’s design needs Convenience of PC card removal with push type eject lever Voltage Style: P = 3.3V / 5V Card A = Plastic Lever B = Metal Lever C = Foldable Lever D = 2 Step Lever E = Without Ejector Eject Lever: R = Right L = Left *Height of Stand-off: 1 = 0mm 4 = 2.2mm 8 = 5.0mm Nut Insert: 0 = None (on request) 1 = Header (on request) 2 = Guide (on request) 3 = Header / Guide (standard) Shield Plate: A = None B = Top C = Bottom D = Top / Bottom Kapton Film: no mark = None 1 = Top 2 = Bottom 3 = Top and Bottom *Stand-off products 0.0 and 2.2mm are subject to a minimum order quantity of 1,120 pcs. Part Number (Details) for Rear Socket PCMCIA - 1260 - * Packing Number Available Types 0 = Without Kapton Film (Tray) 1 = With Kapton Film (Tray) 9 = With Kapton Film (Tape & Reel,1,500 pcs. per reel) A-46 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Card Connectors Series CNS PCMCIA II Slot - Single Deck (SMT Type) Example: Single Deck SMT Fixing with 5.0mm Stand-off Rear Socket PCMCIA II Slot 5.0 A Rear Socket Section Details Section A - A Contact Dimensions at A Contacts A1, A17, A34, A35, A51 and A68 Contacts A36 and A67 All other contacts Length 5.00 ±0.1 3.50 ±0.1 4.25 ±0.1 Section B - B Example PCB Layout With Stand-off Top View Without Stand-off Please Note: this hole for stand-off 2.2mm and 5.0mm lies on the center line with the SMD pad Detail A Trading Division SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors A-47